Infiniti EX35. Manual — part 1356
SRC-50
< COMPONENT DIAGNOSIS >
B1065, B1070 ASSIST A/B MODULE
B1065, B1070 ASSIST A/B MODULE
Description
INFOID:0000000003591782
DTC B 1065, B1070 [OPEN] ASSIST A/B MODULE
For front passenger air bag module, crash is judged by main “G” sensor output signal and Safing algorithm in
front direction.
OPERATION
In the case of a frontal collision whose acceleration exceeds the specified level, the ignition materials are
ignited by electric ignition system. The system burns and introduces the chemical reaction of gas generating
materials to generate hot gases that flow into the air bag through a filter and expand the bag.
STRUCTURE
Front passenger air bag module mainly consists of air bag and inflator which inflates air bag.
INSTALLATION
Front passenger air bag module is installed on the instrument panel with fixed bolts.
DTC Logic
INFOID:0000000003591783
DTC DETECTION LOGIC
With CONSULT-III
DTC No. Index (“SELF-DIAG [CURRENT]”), (“SELF-DIAG [PAST]” or “TROUBLE DIAG RECORD”)
DTC CONFIRMATION PROCEDURE (WITH CONSULT-III)
1.
CHECK SELF-DIAG RESULT
1.
Turn ignition switch ON.
2.
Check the screen of CONSULT-III.
Is malfunctioning part detected?
YES
>> Refer to
NO
>> INSPECTION END
DTC CONFIRMATION PROCEDURE (WITHOUT CONSULT-III)
NOTE:
• SRS will not enter diagnosis mode if no malfunction is detected in user mode.
1.
CHECK AIR BAG WARNING LAMP
1.
Turn ignition switch ON.
2.
Check the air bag warning lamp status.
Is malfunctioning part detected?
YES
>> Refer to warning lamp flash code chart. Refer to
NO
>> INSPECTION END
Diagnosis Procedure
INFOID:0000000003591784
WITH CONSULT-III
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait at least 3
minutes. (To discharge backup capacitor.)
• Do not use unspecified tester or other measuring device.
DTC No.
Trouble diagnosis name
DTC detecting condition
Possible cause
B1065
B1070
ASSIST A/B MODULE
[OPEN]
Front passenger air bag module circuit
is open
• Disconnection of wiring harness and
open
• Internal breakdown in front passen-
ger air bag module
• Internal breakdown in air bag diag-
nosis sensor unit
B1065, B1070 ASSIST A/B MODULE
SRC-51
< COMPONENT DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
DIAGNOSTIC PROCEDURE
1.
CHECK HARNESS CONNECTOR
Check the connection of harness connector.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Replace harness connector.
2.
CHECK WIRING HARNESS
Check the wiring harness externals.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Replace wiring harness.
3.
CHECK FRONT PASSENGER AIR BAG MODULE
1.
Replace front passenger air bag module. Refer to
2.
Check “Self diagnostic result” with CONSULT-III.
3.
Perform DTC confirmation procedure. Refer to
.
Is DTC detected?
YES
>> GO TO 4.
NO
>> INSPECTION END
4.
CHECK AIR BAG DIAGNOSIS SENSOR UNIT
1.
Replace air bag diagnosis sensor unit. Refer to
2.
Check “Self diagnostic result” with CONSULT-III.
3.
Perform DTC confirmation procedure. Refer to
.
Is DTC detected?
YES
>> GO TO 1.
NO
>> INSPECTION END
SRC-52
< COMPONENT DIAGNOSIS >
B1066, B1071 ASSIST A/B MODULE
B1066, B1071 ASSIST A/B MODULE
Description
INFOID:0000000003591785
DTC B1066, B1071 [VB-SHORT] ASSIST A/B MODULE
For front passenger air bag module, crash is judged by main “G” sensor output signal and Safing algorithm in
front direction.
OPERATION
In the case of a frontal collision whose acceleration exceeds the specified level, the ignition materials are
ignited by electric ignition system. The system burns and introduces the chemical reaction of gas generating
materials to generate hot gases that flow into the air bag through a filter and expand the bag.
STRUCTURE
Front passenger air bag module mainly consists of air bag and inflator which inflates air bag.
INSTALLATION
Front passenger air bag module is installed on the instrument panel with fixed bolts.
DTC Logic
INFOID:0000000003591786
DTC DETECTION LOGIC
With CONSULT-III
DTC No. Index (“SELF-DIAG [CURRENT]”), (“SELF-DIAG [PAST]” or “TROUBLE DIAG RECORD”)
DTC CONFIRMATION PROCEDURE (WITH CONSULT-III)
1.
CHECK SELF-DIAG RESULT
1.
Turn ignition switch ON.
2.
Check the screen of CONSULT-III.
Is malfunctioning part detected?
YES
>> Refer to
NO
>> INSPECTION END
DTC CONFIRMATION PROCEDURE (WITHOUT CONSULT-III)
NOTE:
• SRS will not enter diagnosis mode if no malfunction is detected in user mode.
1.
CHECK AIR BAG WARNING LAMP
1.
Turn ignition switch ON.
2.
Check the air bag warning lamp status.
Is malfunctioning part detected?
YES
>> Refer to warning lamp flash code chart. Refer to
NO
>> INSPECTION END
Diagnosis Procedure
INFOID:0000000003591787
WITH CONSULT-III
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait at least 3
minutes. (To discharge backup capacitor.)
• Do not use unspecified tester or other measuring device.
DTC No.
Trouble diagnosis name
DTC detecting condition
Possible cause
B1066
B1071
ASSIST A/B MODULE
[VB-SHORT]
Front passenger air bag module circuit
is shorted to some power supply circuit
• Disconnection of wiring harness and
short
• Internal breakdown in front passen-
ger air bag module
• Internal breakdown in air bag diag-
nosis sensor unit
B1066, B1071 ASSIST A/B MODULE
SRC-53
< COMPONENT DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
DIAGNOSTIC PROCEDURE
1.
CHECK HARNESS CONNECTOR
Check the connection of harness connector.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Replace harness connector.
2.
CHECK WIRING HARNESS
Check the wiring harness externals.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Replace wiring harness.
3.
CHECK FRONT PASSENGER AIR BAG MODULE
1.
Replace front passenger air bag module. Refer to
.
2.
Check “Self diagnostic result” with CONSULT-III.
3.
Perform DTC confirmation procedure. Refer to
.
Is DTC detected?
YES
>> GO TO 4.
NO
>> INSPECTION END
4.
CHECK AIR BAG DIAGNOSIS SENSOR UNIT
1.
Replace air bag diagnosis sensor unit. Refer to
2.
Check “Self diagnostic result” with CONSULT-III.
3.
Perform DTC confirmation procedure. Refer to
.
Is DTC detected?
YES
>> GO TO 1.
NO
>> INSPECTION END
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст