Infiniti G35 (V35) Sedan. Manual — part 1414
TM-348
< DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
MID SUN GEAR, REAR SUN GEAR, HIGH AND LOW REVERSE CLUTCH HUB
9.
Install needle bearing and bearing race to high and low reverse
clutch hub.
CAUTION:
Take care with the direction of needle bearing. Refer to
289, "Location of Adjusting Shims, Needle Bearings, Thrust
Washers and Snap Rings"
.
Inspection
INFOID:0000000000957206
• High and Low Reverse Clutch Hub Snap Ring, Rear Sun Gear Snap Ring
Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the snap ring.
• 1st One-way Clutch
Check frictional surface for wear or damage.
CAUTION:
If necessary, replace the 1st one-way clutch.
• Mid Sun Gear
Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the mid sun gear.
• Rear Sun Gear
Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the rear sun gear.
• High and Low Reverse Clutch Hub
Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the high and low reverse clutch hub.
SCIA2854E
HIGH AND LOW REVERSE CLUTCH
TM-349
< DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
HIGH AND LOW REVERSE CLUTCH
Exploded View
INFOID:0000000000957207
Disassembly
INFOID:0000000000957208
1.
Remove bearing race from high and low reverse clutch drum.
2.
Using a flat-bladed screwdriver, remove snap ring from high and
low reverse clutch drum.
3.
Remove drive plates, driven plates and retaining plate from high
and low reverse clutch drum.
Assembly
INFOID:0000000000957209
1.
Install drive plates, driven plates and retaining plate in high and low reverse clutch drum.
CAUTION:
1.
High and low reverse clutch drum
2.
Driven plate
3.
Retaining plate
4.
Snap ring
5.
Drive plate
6.
Bearing race
SCIA5239E
SCIA5215E
SCIA2868E
TM-350
< DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
HIGH AND LOW REVERSE CLUTCH
Take care with the order of plates.
2.
Using a flat-bladed screwdriver, install snap ring in high and low
reverse clutch drum.
3.
Install bearing race to high and low reverse clutch drum.
CAUTION:
Take care with the direction of needle bearing. Refer to
289, "Location of Adjusting Shims, Needle Bearings, Thrust
Washers and Snap Rings"
.
Inspection
INFOID:0000000000957210
Check the following, and replace tranmission assembly if necessary.
• High and Low Reverse Clutch Snap Ring
Check for deformation, fatigue or damage.
• High and Low Reverse Clutch Drive Plates
Check facing for burns, cracks or damage.
• High and Low Reverse Clutch Retaining Plate and Driven Plates
Check facing for burns, cracks or damage.
1
: Snap ring
2
: Retaining plate
3
: Drive plate
4
: Driven plate
Drive plate /
Driven plate
: 4/4
SCIA6735E
SCIA2868E
SCIA5215E
DIRECT CLUTCH
TM-351
< DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
DIRECT CLUTCH
Exploded View
INFOID:0000000000957211
Disassembly
INFOID:0000000000957212
1.
Using a flat-bladed screwdriver, remove snap ring from direct
clutch drum.
2.
Remove drive plates, driven plates, dish plate and retaining
plates from direct clutch drum.
Assembly
INFOID:0000000000957213
1.
Install drive plates, driven plates, dish plate and retaining plates in direct clutch drum.
CAUTION:
Take care with the order of plates.
1.
Direct clutch drum
2.
Dish plate
3.
Retaining plate
4.
Driven plate
5.
Retaining plate
6.
Snap ring
7.
Drive plate
SCIA7015E
SCIA2868E
1
: Snap ring
2
: Retaining plate
3
: Drive plate
4
: Driven plate
5
: Dish plate
Drive plate /
Driven plate
: 5/4
SCIA6952E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст