Infiniti G35 (V35) Sedan. Manual — part 795
INL-8
< FUNCTION DIAGNOSIS >
INTERIOR ROOM LAMP CONTROL SYSTEM
Component Description
INFOID:0000000000962568
1.
Key cylinder switch
2.
Request switch
3.
Step lamp
4.
Door switch
5.
Personal lamp
6.
Central door lock switch
7.
Map lamp
8.
Remote keyless entry receiver
9.
BCM
10. Trunk room lamp switch
11. Trunk room lamp
A.
Behind glove box
B.
Dash side finisher (Passenger side)
C.
Trunk lid lock assembly
D.
Trunk room upward
JPLIA0038ZZ
Part
Description
BCM
• Activates the interior room lamp timer depending on the vehicle condition to turn the
interior room lamp ON/OFF.
• Turns the trunk room lamp ON /OFF according to the trunk room lamp switch status.
• Turns the step lamp ON /OFF according to any door switch status.
INTERIOR ROOM LAMP BATTERY SAVER SYSTEM
INL-9
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
INTERIOR ROOM LAMP BATTERY SAVER SYSTEM
System Diagram
INFOID:0000000000962569
System Description
INFOID:0000000000962570
OUTLINE
• Interior room lamp battery saver is controlled by BCM.
• BCM turns applicable lamps OFF depending on the vehicle condition. This function prevents the battery
from over-discharging if the driver neglect turning OFF the any lamps.
Applicable lamps
• Map lamp
• Personal lamp
• Step lamp
• Trunk room lamp
• Vanity mirror lamp
INTERIOR ROOM LAMP BATTERY SAVER FANCTION
• When the ignition switch is turned OFF, BCM operates the timer for a period of time to cut the interior room
lamp power supply.
• BCM restart the timer when any of the following signals changes while operating the timer.
- Ignition switch status
- Door switch signal (ALL)
- Door lock/unlock signal (Remote keyless entry receiver, each request switch, key cylinder lock/unlock
switch, central door lock/unlock switch)
- Trunk loom lamp switch signal
- Key switch signal (Key slot)
• BCM provides the interior room lamp power supply continuously when the ignition switch position is other
than OFF.
NOTE:
Each function of interior room lamp battery saver can be set by CONSULT-III Refer to
SAVER : CONSULT-III Function (BCM - BATTERY SAVER)"
Component Parts Location
INFOID:0000000000962571
JPLIA0091GB
INL-10
< FUNCTION DIAGNOSIS >
INTERIOR ROOM LAMP BATTERY SAVER SYSTEM
Component Description
INFOID:0000000000962572
1.
Key cylinder switch
2.
Request switch
3.
Step lamp
4.
Door switch
5.
Personal lamp
6.
Central door lock switch
7.
Vanity mirror lamp
8.
Map lamp
9.
Remote keyless entry receiver
10. BCM
11.
Trunk room lamp switch
12.
Trunk room lamp
A.
Behind glove box
B.
Dash side finisher (Passenger side)
C.
Trunk lid lock assembly
D.
Trunk room upward
JPLIA0039ZZ
Part
Description
BCM
Operates the interior room lamp battery saver depending on the vehicle condition to
cut the interior room lamp power supply.
ILLUMINATION CONTROL SYSTEM
INL-11
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
ILLUMINATION CONTROL SYSTEM
System Diagram
INFOID:0000000000962573
System Description
INFOID:0000000000962574
OUTLINE
Each illumination lamp is controlled by each function of BCM, IPDM E/R and combination meter.
Control by BCM
• Combination switch reading function
• Headlamp control function
Control by IPDM E/R
• Relay control function
Control by combination meter
• Meter illumination control function (Refer to
MWI-24, "METER ILLUMINATION CONTROL : System Dia-
.)
ILLUMINATION CONTROL
• BCM detects the combination switch condition by the combination switch reading function.
• BCM transmits position light request signal to IPDM E/R and combination meter (through the unified meter
and A/C amp.) according to tail lamp ON condition.
Tail lamp ON condition
- Lighting switch 1ST
- Lighting switch 2ND
- Lighting switch AUTO, and the auto light function ON judgment (With auto light system)
• IPDM E/R turns the integrated tail lamp relay ON according to position light request signal. It provides the
power supply to each illumination lamp.
• Combination meter enters in the nighttime mode according to position light request signal. Under the night-
time mode the combination meter controls the illuminance by controlling the each illumination lamp (ground
side).
Component Parts Location
INFOID:0000000000962575
JPLIA0092GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст