Infiniti G35 (V35) Sedan. Manual — part 942
PRE-INSPECTION FOR DIAGNOSTIC
MIR-95
< ON-VEHICLE MAINTENANCE >
[WITHOUT ADP]
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
ON-VEHICLE MAINTENANCE
PRE-INSPECTION FOR DIAGNOSTIC
Basic Inspection
INFOID:0000000000962381
BASIC INSPECTION
1.
INSPECTION START
1.
Check the service history.
2.
Check the following parts.
• Fuse/circuit breaker blown.
• Poor connection, open or short circuit of harness connector.
• Battery voltage.
Is the inspection result normal?
YES
>> Inspection end.
NO
>> Repair or replace the malfunctioning parts.
MIR-96
< ON-VEHICLE REPAIR >
[WITHOUT ADP]
INSIDE MIRROR
ON-VEHICLE REPAIR
INSIDE MIRROR
Exploded View
INFOID:0000000000962382
Removal and Installation
INFOID:0000000000962383
REMOVAL
1.
Remove inside mirror finisher (if equipped).
2.
Remove nut of mirror base.
3.
Slide the mirror upward to remove.
4.
Disconnect the connector (if equipped).
INSTALLATION
Install in the reverse order of removal.
1.
Inside mirror
2.
Inside mirror finisher (if equipped)
3.
Mirror base
Refer to
for symbols in the figure.
PIIB5780E
DOOR MIRROR
MIR-97
< ON-VEHICLE REPAIR >
[WITHOUT ADP]
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
DOOR MIRROR
Exploded View
INFOID:0000000000962384
Removal and Installation
INFOID:0000000000962385
REMOVAL
1.
Remove the front door finisher. Refer to
INT-10, "Removal and Installation"
2.
Remove the corner cover.
3.
Disconnect the door mirror harness connector.
4.
Remove the door mirror mounting nuts, and remove the door mirror assembly.
CAUTION:
Do not damage the mirror bodies.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Do not damage the mirror bodies.
1.
Corner cover
2.
Door mirror assembly
Clip
JMLIA0001ZZ
MIR-98
< ON-VEHICLE REPAIR >
[WITHOUT ADP]
DOOR MIRROR REMOTE CONTROL SWITCH
DOOR MIRROR REMOTE CONTROL SWITCH
Exploded View
INFOID:0000000000962386
Removal and Installation
INFOID:0000000000962387
REMOVAL
1.
Remove the power window main switch finisher (2).
Refer to
INT-10, "Removal and Installation"
.
2.
Remove door mirror remote control switch (1) from power win-
dow main switch finisher (2) using screw driver (A).
INSTALLATION
Install in the reverse order of removal.
: Pawl
JMLIA0011ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст