Infiniti EX35. Manual — part 1367
SRC-94
< COMPONENT DIAGNOSIS >
B1132 SIDE MODULE RH
B1132 SIDE MODULE RH
Description
INFOID:0000000003595961
DTC B1132 [SHORT] SIDE MODULE RH
For front RH side air bag module, crash is judged by main “G” sensor output signal (left side:LH satellite sen-
sor, right side:RH satellite sensor) and Safing algorithm (in air bag diagnosis sensor unit).
OPERATION
In the case of a collision whose acceleration exceeds the specified level, the ignition materials are ignited by
electric ignition system. The system burns and introduces the chemical reaction of gas generating materials to
generate hot gases that flow into the air bag through a filter and expand the bag.
STRUCTURE
Front RH side air bag module mainly consists of air bag and inflator which inflates air bag.
INSTALLATION
Front RH side air bag module is installed on the side of front seatback with fixed nuts.
DTC Logic
INFOID:0000000003595962
DTC DETECTION LOGIC
With CONSULT-III
DTC No. Index (“SELF-DIAG [CURRENT]”), (“SELF-DIAG [PAST]” or “TROUBLE DIAG RECORD”)
DTC CONFIRMATION PROCEDURE (WITH CONSULT-III)
1.
CHECK SELF-DIAG RESULT
1.
Turn ignition switch ON.
2.
Check the screen of CONSULT-III.
Is malfunctioning part detected?
YES
>> Refer to
NO
>> INSPECTION END
DTC CONFIRMATION PROCEDURE (WITHOUT CONSULT-III)
NOTE:
• SRS will not enter diagnosis mode if no malfunction is detected in user mode.
1.
CHECK AIR BAG WARNING LAMP
1.
Turn ignition switch ON.
2.
Check the air bag warning lamp status.
Is malfunctioning part detected?
YES
>> Refer to warning lamp flash code chart. Refer to
NO
>> INSPECTION END
Diagnosis Procedure
INFOID:0000000003595963
WITH CONSULT-III
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait at least 3
minutes. (To discharge backup capacitor.)
• Do not use unspecified tester or other measuring device.
DTC No.
Trouble diagnosis name
DTC detecting condition
Possible cause
B1132
SIDE MODULE RH
[SHORT]
Front RH side air bag module circuit are
shorted to each other
• Disconnection of wiring harness and
short
• Internal breakdown in front RH side
air bag module
• Internal breakdown in air bag diag-
nosis sensor unit
B1132 SIDE MODULE RH
SRC-95
< COMPONENT DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
DIAGNOSTIC PROCEDURE
1.
CHECK HARNESS CONNECTOR
Check the connection of harness connector.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Replace harness connector.
2.
CHECK WIRING HARNESS
Check the wiring harness externals.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Replace wiring harness.
3.
CHECK FRONT SIDE AIR BAG MODULE
1.
Replace front RH side air bag module. Refer to
2.
Check “Self diagnosis result” with CONSULT-III.
3.
Perform DTC confirmation procedure. Refer to
.
Is DTC detected?
YES
>> GO TO 4.
NO
>> INSPECTION END
4.
CHECK AIR BAG DIAGNOSIS SENSOR UNIT
1.
Replace air bag diagnosis sensor unit. Refer to
2.
Check “Self diagnosis result” with CONSULT-III.
3.
Perform DTC confirmation procedure. Refer to
.
Is DTC detected?
YES
>> GO TO 1.
NO
>> INSPECTION END
SRC-96
< COMPONENT DIAGNOSIS >
B1134 SIDE MODULE LH
B1134 SIDE MODULE LH
Description
INFOID:0000000003595964
DTC B1134 [OPEN] SIDE MODULE LH
For front LH side air bag module, crash is judged by main “G” sensor output signal (left side:LH satellite sen-
sor, right side:RH satellite sensor) and Safing algorithm (in air bag diagnosis sensor unit).
OPERATION
In the case of a collision whose acceleration exceeds the specified level, the ignition materials are ignited by
electric ignition system. The system burns and introduces the chemical reaction of gas generating materials to
generate hot gases that flow into the air bag through a filter and expand the bag.
STRUCTURE
Front LH side air bag module mainly consists of air bag and inflator which inflates air bag.
INSTALLATION
Front LH side air bag module is installed on the side of front seatback with fixed nuts.
DTC Logic
INFOID:0000000003595965
DTC DETECTION LOGIC
With CONSULT-III
DTC No. Index (“SELF-DIAG [CURRENT]”), (“SELF-DIAG [PAST]” or “TROUBLE DIAG RECORD”)
DTC CONFIRMATION PROCEDURE (WITH CONSULT-III)
1.
CHECK SELF-DIAG RESULT
1.
Turn ignition switch ON.
2.
Check the screen of CONSULT-III.
Is malfunctioning part detected?
YES
>> Refer to
NO
>> INSPECTION END
DTC CONFIRMATION PROCEDURE (WITHOUT CONSULT-III)
NOTE:
• SRS will not enter diagnosis mode if no malfunction is detected in user mode.
1.
CHECK AIR BAG WARNING LAMP
1.
Turn ignition switch ON.
2.
Check the air bag warning lamp status.
Is malfunctioning part detected?
YES
>> Refer to warning lamp flash code chart. Refer to
NO
>> INSPECTION END
Diagnosis Procedure
INFOID:0000000003595966
WITH CONSULT-III
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait at least 3
minutes. (To discharge backup capacitor.)
• Do not use unspecified tester or other measuring device.
DTC No.
Trouble diagnosis name
DTC detecting condition
Possible cause
B1134
SIDE MODULE LH
[OPEN]
Front LH side air bag module circuit is
open
• Disconnection of wiring harness and
open
• Internal breakdown in front LH side
air bag module
• Internal breakdown in air bag diag-
nosis sensor unit
B1134 SIDE MODULE LH
SRC-97
< COMPONENT DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
DIAGNOSTIC PROCEDURE
1.
CHECK HARNESS CONNECTOR
Check the connection of harness connector.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Replace harness connector.
2.
CHECK WIRING HARNESS
Check the wiring harness externals.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Replace wiring harness.
3.
CHECK FRONT SIDE AIR BAG MODULE
1.
Replace front LH side air bag module. Refer to
2.
Check “Self diagnosis result” with CONSULT-III.
3.
Perform DTC confirmation procedure. Refer to
.
Is DTC detected?
YES
>> GO TO 4.
NO
>> INSPECTION END
4.
CHECK AIR BAG DIAGNOSIS SENSOR UNIT
1.
Replace air bag diagnosis sensor unit. Refer to
2.
Check “Self diagnosis result” with CONSULT-III.
3.
Perform DTC confirmation procedure. Refer to
.
Is DTC detected?
YES
>> GO TO 1.
NO
>> INSPECTION END
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст