Infiniti EX35. Manual — part 494
DLK-190
< SYMPTOM DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
ACC WARNING DOES NOT OPERATE
ACC WARNING DOES NOT OPERATE
Description
INFOID:0000000003729064
NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to
• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm
the list above twice in order to ensure proper operation. Refer to
DLK-38, "WARNING FUNCTION : System
.
• Door lock function is normal.
Diagnosis Procedure
INFOID:0000000003729065
1.
CHECK POWER POSITION
Check if ignition switch position is changing or not.
Does ignition switch position change?
YES
>> GO TO 2.
NO
>> Check DTC for BCM. Refer to
2.
CHECK BUZZER (COMBINATION METER)
Check buzzer (combination meter).
Refer to
DLK-103, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK COMBINATION METER DISPLAY FUNCTION
Check combination meter display function.
Refer to
DLK-102, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-38, "Intermittent Incident"
.
NO
>> GO TO 1.
TAKE AWAY WARNING DOES NOT OPERATE
DLK-191
< SYMPTOM DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
TAKE AWAY WARNING DOES NOT OPERATE
DOOR IS OPEN
DOOR IS OPEN : Description
INFOID:0000000003729066
NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to
• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm
the list above twice in order to ensure proper operation. Refer to
DLK-38, "WARNING FUNCTION : System
.
• Door lock function is normal.
DOOR IS OPEN : Diagnosis Procedure
INFOID:0000000003729067
1.
CHECK POWER POSITION
Check if ignition switch position is changing or not.
Does ignition switch position change?
YES
>> GO TO 2.
NO
>> Check DTC for BCM. Refer to
2.
CHECK BUZZER (COMBINATION METER)
Check buzzer (combination meter).
Refer to
DLK-103, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK COMBINATION METER DISPLAY
Check combination meter display.
Refer to
DLK-102, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK DOOR SWITCH
Check door switch (driver side).
Refer to
DLK-63, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CHECK INTELLIGENT KEY WARNING BUZZER
Check Intelligent Key warning buzzer.
Refer to
DLK-92, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace the malfunctioning parts.
6.
CHECK INSIDE KEY ANTENNA
Check inside key antenna.
Refer to
(luggage room).
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> Repair or replace the malfunctioning parts.
DLK-192
< SYMPTOM DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
TAKE AWAY WARNING DOES NOT OPERATE
7.
CHECK KEY SLOT ILLUMINATION
Check key slot illumination.
Refer to
DLK-98, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 8.
NO
>> Repair or replace the malfunctioning parts.
8.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-38, "Intermittent Incident"
.
NO
>> GO TO 1.
ANY DOOR OPEN TO ALL DOORS CLOSED
ANY DOOR OPEN TO ALL DOORS CLOSED : Description
INFOID:0000000003729068
NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to
• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm
the list above twice in order to ensure proper operation. Refer to
DLK-38, "WARNING FUNCTION : System
.
• Door lock function is normal.
ANY DOOR OPEN TO ALL DOORS CLOSED : Diagnosis Procedure
INFOID:0000000003729069
1.
CHECK DOOR SWITCH
Check door switch (driver side).
Refer to
DLK-63, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK COMBINATION METER DISPLAY
Check combination meter display.
Refer to
DLK-102, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK INSIDE KEY ANTENNA
Check inside key antenna.
Refer to
(console).
(luggage room).
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-38, "Intermittent Incident"
.
NO
>> GO TO 1.
PUSH-BUTTON IGNITION SWITCH OPERATION
TAKE AWAY WARNING DOES NOT OPERATE
DLK-193
< SYMPTOM DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
PUSH-BUTTON IGNITION SWITCH OPERATION : Description
INFOID:0000000003729070
NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to
• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm
the list above twice in order to ensure proper operation. Refer to
DLK-38, "WARNING FUNCTION : System
.
• Door lock function is normal.
PUSH-BUTTON IGNITION SWITCH OPERATION : Diagnosis Procedure
INFOID:0000000003729071
1.
CHECK POWER POSITION
Check if ignition switch position is changing or not.
Does ignition switch position change?
YES
>> GO TO 2.
NO
>> Check DTC for BCM. Refer to
2.
CHECK PUSH-BUTTON IGNITION SWITCH
Check push-button ignition switch.
Refer to
PCS-65, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK BUZZER (COMBINATION METER)
Check buzzer (combination meter).
Refer to
DLK-103, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK COMBINATION METER DISPLAY
Check combination meter display.
Refer to
DLK-102, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CHECK INSIDE KEY ANTENNA
Check inside key antenna.
Refer to
(luggage room).
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace the malfunctioning parts.
6.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-38, "Intermittent Incident"
.
NO
>> GO TO 1.
TAKE AWAY THROUGH WINDOW
TAKE AWAY THROUGH WINDOW : Description
INFOID:0000000003729072
NOTE:
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст