Infiniti G35 (V35) Sedan. Manual — part 919
MIR-3
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
Removal and Installation . . . . . . . . . . .
DOOR MIRROR . . . . . . . . . . . . ..
Exploded View . . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
DOOR MIRROR REMOTE CONTROL
SWITCH . . . . . . . . . . . . . . . ..
Exploded View . . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
DISASSEMBLY AND ASSEMBLY . . . ..
DOOR MIRROR . . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . . .
Disassembly . . . . . . . . . . . . . . .
MIR-4
< BASIC INSPECTION >
[WITH ADP]
DIAGNOSIS AND REPAIR WORKFLOW
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
INFOID:0000000000962307
DETAILED FLOW
1.
OBTAIN INFORMATION ABOUT SYMPTOM
Interview the customer to obtain the malfunction information (conditions and environment when the malfunc-
tion occurred) as much as possible when the customer brings the vehicle in.
>> GO TO 2.
2.
REPRODUCE THE MALFUNCTION INFORMATION
Check the malfunction on the vehicle that the customer describes.
Inspect the relation of the symptoms and the condition when the symptoms occur.
>> GO TO 3.
3.
PERFORM “BASIC INSPECTION”
Perform the basic inspection.Refer to
>> GO TO 4.
4.
IDENTIFY THE MALFUNCTIONING SYSTEM WITH “SYMPTOM DIAGNOSIS”
Use “Symptom diagnosis” from the symptom inspection result in step 2. Then identify where to start perform-
ing the diagnosis based on possible causes and symptoms.
>> GO TO 5.
5.
IDENTIFY MALFUNCTIONING PARTS WITH “COMPONENT DIAGNOSIS”
Perform the diagnosis with “Component diagnosis” of the applicable system.
>> GO TO 6.
6.
REPAIR OR REPLACE THE MALFUNCTIONING PARTS
Repair or replace the specified malfunctioning parts.
>> GO TO 7.
7.
FINAL CHECK
Check that malfunctions are not reproduced when obtaining the malfunction information from the customer,
referring to the symptom inspection result in step 2.
Is the malfunctioning part repaired or replaced?
YES
>> Trouble diagnosis is completed.
NO
>> GO TO 3.
DOOR MIRROR SYSTEM
MIR-5
< FUNCTION DIAGNOSIS >
[WITH ADP]
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
FUNCTION DIAGNOSIS
DOOR MIRROR SYSTEM
System Diagram
INFOID:0000000000962308
System Description
INFOID:0000000000962309
Automatic drive positioner linked operation
ADP-15, "AUTOMATIC DRIVE POSITIONER SYSTEM : System Description"
Manual operation
• Automatic drive positioner (ADP) control unit receives changeover switch signal and perform the LH/RH
control of door mirror motor that supplies electric power when changeover switch is operated.
• Automatic drive positioner control unit receives mirror switch signal and supplies electric power to door mir-
ror motor when mirror switch is operated.
INPUT/OUTPUT SIGNAL CHART
Component Parts Location
INFOID:0000000000962310
JMLIA0006GB
Switch
Input Signal to ADP
ADP function
Acutuator
Mirror switch
Mirror switch signal
Door mirror motor control
Door mirror motor
Changeover switch
Changeover switch signal
MIR-6
< FUNCTION DIAGNOSIS >
[WITH ADP]
DOOR MIRROR SYSTEM
Component Description
INFOID:0000000000962311
1.
Door mirror remote control switch D7 2.
Door mirror (driver side) D3
3.
Door mirror (passenger side) D33
4.
Automatic drive positioner control
unit M51,M52
A,
View with instrument driver lower
panel removed
JMLIA0004ZZ
Component
Function
Automatic drive positioner control
unit
Door mirror is supplied with power after receiving the input of the MIRROR SWITCH and
CHANGEOVER SWITCH.
Mirror switch
It transmits mirror face adjust operation to AUTOMATIC DRIVE POSITIONER CONTROL
UNIT.
Changeover switch
It transmits the LH/RH control of door mirror that supplies power to AUTOMATIC DRIVE PO-
SITIONER CONTROL UNIT.
Door mirror
It makes mirror face operate from side to side and up and down via integrated motor.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст