Infiniti G35 (V35) Sedan. Manual — part 698
EXT-30
< ON-VEHICLE REPAIR >
DOOR SASH MOLDING
DOOR SASH MOLDING
Exploded View
INFOID:0000000000961810
Removal and Installation
INFOID:0000000000961811
FRONT DOOR SASH MOLDING
Removal
1.
Remove door mirror assembly. Refer to
MIR-67, "Removal and Installation"
.
2.
Remove front door weather strip.
3.
Release roof portion of glass run.
1.
Front door sash molding
2.
Rear door sash molding (front)
3.
Rear door sash molding (rear)
4.
Molding clip
5.
Front door panel
6.
Rear door panel
7.
Body side outer panel
8.
Front door weather strip
9.
Front door sash
10. Rear door weather strip
11.
Rear door sash
12. Double-faced adhesive tape
Clip
JMKIA0083GB
DOOR SASH MOLDING
EXT-31
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
4.
Remove front door sash molding (1) connection between door
panel and molding from glass run side, using a remover tool (A).
5.
Remove front door sash molding (1).
Installation
Install in the reverse order of removal.
REAR DOOR SUSH MOLDING
Removal
1.
Remove rear door weather strip.
2.
Release roof portion of glass run.
3.
Remove rear door sash molding (1) connection between door
panel and molding from glass run side, using a remover tool (A).
4.
Remove rear door sash molding (front) (1).
5.
Release rear door sash molding connection between rear door
panel and molding (1), using a remover tool (A), and take off
double-faced adhesive tape.
6.
Remove rear door sash molding (rear) (1).
Installation
Install in the reverse order of removal.
CAUTION:
• l Do not let air between contact surfaces when installing.
• l To secure contact, do not wash vehicle within 24 hours after installation.
• Do not use a material for remover tool (A) which could damage door panel.
JMKIA0113GB
JMKIA0114GB
JMKIA0115GB
EXT-32
< ON-VEHICLE REPAIR >
DOOR OUTSIDE MOLDING
DOOR OUTSIDE MOLDING
Exploded View
INFOID:0000000000961812
Removal and Installation
INFOID:0000000000961813
REMOVAL
FRONT DOOR OUTSIDE MOLDING
1.
Remove front door finisher. Refer to
INT-10, "Removal and Installation"
2.
Remove door mirror assembly. Refer to
MIR-67, "Removal and Installation"
.
3.
Twists and pull up to upper side, and then remove front door out-
side molding (1).
REAR DOOR OUTSIDE MOLDING
1.
Front door outside molding
2.
Front door panel
3.
Rear door outside molding
4.
Rear door panel
Pawl
JMKIA0084GB
JMKIA0116GB
DOOR OUTSIDE MOLDING
EXT-33
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
1.
Remove rear door finisher. Refer to
INT-10, "Removal and Installation"
.
2.
Twists and pull up to upper side, and then remove rear door out-
side molding (1).
INSTALLATION
Install in the reverse order of removal.
JMKIA0117GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст