Infiniti G35 (V35) Sedan. Manual — part 1480
DIAGNOSIS SYSTEM (IPDM E/R)
WW-13
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
DIAGNOSIS SYSTEM (IPDM E/R)
CONSULT-III Function
INFOID:0000000000962637
WW-14
< COMPONENT DIAGNOSIS >
WIPER AND WASHER FUSE
COMPONENT DIAGNOSIS
WIPER AND WASHER FUSE
Description
INFOID:0000000000962638
Fuse list
Diagnosis Procedure
INFOID:0000000000962639
1.
CHECK FUSES
Check that the following fuses are not fusing.
Is the fuse fusing?
YES
>> Replace the fuse with a new one after repairing the applicable circuit.
NO
>> The fuse is normal.
Unit
Location
Fuse No.
Capacity
Front wiper motor
IPDM E/R
#60
30 A
Washer pump
IPDM E/R
#47
10 A
Unit
Location
Fuse No.
Capacity
Front wiper mo-
tor
IPDM E/R
#60
30 A
Washer pump
IPDM E/R
#47
10 A
FRONT WIPER MOTOR LO CIRCUIT
WW-15
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
FRONT WIPER MOTOR LO CIRCUIT
Component Function Check
INFOID:0000000000962640
1.
CHECK FRONT WIPER LO OPERATION
IPDM E/R AUTO ACTIVE TEST
1.
Start IPDM E/R auto active test. Refer to
PCS-10, "Diagnosis Description"
2.
Check that the front wiper operates at the LO operation.
CONSULT-III ACTIVE TEST
1.
Select "FRONT WIPER" of IPDM E/R active test item.
2.
With operating the test item, check that front wiper LO operation and OFF.
Does the front wiper operate?
YES
>> Front wiper motor LO circuit is normal.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000000962641
1.
CHECK FRONT WIPER MOTOR (LO) OUTPUT VOLTAGE
CONSULT-III ACTIVE TEST
1.
Turn the ignition switch OFF.
2.
Disconnect front wiper motor connector.
3.
Turn the ignition switch ON.
4.
Select "FRONT WIPER" of IPDM E/R active test item.
5.
With operating the test item, check voltage between IPDM E/R harness connector and ground.
Is the measurement normal?
YES
>> GO TO 2.
NO
>> Replace IPDM E/R.
2.
CHECK FRONT WIPER MOTOR (LO) OPEN CIRCUIT
1.
Turn the ignition switch OFF.
2.
Disconnect IPDM E/R connector.
3.
Check continuity between IPDM E/R harness connector and front wiper motor harness connector.
Does continuity exist?
YES
>> GO TO 3.
NO
>> Repair the harnesses or connectors.
3.
CHECK FRONT WIPER MOTOR (LO) SHORT CIRCUIT
Check continuity between IPDM E/R harness connector and ground.
LO
: Front wiper LO operation
OFF
: Stop the front wiper.
Terminals
Test item
Voltage
(Approx.)
(+)
(-)
IPDM E/R
Ground
FRONT WIP-
ER
Connector
Terminal
E5
4
LO
Battery
voltage
OFF
0 V
IPDM E/R
Front wiper motor
Continuity
Connector
Terminal
Connector
Terminal
E5
4
E42
1
Existed
WW-16
< COMPONENT DIAGNOSIS >
FRONT WIPER MOTOR LO CIRCUIT
Does continuity exist?
YES
>> Repair the harnesses or connectors.
NO
>> Replace front wiper motor.
IPDM E/R
Ground
Continuity
Connector
Terminal
E5
4
Not existed
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст