Infiniti EX35. Manual — part 1105
MWI-98
< ECU DIAGNOSIS >
UNIFIED METER AND A/C AMP.
JCNWM0714GB
MWI
UNIFIED METER AND A/C AMP.
MWI-99
< ECU DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
JCNWM0715GB
MWI-100
< ECU DIAGNOSIS >
UNIFIED METER AND A/C AMP.
Fail-Safe
INFOID:0000000003140235
FAIL-SAFE
The unified meter and A/C amp. activates the fail-safe control if CAN communication with each unit is malfunc-
tioning.
JCNWM0716GB
MWI
UNIFIED METER AND A/C AMP.
MWI-101
< ECU DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
DTC Index
INFOID:0000000003140236
Function
Specifications
Speedometer
Reset to zero by suspending communication.
Tachometer
Fuel gauge
Water temperature gauge
Illumination control
When suspending communication, change to nighttime mode.
Information display
The display turns off by suspending communication.
Buzzer
The buzzer turns off by suspending communication.
Warning lamp/indicator
lamp
ABS warning lamp
The lamp turns on by suspending communication.
VDC OFF indicator lamp
SLIP indicator lamp
Brake warning lamp
CRUISE warning lamp
AWD warning lamp
Low tire pressure warning lamp
AFS OFF indicator lamp
The lamp blinking caused by communication malfunction
High beam indicator
The lamp turns off by suspending communication.
Turn signal indicator lamp
Light indicator lamp
Oil pressure warning lamp
Malfunction indicator lamp
A/T CHECK warning lamp
Key warning lamp
Lane departure warning lamp
LDP ON indicator lamp
Master warning lamp
Display contents of CON-
SULT-III
Time
Diagnostic item is detected when ...
Refer to
CAN COMM CIRCUIT
[U1000]
CRNT, 1 - 39
When unified meter and A/C amp. is not transmitting or receiving CAN
communication signal for 2 seconds or more.
CONTROL UNIT (CAN)
[U1010]
CRNT, 1 - 39
When detecting error during the initial diagnosis of CAN controller of
unified meter and A/C amp.
COMM ERROR 1
[B2201]
CRNT, 1 - 39
If a communication error is present in the communication line between
unified meter and A/C amp. and combination meter for 2 seconds or
more.
COMM ERROR 2
[B2202]
CRNT, 1 - 39
If a communication error is present in the communication line between
unified meter and A/C amp. and combination meter for 2 seconds or
more.
VEHICLE SPEED
[B2205]
CRNT, 1 - 39
The abnormal vehicle speed signal is input from ABS actuator and elec-
tric unit (control unit) for 2 seconds or more.
ENGINE SPEED
[B2267]
CRNT, 1 - 39
If ECM continuously transmits abnormal engine speed signals for 2 sec-
onds or more.
WATER TEMP
[B2268]
CRNT, 1 - 39
If ECM continuously transmits abnormal engine coolant temperature
signals for 60 seconds or more.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст