Infiniti EX35. Manual — part 893
LUBRICANT
HA-31
< ON-VEHICLE MAINTENANCE >
C
D
E
F
G
H
J
K
L
M
A
B
HA
N
O
P
*1: No addition of lubricant is needed if the refrigerant leakage is small.
Lubricant Adjusting Procedure for Compressor Replacement
INFOID:0000000003545468
1.
Check recovery/recycling recharging equipment gauges before connecting recovery/recycling recharging
equipment to vehicle. No refrigerant pressure should be displayed. Recover refrigerant from equipment
lines if NG.
2.
Connect recovery/recycling recharging equipment to vehicle. Confirm refrigerant purity in supply tank
using recovery/recycling recharging equipment and refrigerant identifier. Refer to
if NG.
3.
Confirm refrigerant purity in vehicle A/C system using recovery/recycling recharging equipment and refrig-
erant identifier. If NG, refer to
HA-12, "Working with HFC-134a (R-134a)"
.
4.
Discharge refrigerant into the recovery/recycling recharging equipment. Measure lubricant discharged into
the recovery/recycling recharging equipment.
5.
Drain the lubricant from the old (removed) compressor into a graduated container and recover the amount
of lubricant drained.
6.
Drain the lubricant from the new compressor into a separate. Then clean container.
7.
Measure an amount of new lubricant installed equal to amount drained from old compressor. Add this
lubricant to new compressor through the suction port opening.
8.
Measure an amount of new lubricant equal to the amount recovered during discharging. Add this lubricant
to new compressor through the suction port opening.
9.
Add another 5 m (0.2 US fl oz., 0.2 Imp fl oz.) of lubricant at this time if the liquid tank also needs to be
replaced.
In case of refrigerant leakage
30 (1.0, 1.1)
Large leakage
—
Small leakage
*1
Part replaced
Lubricant to be added to system
Remarks
Amount of lubricant
m
(US fl oz., Imp fl oz.)
HA-32
< ON-VEHICLE MAINTENANCE >
LUBRICANT
Do not add this 5 m (0.2 US fl oz., 0.2 Imp fl oz.) of lubricant when replacing the compressor only.
RJIA3578E
REFRIGERATION SYSTEM
HA-33
< ON-VEHICLE MAINTENANCE >
C
D
E
F
G
H
J
K
L
M
A
B
HA
N
O
P
REFRIGERATION SYSTEM
Inspection
INFOID:0000000003545469
1.
CHECK BLOWER MOTOR OPERATION
Check blower motor operation. Refer to
HAC-80, "WITHOUT LEFT AND RIGHT VENTILATION TEMPERA-
TURE SEPARATELY CONTROL SYSTEM : Component Function Check"
(Without left and right ventilation
temperature separately control system) or
HAC-84, "WITH LEFT AND RIGHT VENTILATION TEMPERA-
TURE SEPARATELY CONTROL SYSTEM : Component Function Check"
(With left and right ventilation tem-
perature separately control system).
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the parts according to the inspection results.
2.
CHECK COMPRESSOR OPERATION
Check compressor operation. Refer to
HAC-88, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the parts according to the inspection results.
3.
CHECK REFRIGERANT CYCLE PRESSURE
Connect recovery/recycling recharging equipment to the vehicle and perform the diagnosis with the gauge
pressure. Refer to
HA-7, "Trouble Diagnosis For Unusual Pressure"
Is the inspection result normal?
YES
>> Perform the performance test. Refer to
.
NO
>> Repair or replace the parts according to the inspection results.
Performance Chart
INFOID:0000000003545470
TEST CONDITION
Testing must be performed as per the following:
TEST READING
Recirculating-to-discharge Air Temperature Table
Vehicle condition
Indoors or in the shade (in a well-ventilated place)
Doors
Closed
Door windows
Open
Hood
Open
Temperature control switch or dial
Max. COLD
Mode switch
(Ventilation) set
Intake switch
(Recirculation) set
Fan (blower) speed
Max. speed set
Engine speed
Idle speed
Operate the air conditioning system for 10 minutes before taking measurements.
Inside air (Recirculating air) at blower assembly inlet
Discharge air temperature at center ventilator
°
C (
°
F)
Relative humidity
%
Air temperature
°
C (
°
F)
50 - 60
20 (68)
5.1 - 7.1 (41 - 45)
25 (77)
8.4 - 10.9 (47 - 52)
30 (86)
14.5 - 17.5 (58 - 64)
HA-34
< ON-VEHICLE MAINTENANCE >
REFRIGERATION SYSTEM
Ambient Air Temperature-to-operating Pressure Table
Refrigerant Leakages
INFOID:0000000003545471
Perform a visual inspection of all refrigeration parts, fittings, hoses and components for signs of A/C lubricant
leakage, damage and corrosion. A/C lubricant leakage may indicate an area of refrigerant leakage. Allow
extra inspection time in these areas when using either an electrical leak detector or fluorescent dye leak
detector (SST: J-42220).
Confirm the leakage with an electrical leak detector if dye is observed. It is possible a prior leakage was
repaired and not properly cleaned.
Do not stop when one leakage is found but continue checking for additional leakages at all system compo-
nents and connections when searching for leakages.
Move the probe along the suspected leakage area at 1 to 2 inches per second and no further than 1/4 inch
from the component when searching for refrigerant leakages using an electrical leak detector.
CAUTION:
Moving the electrical leak detector probe slower and closer to the suspected leakage area improves
the chances of finding a leakage.
60 - 70
20 (68)
7.1 - 9.1 (45 - 48)
25 (77)
10.9 - 13.4 (52 - 56)
30 (86)
17.5 - 20.5 (64 - 69)
Ambient air
High-pressure (Discharge side)
kPa (kg/cm
2
, psi)
Low-pressure (Suction side)
kPa (kg/cm
2
, psi)
Relative humidity
%
Air temperature
°
C (
°
F)
50 - 70
20 (68)
822 - 1,010
(8.4 - 10.3, 119.2 - 146.5)
215 - 265
(2.2 - 2.7, 31.2 - 38.4)
25 (77)
941 - 1,151
(9.6 - 11.7, 136.5 - 166.9)
198 - 240
(2.0 - 2.4, 28.7 - 34.8)
30 (86)
1,100 - 1,348
(11.2 - 13.7, 159.5 - 195.5)
230 - 280
(2.3 - 2.9, 33.4 - 40.6)
35 (95)
1,222 - 1,498
(12.5 - 15.3, 177.2 - 217.3)
297 - 362
(3.0 - 3.7, 43.1 - 52.5)
40 (104)
1,445 - 1,770
(14.7 - 18.0, 209.6 - 256.7)
302 - 370
(3.1 - 3.8, 43.8 - 53.7)
Inside air (Recirculating air) at blower assembly inlet
Discharge air temperature at center ventilator
°
C (
°
F)
Relative humidity
%
Air temperature
°
C (
°
F)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст