Infiniti G35 (V35) Sedan. Manual — part 409
DLN-70
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ETX13B]
MAINSHAFT
2.
Remove snap ring from mainshaft.
3.
Remove spacer from mainshaft.
4.
Remove electric controlled coupling and sprocket from main-
shaft.
5.
Remove needle bearing from mainshaft.
Assembly
INFOID:0000000000957297
1.
Install needle bearing to mainshaft.
CAUTION:
Apply ATF to periphery of needle bearing.
2.
Install sprocket and electric controlled coupling to mainshaft.
3.
Install spacer to main shaft.
4.
Install snap ring to mainshaft.
CAUTION:
Never reuse snap ring.
5.
Install mainshaft assembly to rear case, then install front case
and rear case. Refer to
Inspection
INFOID:0000000000957298
Check items below. If necessary, replace them with new ones.
CASES
• Contact surfaces of bearing for wear, damage, etc.
• Damage and cracks of case.
BEARING
SDIA1602E
PDIA0273E
SDIA1602E
PDIA0293E
MAINSHAFT
DLN-71
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ETX13B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
• Damage and rough rotation of bearing.
SHAFT
• Damage, peeling, dent, uneven wear, bending, etc. of shaft.
GEARS AND CHAIN
• Excessive wear, damage, peeling, etc. of gear and chain.
PDIA0300E
PDIA0294E
SDIA2365E
DLN-72
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ETX13B]
FRONT DRIVE SHAFT AND DRIVE CHAIN
FRONT DRIVE SHAFT AND DRIVE CHAIN
Exploded View
INFOID:0000000000957299
Disassembly
INFOID:0000000000957300
1.
Separate front case and rear case. Refer to
.
1.
Drive chain
2.
Front drive shaft rear bearing
3.
Front drive shaft
4.
Front drive shaft front bearing
5.
Sprocket
6.
Mainshaft
7.
Needle bearing
8.
Snap ring
9.
Mainshaft bearing
10. Front case
11.
Front oil seal
12. Mainshaft oil seal
13. Oil cover
14. Temperature sensor
15. Electric controlled coupling
16. Spacer
17. Snap ring
18. O-ring
19. Oil gutter
20. Drain plug
21. Baffle plate
22. Rear bearing
23. Snap ring
24. Spacer
25. Rear oil seal
26. Companion flange
27. Self-lock nut
28. Breather tube
29. Rear case
30. Harness bracket
31. Retainer
32. Filler plug
33. Gasket
PDIA0244E
FRONT DRIVE SHAFT AND DRIVE CHAIN
DLN-73
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ETX13B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
2.
Remove drive chain and front drive shaft while tapping front
drive shaft with plastic hammer.
CAUTION:
Never tap drive chain.
3.
Remove front drive shaft front bearing, using the drift [SST:
ST31214000 (J-25269-B)] and puller.
4.
Remove front drive shaft rear bearing, using the drift [SST:
ST31214000 (J-25269-B)] and puller.
Assembly
INFOID:0000000000957301
1.
Install front drive shaft front bearing, using the drift [SST:
ST33200000 (J-26082)].
PDIA0257E
PDIA0269E
PDIA0270E
PDIA0276E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст