Infiniti G35 (V35) Sedan. Manual — part 988
PCS-6
< FUNCTION DIAGNOSIS >
[IPDM E/R]
POWER CONTROL SYSTEM
POWER CONTROL SYSTEM
System Diagram
INFOID:0000000000964173
System Description
INFOID:0000000000964174
COOLING FAN CONTROL
IPDM E/R outputs pulse duty signal (PWM signal) to the cooling fan control module according to the status of
the cooling fan speed request signal received from ECM via CAN communication. Refer to
.
ALTERNATOR CONTROL
IPDM E/R outputs power generation command signal (PWM signal) to the alternator according to the status of
the power generation command value signal received from ECM via CAN communication. Refer to
Component Parts Location
INFOID:0000000000964175
JSMIA0004GB
1.
IPDM E/R
A.
Engine room dash panel (RH)
JPMIA0065ZZ
PCS
SIGNAL BUFFER SYSTEM
PCS-7
< FUNCTION DIAGNOSIS >
[IPDM E/R]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
SIGNAL BUFFER SYSTEM
System Diagram
INFOID:0000000000964176
System Description
INFOID:0000000000964177
• IPDM E/R reads the status of the oil pressure switch and transmits the oil pressure switch signal to BCM via
CAN communication. Refer to
MWI-22, "WARNING LAMPS/INDICATOR LAMPS : System Description"
• IPDM E/R reads the status of the hood switch and transmits the hood switch signal to BCM via CAN commu-
nication. Refer to
• IPDM E/R receives the rear window defogger status signal from BCM via CAN communication and transmits
it to ECM and AV control unit via CAN communication. Refer to
Component Parts Location
INFOID:0000000000964178
JSMIA0005GB
1.
IPDM E/R
A.
Engine room dash panel (RH)
JPMIA0065ZZ
PCS-8
< FUNCTION DIAGNOSIS >
[IPDM E/R]
POWER CONSUMPTION CONTROL SYSTEM
POWER CONSUMPTION CONTROL SYSTEM
System Diagram
INFOID:0000000000964179
System Description
INFOID:0000000000964180
OUTLINE
• IPDM E/R incorporates a power consumption control function that reduces the power consumption accord-
ing to the vehicle status.
• IPDM E/R changes its status (control mode) with the sleep wake up signal received from BCM via CAN com-
munication.
Normal mode (wake-up)
- CAN communication is normally performed with other control units.
- Individual unit control by IPDM E/R is normally performed.
Low power consumption mode (sleep)
- Low power consumption control is active.
- CAN transmission is stopped.
SLEEP MODE ACTIVATION
• IPDM E/R judges that the sleep-ready conditions are fulfilled when the ignition switch is OFF and none of the
conditions below are present. Then it transmits a sleep-ready signal (ready) to BCM via CAN communica-
tion.
- Front wiper fail-safe operation
- Outputting signals to actuators
- Switches or relays operating
- Auto active test is starting
- Emergency OFF
- Hood switch status is kept for 50 ms or more.
- Output requests are being received from control units via CAN communication.
• IPDM E/R stops CAN communication and enters the low power consumption mode when it receives a sleep
wake up signal (sleep) from BCM and the sleep-ready conditions are fulfilled.
WAKE-UP OPERATION
• IPDM E/R changes from the low power consumption mode to the normal mode when it receives a sleep
wake-up signal (wake up) from BCM or any of the following conditions is fulfilled. In addition, it transmits a
sleep-ready signal (not-ready) to BCM via CAN communication to report the CAN communication start.
- Ignition switch ON
- The hood switch status changes.
- An output request is received from a control unit via CAN communication.
Component Parts Location
INFOID:0000000000964181
JPMIA0069GB
PCS
POWER CONSUMPTION CONTROL SYSTEM
PCS-9
< FUNCTION DIAGNOSIS >
[IPDM E/R]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
1.
BCM
2.
IPDM E/R
3.
Unified meter and A/C amp.
4.
Driver seat control unit
A.
Dash side lower (passenger side)
B.
Engine room dash panel (RH)
C.
Behind Cluster lid C
D.
Backside of the seat cushion (driver
seat)
JPMIA0072ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст