Infiniti G35 (V35) Sedan. Manual — part 1134
SE-3
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
Diagnosis Procedure . . . . . . . . . . . ...
STEERING POSITION FUNCTION DOES
NOT OPERATE . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . ...
TILT FUNCTION DOES NOT OPERATE . . ...
Diagnosis Procedure . . . . . . . . . . . ...
TELESCOPIC FUNCTION DOES NOT OPER-
ATE . . . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
TILT FUNCTION IS OPERATING ONLY IN
ONE WAY . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
TELESCOPIC FUNCTION IS OPERATING
ONLY IN ONE SIDE . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
SQUEAK AND RATTLE TROUBLE DIAG-
NOSES . . . . . . . . . . . . . . . ...
Work Flow . . . . . . . . . . . . . . . ...
Inspection Procedure . . . . . . . . . . . ..
Diagnostic Worksheet . . . . . . . . . . . .
PRECAUTION . . . . . . . . . . . ..
PRECAUTIONS . . . . . . . . . . . . ..
Service Notice . . . . . . . . . . . . . . .
Precaution for Work . . . . . . . . . . . .
PREPARATION . . . . . . . . . . ...
PREPARATION . . . . . . . . . . . . .
Special Service Tool . . . . . . . . . . . .
Commercial Service Tool . . . . . . . . . .
ON-VEHICLE MAINTENANCE . . . . .
PRE-INSPECTION FOR DIAGNOSTIC . . .
Basic Inspection . . . . . . . . . . . . . ..
ON-VEHICLE REPAIR . . . . . . . . .
FRONT SEAT . . . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
Disassembly and Assembly . . . . . . . . . .
REAR SEAT . . . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . ...
Removal and Installation . . . . . . . . . ...
Disassembly and Assembly . . . . . . . . ...
AUTOMATIC DRIVE POSITIONER CON-
TROL UNIT . . . . . . . . . . . . . ..
Removal and Installation . . . . . . . . . ...
SEAT MEMORY SWITCH . . . . . . . ...
Removal and Installation . . . . . . . . . ...
POWER SEAT SWITCH . . . . . . . . .
Removal and Installation . . . . . . . . . ...
SIDE SUPPORT SWITCH . . . . . . . ...
Removal and Installation . . . . . . . . . ...
LUMBAR SUPPORT SWITCH . . . . . .
Removal and Installation . . . . . . . . . ...
TILT&TELESCOPIC SWITCH . . . . . .
SE-4
< BASIC INSPECTION >
DIAGNOSIS AND REPAIR WORKFLOW
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
INFOID:0000000000960459
DETAILED FLOW
1.
OBTAIN INFORMATION ABOUT SYMPTOM
Interview the customer to obtain the malfunction information (conditions and environment when the malfunc-
tion occurred) as much as possible when the customer brings the vehicle in.
>> GO TO 2.
2.
REPRODUCE THE MALFUNCTION INFORMATION
Check the malfunction on the vehicle that the customer describes.
Inspect the relation of the symptoms and the condition when the symptoms occur.
>> GO TO 3.
3.
PERFORM “BASIC INSPECTION”
Perform the basic inspection.Refer to
>> GO TO 4.
4.
IDENTIFY THE MALFUNCTIONING SYSTEM WITH “SYMPTOM DIAGNOSIS”
Use “Symptom diagnosis” from the symptom inspection result in step 2. Then identify where to start perform-
ing the diagnosis based on possible causes and symptoms.
>> GO TO 5.
5.
IDENTIFY MALFUNCTIONING PARTS WITH “COMPONENT DIAGNOSIS”
Perform the diagnosis with “Component diagnosis” of the applicable system.
>> GO TO 6.
6.
REPAIR OR REPLACE THE MALFUNCTIONING PARTS
Repair or replace the specified malfunctioning parts.
>> GO TO 7.
7.
FINAL CHECK
Is the malfunctioning part repaired or replaced?
(Check that malfunctions are not reproduced when obtaining the malfunction information from the customer,
referring to the symptom inspection result in step 2.)
YES or NO
YES
>> Trouble diagnosis is completed.
NO
>> GO TO 3.
POWER SEAT
SE-5
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
FUNCTION DIAGNOSIS
POWER SEAT
System Description
INFOID:0000000000960460
BCM can operate regardless of the ignition switch position, because battery power is supplied at all times to
power seat switch and side support unit.
SLIDING OPERATION
While operating the sliding switch located in power seat switch, sliding motor operates and makes possible the
seat front and back position adjustment.
RECLINING OPERATION
While operating the reclining switch located in power seat switch, reclining motor operates and makes possi-
ble the seat back forward and backward position adjustment.
LIFTING OPERATION
While operating the lifting switch located in power seat switch, lifting motor operates and makes possible the
seat cushion up and down position adjustment.
SIDE SUPPORT OPERATION
• While operating the side support switch, the pump located inside side support unit operates and adjust the
air pressure in seat cushion and seatback side support.
• It is possible to soften the side support, by allowing some air to escape, by deflating the solenoid located
inside side support.
• It is possible to adjust seat cushion and seatback differently while inflating or deflating solenoid located in
side support unit.
Component Parts Location
INFOID:0000000000960461
Component Description
INFOID:0000000000960462
JMJIA0190ZZ
1.
Sliding switch and lifting switch B414 2.
Reclining switch B414
3.
Side support switch (seat back) B414
4.
Side support switch (seat cushion)
B414
5.
Side support (seat cushion)
6.
Reclining motor B415
7.
Side support (seat back)
8.
Side support unit B420
9.
Lifting motor (rear) B418
10. Sliding motor B416
11.
Lifting motor (front) B417
A.
View with seat cushion pad and seat
back pad are removed.
B.
View with back side of seat cushion.
Item
Function
BCM
Supplies at all times the power received from battery to power seat switch and side support unit.
Power seat switch
Built-in reclining switch, sliding switch and lifting switch, controls the power supplied to each motor.
SE-6
< FUNCTION DIAGNOSIS >
POWER SEAT
Reclining motor
With the power supplied to power seat switch, operates the forward and backward movement of
seatback.
Sliding motor
With the power supplied to power seat switch, operates the forward and backward slide of seat.
Lifting motor (front/rear)
With the power supplied to power seat switch, operates the up and down movement of seat cush-
ion.
Side support switch
With a built-in cushion side and seat back side, controls the power supplied to pump and to each
solenoid.
Side support unit
Built-in pump, pump relay and solenoid, operates when pressing ON/OFF on side support switch.
Item
Function
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст