Infiniti EX35. Manual — part 52
ADP-202
< SYMPTOM DIAGNOSIS >
MANUAL FUNCTION OR MEMORY FUNCTION DOES NOT OPERATE
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunction parts.
3.
CHECK TILT MOTOR
Check tilt motor.
Refer to
ADP-116, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunction parts.
4.
CHECK TILT SENSOR
Check steering tilt sensor.
Refer to
ADP-100, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunction parts.
5.
CONFIRM THE OPERATION
Check the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-38, "Intermittent Incident"
.
NO
>> GO TO 1.
STEERING TELESCOPIC
STEERING TELESCOPIC : Diagnosis Procedure
INFOID:0000000003134795
1.
CHECK STEERING TELESCOPIC MECHANISM
Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunction parts.
2.
CHECK TELESCOPIC SWITCH
Check telescopic switch.
Refer to
ADP-72, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunction parts.
3.
CHECK TELESCOPIC MOTOR
Check telescopic motor.
Refer to
ADP-118, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunction parts.
4.
CHECK TELESCOPIC SENSOR
Check steering telescopic sensor.
Refer to
ADP-102, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunction parts.
5.
CONFIRM THE OPERATION
MANUAL FUNCTION OR MEMORY FUNCTION DOES NOT OPERATE
ADP-203
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
Check the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-38, "Intermittent Incident"
.
NO
>> GO TO 1.
DOOR MIRROR
DOOR MIRROR : Diagnosis Procedure
INFOID:0000000003134796
1.
CHECK DOOR MIRROR MECHANISM
Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunction parts.
2.
CHECK MIRROR SWITCH
Check mirror switch.
Refer to
ADP-79, "MIRROR SWITCH : Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunction parts.
3.
CHECK MIRROR MOTOR
Check mirror motor.
Refer to
ADP-120, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunction parts.
4.
CHECK MIRROR SENSOR
Check mirror sensor.
Refer to
ADP-104, "DRIVER SIDE : Component Function Check"
. (Driver side)
ADP-105, "PASSENGER SIDE : Component Function Check"
. (Passenger side)
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunction parts.
5.
CONFIRM THE OPERATION
Check the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-38, "Intermittent Incident"
.
NO
>> GO TO 1.
ADP-204
< SYMPTOM DIAGNOSIS >
SEAT SYNCHRONIZATION FUNCTION DOES NOT OPERATE
SEAT SYNCHRONIZATION FUNCTION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000003134797
1.
CHECK SYSTEM SETTING
Check system setting.
Refer to
ADP-11, "SYSTEM SETTING : Special Repair Requirement"
Is the inspection result normal?
YES
>> Synchronization function is normal.
NO
>> GO TO 2.
2.
CONFIRM THE OPERATION
Check the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-38, "Intermittent Incident"
.
NO
>> GO TO 1.
ENTRY/EXIT ASSIST FUNCTION DOES NOT OPERATE
ADP-205
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
ENTRY/EXIT ASSIST FUNCTION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000003134798
1.
CHECK SYSTEM SETTING
1.
Check system setting.
Refer to
ADP-11, "SYSTEM SETTING : Special Repair Requirement"
.
2.
Check the operation.
Is the inspection result normal?
YES
>> Entry/Exit function is OK.
NO
>> GO TO 2.
2.
PERFORM SYSTEM INITIALIZATION
1.
Perform system initialization.
Refer to
ADP-9, "SYSTEM INITIALIZATION : Special Repair Requirement"
2.
Check the operation.
Is the inspection result normal?
YES
>> Entry/Exit function is OK.
NO
>> GO TO 3.
3.
CHECK FRONT DOOR SWITCH (DRIVER SIDE)
Check front door switch (driver side).
Refer to
ADP-86, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunction parts.
4.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-38, "Intermittent Incident"
.
NO
>> GO TO 1.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст