Infiniti EX35. Manual — part 454
DLK-30
< FUNCTION DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
INTELLIGENT KEY SYSTEM
REMOTE KEYLESS ENTRY FUNCTION : Component Parts Location
INFOID:0000000003738685
1.
BCM M118, M119, M120, M121,
M122, M123
2.
Combination meter M53
3.
Key slot M22
4.
IPDM E/R E5, E6
5.
Remote key less entry receiver
M104
6.
Control device (detention switch)
M137
JMKIA2222ZZ
INTELLIGENT KEY SYSTEM
DLK-31
< FUNCTION DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
7.
Front door switch (driver side) B16
8.
Front door lock assembly (driver
side) D15
9.
Fuel lid lock actuator B242
10. Back door opener switch D114
11.
Horn (low) E61, E62
12.
Horn (high) E69, E70
13. Intelligent Key warning buzzer E57
A.
Dash side lower (passenger side)
B.
Engine room dash panel (RH)
C.
Behind the instrument lower pan-
el (driver side)
D.
View with center console assembly
removed
E.
View with front door finisher (LH) is
removed
F.
View luggage side finisher lower
(RH) is removed
G.
View with front bumper is removed
1.
Push-button ignition switch (push
switch) M50
2.
Inside key antenna (instrument center)
M131
3.
Unified meter and A/C amp.
M66, M67
4.
Inside key antenna (console)
M146
5.
Inside key antenna (luggage room) B228 6.
Front outside handle LH (request
switch)
D13
7.
Front outside handle LH (outside
key antenna) D14
8.
Outside key antenna (back door) D118
9.
Back door lock assembly D113
JMKIA2223ZZ
DLK-32
< FUNCTION DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
INTELLIGENT KEY SYSTEM
REMOTE KEYLESS ENTRY FUNCTION : Component Description
INFOID:0000000003728840
WELCOME LIGHT FUNCTION
WELCOME LIGHT FUNCTION : System Description
INFOID:0000000003759266
CONDITION OF SEARCHING
If all following conditions are satisfied, BCM search Intelligent Key by outside key antenna (front outside han-
dle LH/RH and back door). BCM has timer to search for 14 days (every 0.3 sec.). If run the engine, the timer
will be reset.
OPERATION PROCEDURE
BCM search outside key antenna (front outside handle LH/RH and back door) detection area. If registered
Intelligent Key is detected, BCM turn ON the room lamp and puddle lamp.
For detailed description after turning ON the lamps, refer to
.
SYSTEM SETTING PROCEDURE
Setting of welcome light function can be changed by following procedure. (for system setting by CONSULT-III:
refer to
DLK-49, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
.)
1.
Confirm Intelligent Key is removed from key slot.
2.
Turn ignition switch ON and press and hold request switch (driver side) more than 5 seconds.
3.
Confirm sounds of buzzer (combination meter).
10. Back door opener request switch
D116
A.
View with luggage floor finisher
front is removed
B.
View with back door finisher inner is re-
moved
Item
Function
BCM
Controls the door lock function and room lamp function.
Door lock actuator
Outputs lock/unlock signal from BCM and locks/unlocks each door.
Remote keyless entry receiver
Receives lock/unlock signal from the Intelligent Key, and then transmits to BCM.
Unified meter and A/C amp.
• Receive buzzer signal from BCM via CAN communication line, and sounds the buzzer.
• Transmits vehicle speed signal to BCM via CAN communication line.
Combination meter
Display, buzzer (combination meter) and KEY warning lamp are installed to combination meter.
Intelligent Key
Transmits button operation to remote keyless entry receiver.
Function
Condition
Welcome light function
• System setting is active.
• All doors are closed.
• Ignition position is OFF.
• There is no Intelligent Key inside vehicle.
• Shift position is P position.
• All doors are closed and locked (or auto lock timer is running).
Pi, Pi, Pi··· (approx. 1.2 sec.):
Welcome light function is OFF.
Pi, Pi, Pi···(approx. 2.4 sec.):
Welcome light function is ON.
INTELLIGENT KEY SYSTEM
DLK-33
< FUNCTION DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
WELCOME LIGHT FUNCTION : Component Parts Location
INFOID:0000000003759267
1.
BCM M118, M119, M120, M121,
M122, M123
2.
Combination meter M53
3.
Key slot M22
4.
IPDM E/R E5, E6
5.
Remote key less entry receiver
M104
6.
Control device (detention switch)
M137
JMKIA2222ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст