Infiniti EX35. Manual — part 405
CCS
U0104 LDP) ICC CAM CAN CIR2
CCS-155
< COMPONENT DIAGNOSIS >
[LDW & LDP]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
U0104 LDP) ICC CAM CAN CIR2
DTC Logic
INFOID:0000000003514609
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
DTC ERASE
Erase the DTC memory of ABS actuator and electric unit (control unit) with CONSULT-III.
>> GO TO 2.
2.
DTC CONFIRMATION
1.
Turn ignition switch ON and wait for 2 seconds or more.
2.
Perform the self-diagnosis of ABS actuator and electric unit (control unit) with CONSULT-III.
Is the DTC “U0104” detected?
YES
>> Refer to
CCS-155, "Diagnosis Procedure"
NO
>> Refer to
GI-38, "Intermittent Incident"
.
Diagnosis Procedure
INFOID:0000000003514610
1.
PERFORM SELF-DIAGNOSIS OF ICC SENSOR INTEGRATED UNIT
Perform ICC sensor integrated unit self-diagnosis with CONSULT-III.
Is any DTC detected?
YES
>> GO TO 2.
NO
>> GO TO 4.
2.
ICC SENSOR INTEGRATED UNIT TROUBLE DIAGNOSIS
Perform trouble diagnosis of ICC sensor integrated unit. Refer to
>> GO TO 3.
3.
ERASE DTC
Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT-III.
Is the DTC “U0104” erased?
YES
>> INSPECTION END
NO
>> Replace ABS actuator and electric unit (control unit).
4.
PROVISIONAL REPLACEMENT OF ICC SENSOR INTEGRATED UNIT
Remove ICC sensor integrated unit. Install a normal ICC sensor integrated unit.
>> GO TO 5.
5.
ERASE DTC
Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT-III.
Is the DTC “U0104” erased?
YES
>> Replace ICC sensor integrated unit.
NO
>> Replace ABS actuator and electric unit (control unit).
DTC
No.
Trouble diagnosis
name
DTC detecting condition
DTC erase conditions
Possible cause
U0104
LDP) ICC CAM CAN
CIR1
ABS actuator and electric unit (control
unit) detected an error of CAN com-
munication signal that was received
from ICC sensor integrated unit.
Erase DTC with CON-
SULT-III
• ICC sensor integrated unit
• ABS actuator and electric
unit (control unit)
CCS-156
< COMPONENT DIAGNOSIS >
[LDW & LDP]
U0405 LDP) ICC CAM CAN CIR1
U0405 LDP) ICC CAM CAN CIR1
DTC Logic
INFOID:0000000003514611
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
DTC ERASE
Erase the DTC memory of ABS actuator and electric unit (control unit) with CONSULT-III.
>> GO TO 2.
2.
DTC CONFIRMATION
1.
Turn ignition switch ON and wait for 2 seconds or more.
2.
Perform the self-diagnosis of ABS actuator and electric unit (control unit) with CONSULT-III.
Is the DTC “U0405” detected?
YES
>> Refer to
CCS-156, "Diagnosis Procedure"
NO
>> Refer to
GI-38, "Intermittent Incident"
.
Diagnosis Procedure
INFOID:0000000003514612
1.
PERFORM SELF-DIAGNOSIS OF ICC SENSOR INTEGRATED UNIT
Perform ICC sensor integrated unit self-diagnosis with CONSULT-III.
Is any DTC detected?
YES
>> GO TO 2.
NO
>> GO TO 4.
2.
ICC SENSOR INTEGRATED UNIT TROUBLE DIAGNOSIS
Perform trouble diagnosis of ICC sensor integrated unit. Refer to
.
>> GO TO 3.
3.
ERASE DTC
Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT-III.
Is the DTC “U0405” erased?
YES
>> INSPECTION END
NO
>> Replace ABS actuator and electric unit (control unit).
4.
PROVISIONAL REPLACEMENT OF ICC SENSOR INTEGRATED UNIT
Remove ICC sensor integrated unit. Install a normal ICC sensor integrated unit.
>> GO TO 5.
5.
ERASE DTC
Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT-III.
Is the DTC “U0405” erased?
YES
>> Replace ICC sensor integrated unit.
NO
>> Replace ABS actuator and electric unit (control unit).
DTC
No.
Trouble diagnosis
name
DTC detecting condition
DTC erase conditions
Possible cause
U0405
LDP) ICC CAM CAN
CIR1
ABS actuator and electric unit (control
unit) detected an error of CAN com-
munication signal that was received
from ICC sensor integrated unit.
Erase DTC with CON-
SULT-III
• ICC sensor integrated unit
• ABS actuator and electric
unit (control unit)
CCS
U1500 LDP) CAM CAN CIR1
CCS-157
< COMPONENT DIAGNOSIS >
[LDW & LDP]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
U1500 LDP) CAM CAN CIR1
DTC Logic
INFOID:0000000003514613
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
DTC ERASE
Erase the DTC memory of ABS actuator and electric unit (control unit) with CONSULT-III.
>> GO TO 2.
2.
DTC CONFIRMATION
1.
Turn ignition switch ON and wait for 2 seconds or more.
2.
Perform the self-diagnosis of ABS actuator and electric unit (control unit) with CONSULT-III.
Is the DTC “U1500” detected?
YES
>> Refer to
CCS-157, "Diagnosis Procedure"
NO
>> Refer to
GI-38, "Intermittent Incident"
.
Diagnosis Procedure
INFOID:0000000003514614
1.
PERFORM SELF-DIAGNOSIS OF LANE CAMERA UNIT
Perform self-diagnosis of lane camera unit with CONSULT-III.
Is any DTC detected?
YES
>> GO TO 2.
NO
>> GO TO 4.
2.
LANE CAMERA UNIT TROUBLE DIAGNOSIS
Perform trouble diagnosis of the lane camera unit. Refer to
>> GO TO 3.
3.
ERASE DTC
Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT-III.
Is the DTC “U1500” erased?
YES
>> INSPECTION END
NO
>> Replace ABS actuator and electric unit (control unit).
4.
PROVISIONAL REPLACEMENT OF LANE CAMERA UNIT
Remove the lane camera unit. Install a normal lane camera unit.
>> GO TO 5.
5.
ERASE DTC
Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT-III.
Is the DTC “U1500” erased?
YES
>> Replace the lane camera unit.
NO
>> Replace ABS actuator and electric unit (control unit).
DTC
No.
Trouble diagnosis
name
DTC detecting condition
DTC erase conditions
Possible cause
U1500
LDP) CAM CAN CIR1
ABS actuator and electric unit (control
unit) detected an error of CAN com-
munication signal that was received
from the lane camera unit.
Erase DTC with CON-
SULT-III
• Lane camera unit
• ABS actuator and electric
unit (control unit)
CCS-158
< COMPONENT DIAGNOSIS >
[LDW & LDP]
U1501 LDP) CAM CAN CIR2
U1501 LDP) CAM CAN CIR2
DTC Logic
INFOID:0000000003514615
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
DTC ERASE
Erase the DTC memory of ABS actuator and electric unit (control unit) with CONSULT-III.
>> GO TO 2.
2.
DTC CONFIRMATION
1.
Turn ignition switch ON and wait for 2 seconds or more.
2.
Perform the self-diagnosis of ABS actuator and electric unit (control unit) with CONSULT-III.
Is the DTC “U1501” detected?
YES
>> Refer to
CCS-158, "Diagnosis Procedure"
NO
>> Refer to
GI-38, "Intermittent Incident"
.
Diagnosis Procedure
INFOID:0000000003514616
1.
PERFORM SELF-DIAGNOSIS OF LANE CAMERA UNIT
Perform self-diagnosis of lane camera unit with CONSULT-III.
Is any DTC detected?
YES
>> GO TO 2.
NO
>> GO TO 4.
2.
LANE CAMERA UNIT TROUBLE DIAGNOSIS
Perform trouble diagnosis of the lane camera unit. Refer to
>> GO TO 3.
3.
ERASE DTC
Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT-III.
Is the DTC “U1501” erased?
YES
>> INSPECTION END
NO
>> Replace ABS actuator and electric unit (control unit).
4.
PROVISIONAL REPLACEMENT OF LANE CAMERA UNIT
Remove lane camera unit. Install a normal lane camera unit.
>> GO TO 5.
5.
ERASE DTC
Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT-III.
Is the DTC “U1501” erased?
YES
>> Replace the lane camera unit.
NO
>> Replace ABS actuator and electric unit (control unit).
DTC
No.
Trouble diagnosis
name
DTC detecting condition
DTC erase conditions
Possible cause
U1501
LDP) CAM CAN CIR2
ABS actuator and electric unit (control
unit) detected an error of CAN com-
munication signal that was received
from the lane camera unit.
Erase DTC with CON-
SULT-III
• Lane camera unit
• ABS actuator and electric
unit (control unit)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст