Infiniti EX35. Manual — part 1238
SUNROOF UNIT ASSEMBLY
RF-77
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
L
M
A
B
RF
N
O
P
SUNROOF UNIT ASSEMBLY
Exploded View
INFOID:0000000003545369
REMOVAL
DISASSEMBLY
1.
Glass lid
2.
TORX bolt
3.
Inner blind (LH/RH)
4.
Drain hose (front)
5.
Drain connector (front)
6.
Sunroof motor assembly
7.
Sunroof bracket (LH/RH)
8.
Drain hose (rear)
9.
Drain connector (rear)
10. Sunroof unit assembly
JMKIA2041ZZ
RF-78
< ON-VEHICLE REPAIR >
SUNROOF UNIT ASSEMBLY
Removal and Installation
INFOID:0000000003545370
REMOVAL
CAUTION:
• Always work with a helper.
• Fully close the glass lid, before removal, then do not operate sunroof motor assembly after removal.
• When taking sunroof unit assembly out, use cloths to protect the seats and trim from damage.
1.
Remove the headlining. Refer to
INT-30, "SUNROOF : Removal and Installation"
2.
Remove the glass lid. Refer to
RF-73, "Removal and Installation"
3.
Remove the sunroof motor assembly. Refer to
RF-75, "Removal and Installation"
4.
Disconnect drain hoses.
5.
Remove the assistance grip brackets.
6.
Remove the sunroof brackets (LH/RH).
1.
Rear drain
2.
Wind deflector
3.
Sunshade stopper (LH/RH)
4.
Sunroof frame
5.
Sunshade
JMKIA2042ZZ
SUNROOF UNIT ASSEMBLY
RF-79
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
L
M
A
B
RF
N
O
P
7.
Remove nuts from the front end and side rail, and then remove sunroof unit assembly from roof panel.
8.
Remove sunroof unit assembly through the back door while being careful not to damage the seats and
trim.
INSTALLATION
CAUTION:
After installing the sunroof unit assembly and glass lid, perform the leak test and check that there is
no malfunction.
1.
Bring sunroof unit into back door.
2.
Temporarily tighten the mounting nuts to the side rail of sunroof unit assembly.
3.
Temporarily tighten the mounting nuts to the front end of sunroof unit assembly.
4.
Temporarily tighten the mounting bolts to the sunroof brackets (LH/RH)
5.
Tighten the installation points diagonally excluding the installation points of the sunroof brackets around
the roof opening.
6.
Tighten the mounting nuts to the front end and side rail.
7.
Tighten the sunroof bracket bolts of the vehicle side, and then tighten the bolt of the rail side.
8.
Install the assistance grip bracket.
9.
Install the sunroof motor assembly. Refer to
RF-75, "Removal and Installation"
10. Install the glass lid. Refer to
RF-73, "Removal and Installation"
.
NOTE:
After installation, perform fitting adjustment. Refer to
.
11. Connect drain hoses.
12. Install the headlining. Refer to
INT-30, "SUNROOF : Removal and Installation"
.
Disassembly and Assembly
INFOID:0000000003545371
DISASSEMBLY
1.
Remove the screw, and then rear drain.
2.
Remove sunshade. Refer to
RF-80, "Removal and Installation"
ASSEMBLY
Assemble in the reverse order of disassembly.
RF-80
< ON-VEHICLE REPAIR >
SUNSHADE
SUNSHADE
Exploded View
INFOID:0000000003545372
Removal and Installation
INFOID:0000000003545373
REMOVAL
1.
Remove the headlining. Refer to
INT-30, "SUNROOF : Removal and Installation"
1.
Rear drain
2.
Wind deflector
3.
Sunshade stopper (LH/RH)
4.
Sunroof frame
5.
Sunshade
JMKIA2042ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст