Infiniti G35 (V35) Sedan. Manual — part 86
AV-116
< ON-VEHICLE REPAIR >
[BASE AUDIO WITHOUT NAVIGATION]
ANTENNA AMP.
ANTENNA AMP.
Exploded View
INFOID:0000000000964607
Removal and Installation
INFOID:0000000000964608
REMOVAL
1.
Remove rear pillar finisher LH. Refer to
.
2.
Remove antenna amp. from rear pillar LH.
INSTALLATION
Installation is the reverse order of removal.
JSNIA0123ZZ
1.
AM-FM main connector
2.
Antenna amp.
AV
SATELLITE RADIO TUNER
AV-117
< ON-VEHICLE REPAIR >
[BASE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
N
A
O
P
SATELLITE RADIO TUNER
Exploded View
INFOID:0000000000964609
Removal and Installation
INFOID:0000000000964610
REMOVAL
1.
Remove trunk front finisher. Refer to
.
2.
Remove rear parcel shelf finisher. Refer to
3.
Remove screw (A) from inside the cabin, and remove TEL
adapter unit and TEL antenna as a single unit from trunk room
side.
4.
Remove bracket screws and remove TEL adapter unit and sat-
ellite radio tuner.
INSTALLATION
Installation is the reverse order of removal.
1.
TEL antenna
2.
Satellite radio tuner
3.
Bracket (front)
4.
TEL adapter unit
5.
Bracket (rear)
JSNIA0156ZZ
JSNIA0157ZZ
AV-118
< ON-VEHICLE REPAIR >
[BASE AUDIO WITHOUT NAVIGATION]
SATELLITE RADIO ANTENNA
SATELLITE RADIO ANTENNA
Exploded View
INFOID:0000000000964611
Removal and Installation
INFOID:0000000000964612
REMOVAL
1.
Remove head lining assembly (rear) to secure work space between vehicle and headlining. Refer to
2.
Remove nuts, and then remove satellite radio antenna from roof panel.
INSTALLATION
Installation is the reverse order of removal.
CAUTION:
Be careful about tightening torque. Antenna sensitivity becomes poor, and when it is excessive, roof
panel may be deformed, when roof antenna mounting nut tightening torque is loose.
JSNIA0124ZZ
1.
Satellite radio antenna
Roof antenna mounting nut
: 6.5 N·m (0.66 kg-m, 58 in-lb)
AV
MULTIFUNCTION SWITCH
AV-119
< ON-VEHICLE REPAIR >
[BASE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
N
A
O
P
MULTIFUNCTION SWITCH
Exploded View
INFOID:0000000000964613
REMOVAL
.
DISASSEMBLY
Removal and Installation
INFOID:0000000000964614
REMOVAL
1.
Remove cluster lid C. Refer to
.
2.
Remove multi function switch with center ventilator grille as a single unit.
3.
Remove multi function switch from center ventilator.
INSTALLATION
Installation is the reverse order of removal.
JSNIA0126ZZ
1.
Center ventilator grille
2.
Multifunction switch
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст