Infiniti G35 (V35) Sedan. Manual — part 1428
VTL-50
< ON-VEHICLE REPAIR >
DUCTS AND GRILLES
FOOT GRILLES : Removal and Installation
INFOID:0000000000959827
REMOVAL
1.
Remove mounting clips (A), and then remove foot grille (left) (1).
2.
Remove mounting clips (A), and then remove foot grille (right)
(1).
INSTALLATION
Installation is basically the reverse order of removal.
FOOT DUCTS
FOOT DUCTS : Exploded View
INFOID:0000000000959828
1.
Foot grille (left)
2.
Foot grille (right)
JSIIA0217ZZ
JSIIA0040ZZ
JSIIA0041ZZ
DUCTS AND GRILLES
VTL-51
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
1.
Aspirator
2.
Aspirator hose
3.
Front heater duct
4.
Foot duct (left)
5.
Defroster seal
6.
Packing
7.
Ventilator seal
8.
Ventilator door (left)
9.
Ventilator door (right)
10.
Foot duct (right)
11.
Defroster door lever
12. Foot door lever
13.
Ventilator door lever
14.
Ventilator door link
15. Main link
16.
Mode door motor bracket
17.
Mode door motor
18. Air mix door motor (passenger side)
19.
Intake sensor
20.
Intake sensor bracket
21. O-ring
22.
Low-pressure pipe 1
23.
High-pressure pipe 2
24. Expansion valve
25.
Cooler pipe grommet
26.
Insulator
27. Evaporator cover adapter
28.
Heater pipe bracket
29.
Case packing
30. Heater & cooling unit case (left)
31.
Heater pipe grommet
32.
Heater core
33. Air mix door motor (driver side)
*
34.
Foot door (left)
35.
Rear ventilator door
36. Foot door (right)
37.
Max. cool door lever
38.
Foot door link
39. Defroster door link
40.
Max. cool door link
41.
Main link sub
42. Evaporator cover
43.
Heater & cooling unit case (right)
44.
Evaporator
45. Drain hose
46.
Clamp
47.
Air mix door (Slide door)
48. Air mix door adapter
JSIIA0016GB
VTL-52
< ON-VEHICLE REPAIR >
DUCTS AND GRILLES
FOOT DUCTS : Removal and Installation
INFOID:0000000000959829
REMOVAL
1.
Remove heater & cooling unit assembly. Refer to
VTL-35, "Removal and Installation"
.
2.
Remove mounting screws (A), and then remove heater pipe
cover (1).
3.
Remove mounting screws (B), and then remove foot duct (left)
(2).
4.
Remove air mix door motor (passenger side). Refer to
VTL-41, "Removal and Installation"
.
5.
Remove mode door motor. Refer to
VTL-39, "Removal and Installation"
.
6.
Remove mounting screws (A), and then remove evaporator
cover (1).
7.
Remove mounting screws (B), and then remove foot duct (right)
(2).
INSTALLATION
Installation is basically the reverse order of removal.
REAR FLOOR DUCT 1 (WITHOUT REAR VENTILATOR)
REAR FLOOR DUCT 1 (WITHOUT REAR VENTILATOR) : Exploded View
INFOID:0000000000959830
49. Heater pipe cover
50.
Max. cool door (left)
51.
Defroster door (left)
52. Center case
53.
Defroster door (right)
54.
Max. cool door (right)
*
With left and right ventilation temperature separately system.
for symbols in the figure.
JSIIA0106ZZ
JSIIA0107ZZ
DUCTS AND GRILLES
VTL-53
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
REAR FLOOR DUCT 1 (WITHOUT REAR VENTILATOR) : Removal and Installation
INFOID:0000000000959831
REMOVAL
1.
Remove center console. Refer to
IP-12, "Removal and Installation"
2.
Remove Instrument side panel (RH). Refer to
IP-12, "Removal and Installation"
.
3.
Remove AV control unit. Refer to
AV-111, "Removal and Installation"
TION),
AV-292, "Removal and Installation"
(BOSE AUDIO WITHOUT NAVIGATION),
4.
Remove mounting clip (A).
5.
Remove mounting clip (B), and then peel back floor carpet to a
point where rear floor duct 1 is visible.
6.
Remove rear floor duct 1 to rightward.
INSTALLATION
Installation is basically the reverse order of removal.
REAR FLOOR DUCT 1 & REAR VENTILATOR DUCT 1(WITH REAR VENTILA-
TOR)
REAR FLOOR DUCT 1 & REAR VENTILATOR DUCT 1(WITH REAR VENTILATOR)
: Exploded View
INFOID:0000000000959832
1.
Rear floor duct 1 (without rear venti-
lator)
2.
Rear floor duct 2 (left)
3.
Rear floor duct 2 (right)
4.
Rear floor duct 1& rear ventilator
duct 1
5.
Rear ventilator duct 2
6.
Console mask
7.
Rear ventilator grille (Console lid as-
sembly)
A.
With rear ventilator
JSIIA0019ZZ
JSIIA0074ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст