Infiniti G35 (V35) Sedan. Manual — part 646
EXL-26
< FUNCTION DIAGNOSIS >
[XENON TYPE]
TURN SIGNAL AND HAZARD WARNING LAMP SYSTEM
Component Description
INFOID:0000000000962419
1.
Front turn signal lamp
2.
Combination switch
3.
Rear turn signal lamp
4.
Hazard warning switch
5.
BCM
6.
Unified meter and A/C amp.
7.
Turn signal indicator lamp
A.
Dash side lower (Passenger side)
B.
Behind cluster lid C
C.
On the combination meter
JPLIA0037ZZ
Part
Description
BCM
• Judges each switch condition by the combination switch reading function.
• Judges the blinks of the turn signal lamp and the hazard warning lamp from each
switch status. The applicable turn signal lamp blinks.
Requests the turn signal indicator lamp blink to the combination meter (with CAN
communication).
Combination switch
(Lighting & turn signal switch)
Refer to
.
Hazard switch
(Multifunction switch)
Refer to
Combination meter
(Turn signal indicator lamp & buzzer)
Blinks the turn signal indicator lamp and outputs the turn signal operating sound with
integrated buzzer according to the request from BCM [with CAN communication
(through unified meter and A/C amp.)].
PARKING, LICENSE PLATE AND TAIL LAMPS SYSTEM
EXL-27
< FUNCTION DIAGNOSIS >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
PARKING, LICENSE PLATE AND TAIL LAMPS SYSTEM
System Diagram
INFOID:0000000000962420
System Description
INFOID:0000000000962421
OUTLINE
Parking, license plate, side marker and tail lamps are controlled by combination switch reading function and
headlamp control function of BCM, and relay control function of IPDM E/R.
PARKING, LICENSE PLATE, SIDE MARKER AND TAIL LAMPS OPERATION
• BCM detects the combination switch condition by the combination switch reading function.
• BCM transmits the position light request signal to IPDM E/R with CAN communication according to the ON/
OFF condition of the parking, license plate, side marker and tail lamps.
Parking, license plate, side marker and tail lamps ON condition
- Lighting switch 1ST
- Lighting switch 2ND
- Lighting switch AUTO, and the auto light function ON judgment (with auto light system)
• IPDM E/R turns the integrated tail lamp relay ON and turns the parking lamp, the license plate, side marker
and tail lamps ON according to the position light request signal.
Component Parts Location
INFOID:0000000000962422
JPLIA0002GB
EXL-28
< FUNCTION DIAGNOSIS >
[XENON TYPE]
PARKING, LICENSE PLATE AND TAIL LAMPS SYSTEM
Component Description
INFOID:0000000000962423
1.
Parking lamp (used with the side
marker lamp)
2.
Combination switch
3.
Tail lamp and side marker lamp
4.
License plate lamp
5.
BCM
6.
IPDM E/R
A.
Dash side lower (Passenger side)
B.
Engine room dash panel (RH)
JPLIA0033ZZ
Part
Description
BCM
• Judges each switch condition by the combination switch reading function.
• Judges the ON/OFF status of the clearance, license plate, side marker and tail
lamps according to the vehicle condition. Requests the tail lamp relay ON to IPDM
E/R (with CAN communication).
IPDM E/R
Controls the integrated relay and supplies voltage to the load according to the request
from BCM (with CAN communication).
Combination switch
(Lighting & turn signal switch)
Refer to
.
EXTERIOR LAMP BATTERY SAVER SYSTEM
EXL-29
< FUNCTION DIAGNOSIS >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
EXTERIOR LAMP BATTERY SAVER SYSTEM
System Diagram
INFOID:0000000000962424
System Description
INFOID:0000000000962425
OUTLINE
• Exterior lamp battery saver system is controlled by each function of BCM and IPDM E/R.
Control by BCM
- Combination switch reading function
- Headlamp control function
- Exterior lamp battery saver function
Control by IPDM E/R
- Relay control function
• BCM turns the exterior lamp* OFF after a period of time to prevent the battery from over-discharge when the
ignition switch is turned OFF with the exterior lamp ON.
*: Headlamp (LO/HI), parking lamp, tail lamp, side marker lamp, license plate lamp and front fog lamp
NOTE:
When the lighting switch is turned AUTO, the exterior lamp battery saver switches to the auto light system.
Refer to
EXTERIOR LAMP BATTERY SAVER ACTIVATION
BCM activates the timer and turns the exterior lamp OFF 5 minutes after the ignition switch is turned from ON
→
OFF with the exterior lamps ON.
NOTE:
• Headlamp control function turns the exterior lamps ON normally when the ignition switch is turned ACC or
the engine started (both before and after the exterior lamp battery saver is turned OFF).
• The timer starts at the time that the lighting switch is turned from OFF
→
1ST or 2ND with the exterior lamp
OFF.
Component Parts Location
INFOID:0000000000962426
JPLIA0007GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст