Infiniti G35 (V35) Sedan. Manual — part 289
CCS
C1A26 ECD MODE MALFUNCTION
CCS-67
< COMPONENT DIAGNOSIS >
[INTELLIGENT CRUISE CONTROL]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
2.
Adjust laser beam aiming. Refer to
CCS-7, "LASER BEAM AIMING ADJUSTMENT : Special Repair
.
>> GO TO 6.
6.
CHECK ICC SYSTEM
1.
Erase DTC and perform ICC system action test. Then perform self-diagnosis of ICC sensor integrated
unit. (For the details on the ICC system action test, refer to
CCS-11, "ACTION TEST : Special Repair
Requirement (Vehicle-To-Vehicle Distance Control Mode)"
).
2.
Check that no abnormal condition is present in the ICC system.
>> INSPECTION END
CCS-68
< COMPONENT DIAGNOSIS >
[INTELLIGENT CRUISE CONTROL]
C1A27 ECD POWER SUPPLY CIRCUIT
C1A27 ECD POWER SUPPLY CIRCUIT
Description
INFOID:0000000000965446
ECD (ELECTRONICALLY CONTROLLED DECELERATION)
• Receives deceleration degree commandment value signal from ICC sensor integrated unit, and controls
brake fluid pressure with the motor [built in ABS actuator and electric unit (control unit)].
• ECD control-related signals are transmitted by ABS actuator and electric unit (control unit) to ICC sensor
integrated unit with CAN communication.
NOTE:
If DTC C1A27 is detected along with DTC U1000, U0415 or U0121 first diagnose the DTC U1000, U0415 or
U0121.
• DTC U1000: Refer to
• DTC U0415: Refer to
.
• DTC U0121: Refer to
.
DTC Logic
INFOID:0000000000965447
DTC DETECTION LOGIC
Diagnosis Procedure
INFOID:0000000000965448
1.
PERFORM SELF-DIAGNOSIS OF ICC SENSOR INTEGRATED UNIT
1.
Perform self-diagnosis of ICC sensor integrated unit.
2.
Check if DTC “CAN COMM CIRCUIT [U1000]” (DTC 100) or “VDC CAN CIR 1 [U0415]” (DTC 126), “VDC
CAN CIR 2 [U0121]” (DTC 127) other than “ECD PWR SUPLY CIR [C1A27]” (DTC 27) is detected.
Is any DTC detected?
YES
>> GO TO 2.
NO
>> GO TO 3.
2.
DIAGNOSIS FOR DETECTED DTC
Perform diagnosis on the detected DTC and repair or replace the applicable item. Refer to
.
>> GO TO 6.
3.
CHECK POWER SUPPLY CIRCUIT OF ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
Check power supply circuit of ABS actuator and electric unit (control unit). Refer to
.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> GO TO 4.
4.
REPAIR OR REPLACE ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) POWER SUPPLY
Repair or replace ABS actuator and electric unit (control unit) power supply.
>> GO TO 6.
5.
PERFORM SELF-DIAGNOSIS OF ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
DTC No.
(On board
display)
Trouble diagnosis name
DTC detecting condition
Possible cause
C1A27
(27)
ECD PWR SUPLY CIR
ECD system power supply voltage is excessively
low.
• ABS actuator and electric unit (con-
trol unit) power supply circuit
• ABS actuator and electric unit (con-
trol unit)
CCS
C1A27 ECD POWER SUPPLY CIRCUIT
CCS-69
< COMPONENT DIAGNOSIS >
[INTELLIGENT CRUISE CONTROL]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
1.
Perform self-diagnosis of ABS actuator and electric unit (control unit).
2.
Repair or replace applicable item. Refer to
>> GO TO 6.
6.
CHECK ICC SYSTEM
1.
Erase DTC and perform ICC system action test. Then perform self-diagnosis of ICC sensor integrated
unit. (For the details on the ICC system action test, refer to
CCS-11, "ACTION TEST : Special Repair
Requirement (Vehicle-To-Vehicle Distance Control Mode)"
).
2.
Check that no abnormal condition is present in the ICC system.
>> INSPECTION END
CCS-70
< COMPONENT DIAGNOSIS >
[INTELLIGENT CRUISE CONTROL]
U0121 VDC CAN 2
U0121 VDC CAN 2
Description
INFOID:0000000000965449
ABS actuator and electric unit (control unit) transmits VDC system signal to ICC sensor integrated unit with
CAN communication.
NOTE:
If DTC U0121 is detected along with DTC U1000, first diagnose the DTC U1000. Refer to
DTC Logic
INFOID:0000000000965450
DTC DETECTION LOGIC
Diagnosis Procedure
INFOID:0000000000965451
1.
PERFORM SELF-DIAGNOSIS OF ICC SENSOR INTEGRATED UNIT
1.
Perform self-diagnosis of ICC sensor integrated unit.
2.
Check if DTC “CAN COMM CIRCUIT [U1000]” (DTC 100) other than “VDC CAN CIR2 [U0121]” (DTC
127) is detected.
Is any DTC detected?
YES
>> GO TO 2.
NO
>> GO TO 3.
2.
CAN COMMUNICATION INSPECTION
Perform the CAN communication system inspection. Repair or replace the applicable item. Refer to
>> GO TO 6.
3.
PERFORM SELF-DIAGNOSIS OF ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
1.
Perform self-diagnosis of ABS actuator and electric unit (control unit).
2.
Check if DTC is detected. Refer to
.
Is any DTC detected?
YES
>> GO TO 4.
NO
>> GO TO 5.
4.
REPAIR OR REPLACE APPLICABLE ITEM
Repair or replace the applicable item identified by the self-diagnosis result.
>> GO TO 6.
5.
REPLACE ICC SENSOR INTEGRATED UNIT
1.
Replace ICC sensor integrated unit.
2.
Adjust laser beam aiming. Refer to
CCS-7, "LASER BEAM AIMING ADJUSTMENT : Special Repair
.
>> GO TO 6.
6.
CHECK ICC SYSTEM
DTC No.
(On board
display)
Trouble diagnosis name
DTC detecting condition
Possible cause
U0121
(127)
VDC CAN CIR2
When a mismatch occurs between a VDC system
signal transmitted from ABS actuator electric unit
(control unit) and a VDC system signal received by
ICC sensor integrated unit.
ABS actuator and electric unit (control
unit)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст