Infiniti G35 (V35) Sedan. Manual — part 91
AV-136
< FUNCTION DIAGNOSIS >
[BOSE AUDIO WITHOUT NAVIGATION]
HANDS-FREE PHONE SYSTEM
Component Description
INFOID:0000000000964635
1.
Center speaker
2.
Tweeter LH
3.
Front door squawker LH
4.
Front door woofer LH
5.
Rear door speaker LH
6.
Antenna amp.
7.
BOSE amp.
8.
Woofer
9.
TEL adapter unit
10. Satellite radio tuner
11. Rear door speaker RH
12. Satellite radio antenna
13. Auxiliary input jacks
14. Front door woofer RH
15. Front door squawker RH
16. Tweeter RH
17. Microphone
18. Steering switch
19. Preset switch
20. AV control unit
21. Multifunction switch
22. Display unit
A.
Within rear pillar finisher LH
B.
Rear parcel shelf lower part (left side) C.
Lower part of rear parcel shelf (on the
right side)
JSNIA0171ZZ
Part name
Description
AV CONTORL UNIT
• Inputs TEL voice signal or voice guidance signal from TEL adapter unit and
outputs it to BOSE amp. during reception.
• Connects with TEL adapter unit and AV communication and controls hands
free phone system.
DISPLAY UNIT
• Display image is controlled by the serial communication from AV control unit.
• Inputs RGB image signal (RGB, RGB area and RGB synchronizing) from AV
control unit and displays the status of hands free phone system.
BOSE AMP.
Inputs TEL voice signal or voice guidance signal from AV control unit and outputs
it to front speaker and center speaker.
FRONT DOOR WOOFER
Outputs the TEL voice signal or voice guidance signal from Bose amp.
FRONT DOOR SQUAWKER
TWEETER
AV
HANDS-FREE PHONE SYSTEM
AV-137
< FUNCTION DIAGNOSIS >
[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
N
A
O
P
PRESET SWITCH
• Adjust the sound when using TEL.
• The operation signal is transmitted to the AV control unit via AV communica-
tion.
STEERING SWITCH
• The hands free phone system can be operated.
• Steering switch signal (operation signal) is output to AV control unit.
MICROPHONE
• Uses when operating the hands-free phone.
• Outputs Mic. signal (TEL voice signal) to the TEL adapter unit.
• The power (Mic. power supply) is supplied from the TEL adapter unit.
TEL ADAPTER UNIT
• Receives the steering switch signal (operation signal) from the steering switch.
• Inputs the TEL voice signal from TEL antenna during reception and outputs it
to the AV control unit.
• Inputs the TEL voice signal from microphone during speech recognition and
outputs it to the TEL antenna.
• Controlled by AV communication sent from AV control unit.
TEL ANTENNA
Connects with the portable telephone via Bluetooth
®
and communicates the TEL
voice signal.
Part name
Description
AV-138
< FUNCTION DIAGNOSIS >
[BOSE AUDIO WITHOUT NAVIGATION]
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
Diagnosis Description
INFOID:0000000000964636
Multifunction switch and preset switch self-diagnosis function
The ON/OFF operation (continuity) of each switch in the multifunction switch and preset switch can be
checked.
Self-diagnosis mode
• Press the “BACK” switch and the “UP” switch of the 4-direction
switches within 10 seconds after turning the ignition switch from
OFF to ACC and hold them for 3 seconds or more. The buzzer
sounds, all indicators of the preset switch illuminate, and the self-
diagnosis mode starts.
• The continuity of each switch at the ON position can be checked
by pressing the switch. The buzzer sounds if the switch is normal.
CAUTION:
The hazard switch and CD eject switch cannot be checked.
Finishing self-diagnosis mode
Self-diagnosis mode is canceled when turning the ignition switch OFF.
MULTI AV SYSTEM on board diagnosis function
• The AV control unit diagnosis function starts up with multifunction switch operation and the AV control unit
performs a diagnosis for each unit in the system during the on board diagnosis.
• Perform a CONSULT-III diagnosis if the on board diagnosis does not start, e.g., the screen does not display
anything, the multifunction switch does not function. etc.
On board diagnosis
Description
• The trouble diagnosis function has a self-diagnosis mode for conducting trouble diagnosis automatically and
a confirmation/adjustment mode for operating manually.
• Self-diagnosis mode performs the AV control unit diagnosis and the connection diagnosis between each of
the units that make up the system, and it indicates the results to the display.
• The confirmation/adjustment mode allows the technician to check, modify or adjust the vehicle signals and
set values, as well as to monitor the system error records and system communication status. The check,
modify or adjust actions generally require human intervention and judgment (the system cannot make judg-
ment automatically.
On board diagnosis item
JSNIA0136GB
Mode
Description
Self Diagnosis
• AV control unit diagnosis
• Perform the connection diagnosis between each of the units.
AV
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
AV-139
< FUNCTION DIAGNOSIS >
[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
N
A
O
P
STARTING PROCEDURE
1.
Start the engine.
2.
Turn the audio system OFF.
3.
While pushing the “SETTING” button, turn the volume control
dial clockwise or counterclockwise for 40 clicks or more. (When
the self-diagnosis mode is started, a short beep will be heard.)
• Shifting from current screen to previous screen is performed
by pushing “BACK” button.
4.
The trouble diagnosis initial screen is displayed, and then the
items of “Self Diagnosis” and “Confirmation/Adjustment” can be
selected.
Self-diagnosis mode
1.
Start the self-diagnosis function and select “Self-diagnosis”.
-
Self-diagnosis subdivision screen is displayed, and the self-
diagnosis mode starts.
-
The bar graph visible on the center of the self-diagnosis subdivi-
sion screen indicates progress of the trouble diagnosis.
Confirmation/
Adjustment
Display Diagnosis
The confirmations of the tint with the color spectrum bar display and
shading of color with the gradation bar display can be performed.
Vehicle Signals
Diagnosis of signals can be performed for vehicle speed, parking brake,
lights, ignition switch, and reverse.
Speaker Test
The connection of a speaker can be confirmed by test tone.
Climate Control
Start auto air conditioner system self-diagnosis.
Error History
The system malfunction and the frequency when occurred in the past are
displayed. When the malfunctioning item is selected, the time and place
that the selected malfunction last occurred are displayed.
Vehicle CAN Diagnosis
The transmitting/receiving of CAN communication can be monitored.
AV COMM Diagnosis
The communication condition of each unit of Multi AV system can be
monitored.
Delete Unit Connection Log
Erase the connection history of unit and error history
Initialize Settings
Initializes the AV control unit memory.
Mode
Description
JSNIA0137GB
JSNIA0138GB
JSNIA0139GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст