Infiniti EX35. Manual — part 1543
WW-24
< COMPONENT DIAGNOSIS >
FRONT WIPER MOTOR LO CIRCUIT
FRONT WIPER MOTOR LO CIRCUIT
Component Function Check
INFOID:0000000003138983
1.
CHECK FRONT WIPER LO OPERATION
IPDM E/R AUTO ACTIVE TEST
1.
Start IPDM E/R auto active test. Refer to
PCS-11, "Diagnosis Description"
2.
Check that the front wiper operates at the LO operation.
CONSULT-III ACTIVE TEST
1.
Select “FRONT WIPER” of IPDM E/R active test item.
2.
With operating the test item, check front wiper operation.
Is front wiper (LO) operation normally?
YES
>> Front wiper motor LO circuit is normal.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000003138984
1.
CHECK FRONT WIPER MOTOR (LO) OUTPUT VOLTAGE
CONSULT-III ACTIVE TEST
1.
Turn the ignition switch OFF.
2.
Disconnect front wiper motor connector.
3.
Turn the ignition switch ON.
4.
Select “FRONT WIPER” of IPDM E/R active test item.
5.
With operating the test item, check voltage between IPDM E/R harness connector and ground.
Is the measurement value normal?
YES
>> GO TO 2.
NO
>> Replace IPDM E/R.
2.
CHECK FRONT WIPER MOTOR (LO) OPEN CIRCUIT
1.
Turn the ignition switch OFF.
2.
Disconnect IPDM E/R connector.
3.
Check continuity between IPDM E/R harness connector and front wiper motor harness connector.
Does continuity exist?
YES
>> GO TO 3.
NO
>> Repair the harness or connector.
3.
CHECK FRONT WIPER MOTOR (LO) SHORT CIRCUIT
Check continuity between IPDM E/R harness connector and ground.
Lo
: Front wiper (LO) operation
Off
: Stop the front wiper.
Terminals
Test item
Voltage
(Approx.)
(+)
(-)
IPDM E/R
Ground
FRONT WIPER
Connector
Terminal
E5
4
Lo
Battery
voltage
Off
0 V
IPDM E/R
Front wiper motor
Continuity
Connector
Terminal
Connector
Terminal
E5
4
E42
1
Existed
FRONT WIPER MOTOR LO CIRCUIT
WW-25
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
Does continuity exist?
YES
>> Repair the harness or connector.
NO
>> Replace front wiper motor.
IPDM E/R
Ground
Continuity
Connector
Terminal
E5
4
Not existed
WW-26
< COMPONENT DIAGNOSIS >
FRONT WIPER MOTOR HI CIRCUIT
FRONT WIPER MOTOR HI CIRCUIT
Component Function Check
INFOID:0000000003138985
1.
CHECK FRONT WIPER HI OPERATION
IPDM E/R AUTO ACTIVE TEST
1.
Start IPDM E/R auto active test. Refer to
PCS-11, "Diagnosis Description"
2.
Check that the front wiper operates at the HI operation.
CONSULT-III ACTIVE TEST
1.
Select “FRONT WIPER” of IPDM E/R active test item.
2.
With operating the test item, check front wiper operation.
Is front wiper (HI) operation normally?
YES
>> Front wiper motor HI circuit is normal.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000003138986
1.
CHECK FRONT WIPER MOTOR (HI) OUTPUT VOLTAGE
CONSULT-III ACTIVE TEST
1.
Turn the ignition switch OFF.
2.
Disconnect front wiper motor connector.
3.
Turn the ignition switch ON.
4.
Select “FRONT WIPER” of IPDM E/R active test item.
5.
With operating the test item, check voltage between IPDM E/R harness connector and ground.
Is the measurement value normal?
YES
>> GO TO 2.
NO
>> Replace IPDM E/R.
2.
CHECK FRONT WIPER MOTOR (HI) OPEN CIRCUIT
1.
Turn the ignition switch OFF.
2.
Disconnect IPDM E/R connector.
3.
Check continuity between IPDM E/R harness connector and front wiper motor harness connector.
Does continuity exist?
YES
>> GO TO 3.
NO
>> Repair the harness or connector.
3.
CHECK FRONT WIPER MOTOR (HI) SHORT CIRCUIT
Check continuity between IPDM E/R harness connector and ground.
Hi
: Front wiper (HI) operation
Off
: Stop the front wiper.
Terminals
Test item
Voltage
(Approx.)
(+)
(-)
IPDM E/R
Ground
FRONT WIPER
Connector
Terminal
E5
5
Hi
Battery
voltage
Off
0 V
IPDM E/R
Front wiper motor
Continuity
Connector
Terminal
Connector
Terminal
E5
5
E42
4
Existed
FRONT WIPER MOTOR HI CIRCUIT
WW-27
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
Does continuity exist?
YES
>> Repair the harness or connector.
NO
>> Replace front wiper motor.
IPDM E/R
Ground
Continuity
Connector
Terminal
E5
5
Not existed
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст