Infiniti G35 (V35) Sedan. Manual — part 818
INL-100
< ON-VEHICLE REPAIR >
STEP LAMP
STEP LAMP
Exploded View
INFOID:0000000000962619
Removal and Installation
INFOID:0000000000962620
CAUTION:
Disconnect the battery negative terminal or the fuse.
REMOVAL
1.
Insert any appropriate tool into the gap between the step lamp and the door trim. Remove the step lamp.
2.
Disconnect the connector.
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000000962621
CAUTION:
Disconnect the battery negative terminal or the fuse.
STEP LAMP BULB
1.
Remove the step lamp.
2.
Remove the lens.
3.
Remove the bulb.
1.
Step lamp case
2.
Bulb
3.
Lens
A
Metal clip
JPLIA0062ZZ
PERSONAL LAMP
INL-101
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
PERSONAL LAMP
Exploded View
INFOID:0000000000962622
NOTE:
Replace the personal lamp case as a set (right and left). Before installing the headlining assembly, remove the
personal lamp case. Refer to
Removal and Installation
INFOID:0000000000962623
CAUTION:
Disconnect the battery negative terminal or the fuse.
REMOVAL
1.
Insert any appropriate tool into the gap between the lens. Remove the lens.
2.
Press the both side pawls (A) to the arrow direction (
).
Remove the personal lamp finisher.
NOTE:
Replace the personal lamp case as a set (right and left). Remove the
personal lamp case after installing the headlining assembly. Refer to
INSTALLATION
Install in the reverse order of removal.
NOTE:
The following is easier to install the personal lamp finisher with the headlining installed.
1.
Personal lamp case
2.
Personal lamp finisher
3.
Bulb
4.
Lens
JPLIA0060ZZ
JPLIA0087ZZ
INL-102
< ON-VEHICLE REPAIR >
PERSONAL LAMP
• Press the personal lamp finisher to the headlining. Pull the per-
sonal lamp case pawl to the arrow direction (
) with any appropri-
ate tool.
Replacement
INFOID:0000000000962624
CAUTION:
Disconnect the battery negative terminal or the fuse.
PERSONAL LAMP BULB
1.
Insert any appropriate tool into the gap between the lens. Remove the lens.
2.
Remove the bulb.
JPLIA0088ZZ
TRUNK ROOM LAMP
INL-103
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
TRUNK ROOM LAMP
Exploded View
INFOID:0000000000962625
Removal and Installation
INFOID:0000000000962626
CAUTION:
Disconnect the battery negative terminal or the fuse.
REMOVAL
1.
Widen the pawl (A). Open the lens (1).
2.
Remove the bulb.
3.
Pressing the pawl (B) to the arrow direction (
). Pull out the
trunk room lamp.
4.
Disconnect the connector.
5.
Remove the trunk room lamp.
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000000962627
CAUTION:
Disconnect the battery negative terminal or the fuse.
TRUNK ROOM LAMP BULB
1.
Widen the lens pawl. Open the lens.
2.
Remove the bulb.
1.
Trunk room lamp
2.
Bulb
A
Pawl (for lens fixing)
B.
Pawl (for case installation)
JPLIA0065ZZ
SKIB8336J
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст