Infiniti G35 (V35) Sedan. Manual — part 683
EXL-174
< ECU DIAGNOSIS >
[XENON TYPE]
AFS CONTROL UNIT
CONSULT indication
Fail-safe
AFS OFF indicator
lamp
Reference
U1000: CAN COMM CIRCUIT
×
×
U1010: CONTROL UNIT (CAN)
×
×
B2503, B2504: SWIVEL ACTUATOR [RH, LH]
×
×
B2514: HI SEN UNUSUAL [RR]
×
B2516: SHIFT SIG [P, R]
×
×
B2517: VEHICLE SPEED SIG
×
×
B2519: LEVELIZER CALIB
×
B2521: ECU CIRC
×
×
C0126: ST ANG SEN SIG
×
×
C0428: ST ANGLE SEN CALIB
×
×
EXTERIOR LIGHTING SYSTEM SYMPTOMS
EXL-175
< SYMPTOM DIAGNOSIS >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
SYMPTOM DIAGNOSIS
EXTERIOR LIGHTING SYSTEM SYMPTOMS
Symptom Table
INFOID:0000000000962520
CAUTION:
Perform the self-diagnosis with CONSULT-III before the symptom diagnosis. Perform the trouble diag-
nosis if any DTC is detected.
Symptom
Possible cause
Inspection item
Headlamp does not
switch to the high beam.
One side
• Fuse
• Harness between IPDM E/R
and the front combination lamp
• Front combination lamp
(High beam solenoid)
• IPDM E/R
Headlamp (HI) circuit
Refer to
.
Both sides
Symptom diagnosis
"BOTH SIDE HEADLAMPS DO NOT SWITCH TO HIGH BEAM"
Refer to
High beam indicator lamp is not turned ON.
(Headlamp switches to the high beam.)
• Combination meter
• Unified meter and A/C amp.
• Unified meter and A/C amp.
Data monitor "HI-BEAM IND"
• BCM (HEAD LAMP)
Active test "HEADLAMP"
Headlamp does not
switch to the low beam.
One side
Front combination lamp (High
beam solenoid)
—
Both sides
• Combination switch
• Harness between the combina-
tion switch and BCM
• BCM
Combination switch
Refer to
.
High beam request signal
• BCM
• IPDM E/R
IPDM E/R
Data monitor "HL HI REQ"
IPDM E/R
—
Headlamp is not turned
ON.
One side
• Fuse
• Xenon bulb
• Harness between IPDM E/R
and the front combination lamp
• Front combination lamp (xenon
headlamp)
• IPDM E/R
Headlamp (LO) circuit
Refer to
.
Both sides
Symptom diagnosis
"BOTH SIDE HEADLAMPS (LO) ARE NOT TURNED ON"
Refer to
Headlamp is not turned
OFF.
When the ignition
switch is turned ON
The ignition switch is
turned OFF (After acti-
vating the battery sav-
er).
IPDM E/R
—
Headlamp is not turned ON/OFF with the lighting
switch AUTO.
• Combination switch
• Harness between the combina-
tion switch and BCM
• BCM
Combination switch
Refer to
.
• Optical sensor
• Harness between the optical
sensor and BCM
• BCM
Optical sensor
Refer to
.
EXL-176
< SYMPTOM DIAGNOSIS >
[XENON TYPE]
EXTERIOR LIGHTING SYSTEM SYMPTOMS
Front fog lamp is not
turned ON.
One side
• Front fog lamp bulb
• Harness between IPDM E/R
and the front combination lamp
• Front combination lamp
• IPDM E/R
Front fog lamp circuit
Refer to
.
Both side
Symptom diagnosis
"BOTH SIDE FRONT FOG LAMPS ARE NOT TURNED ON"
Refer to
Front fog lamp is not turned ON.
Parking lamp is not turned ON.
• Fuse
• Parking lamp bulb
• Harness between IPDM E/R
and the front combination lamp
• Front combination lamp
• IPDM E/R
Parking lamp circuit
Refer to
.
Tail lamp is not turned ON.
• Harness between IPDM E/R
and the rear combination lamp
• Rear combination lamp
Tail lamp circuit
Refer to
.
License plate lamp is not turned ON.
• Harness between IPDM E/R
and the license plate lamp
• License plate lamp
License plate lamp circuit
Refer to
.
Tail lamp and the license plate lamp are not turned
ON.
• Fuse
• Harness between IPDM E/R
and the rear combination lamp
• IPDM E/R
Tail lamp circuit
Refer to
.
• Parking lamp, the tail lamp and the license plate
lamp are not turned ON.
• Parking lamp, the tail lamp and the license plate
lamp are not turned OFF.
(Each illumination is turned ON/OFF.)
Symptom diagnosis
"PARKING, LICENSE PLATE AND TAIL LAMPS ARE NOT TURNED
ON"
Refer to
Turn signal lamp does not
blink.
Indicator lamp is nor-
mal.
(The applicable side
performs the high flash-
er activation.
• Harness between BCM and
each turn signal lamp
• Turn signal lamp bulb
Turn signal circuit
Refer to
.
Indicator lamp is includ-
ed
• Combination switch
• Harness between the combina-
tion switch and BCM
• BCM
Combination switch
Refer to
Turn signal indicator lamp
does not blink.
(The turn signal indicator
lamp is normal.)
One side
Combination meter
—
Both sides
(Always)
• Turn signal indicator lamp sig-
nal
- Unified meter and A/C amp.
- BCM
• Combination meter
• Unified meter and A/C amp.
Data monitor "TURN IND"
• BCM (FLASHER)
Active test "FLASHER"
Both sides
(Only when activating
the hazard warning
lamp with the ignition
switch OFF)
• The combination meter power
supply and the ground circuit
• Combination meter
Combination meter
Power supply and the ground circuit
Refer to
.
• Hazard warning lamp does not activate.
• Hazard warning lamp continues activating.
(Turn signal is normal.)
• Hazard switch
• Harness between the hazard
switch and BCM
• BCM
Hazard switch
Refer to
.
Symptom
Possible cause
Inspection item
EXTERIOR LIGHTING SYSTEM SYMPTOMS
EXL-177
< SYMPTOM DIAGNOSIS >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
Headlamp auto aiming does not activate. (AFS is
normal.)
• Harness between AFS control
unit and aiming motor
• Front combination lamp
(Aiming motor)
• AFS control unit
Aiming motor
Refer to
.
AFS OFF indicator lamp is not turned ON.
• AFS OFF indicator lamp signal
- Unified meter and A/C amp.
- AFS control unit
• Combination meter
Unified meter and A/C amp.
Data monitor "AFS OFF IND"
Symptom
Possible cause
Inspection item
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст