Infiniti G35 (V35) Sedan. Manual — part 1337
TM-40
< DISASSEMBLY AND ASSEMBLY >
[6MT: FS6R31A]
TRANSMISSION ASSEMBLY
6.
Remove check ball plug and then remove check ball spring and
check ball from adapter plate.
7.
Remove retaining pin using a pin punch and then remove 3rd-
4th fork rod bracket and 3rd-4th fork rod.
8.
Remove retaining pin using a pin punch and then remove 3rd-
4th shift fork and 3rd-4th fork rod (reversal side).
9.
Remove check balls and interlock pin from adapter plate.
10. Remove retaining pin using a pin punch and then remove 1st-
2nd shift fork and 1st-2nd fork rod.
PCIB0144E
PCIB0145E
PCIB0601E
PCIB0146E
PCIB0602E
TRANSMISSION ASSEMBLY
TM-41
< DISASSEMBLY AND ASSEMBLY >
[6MT: FS6R31A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
11. Remove interlock plunger and interlock pin from adapter plate.
12. Remove retaining pin using a pin punch and then remove
reverse shift fork and reverse fork rod.
13. Remove check balls from adapter plate.
14. Remove 5th-6th control lever mounting bolts and then remove
5th-6th control lever from adapter plate.
15. Remove retaining pin using a pin punch and then remove 5th-
6th fork rod bracket and 5th-6th fork rod.
PCIB0147E
SCIA1447E
PCIB0148E
PCIB0238E
PCIB0239E
TM-42
< DISASSEMBLY AND ASSEMBLY >
[6MT: FS6R31A]
TRANSMISSION ASSEMBLY
16. Remove retaining pin using a pin punch and then remove 5th-
6th fork rod (reversal side) and 5th-6th shift fork.
SHAFT AND GEAR
1.
Before disassembly, measure end play for each position. If the end play is outside the specifications, dis-
assemble and inspect.
• Mainshaft
• Counter shaft
2.
After removing snap ring and reverse coupling snap ring, using
a puller to remove reverse main gear and reverse synchronizer
assembly.
3.
Remove reverse main needle bearing.
PCIB0412E
End play standard value
: Refer to
PCIB0722E
End play standard value
: Refer to
PCIB0723E
SCIA1683E
TRANSMISSION ASSEMBLY
TM-43
< DISASSEMBLY AND ASSEMBLY >
[6MT: FS6R31A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
4.
After removing snap ring, using the puller to remove reverse
counter gear and counter rear bearing spacer.
5.
Remove mainshaft bearing retainer mounting bolts and then
remove mainshaft bearing retainer.
6.
Remove snap ring from mainshaft bearing.
7.
Carefully tap mainshaft with a plastic hammer and then remove
mainshaft assembly, main drive gear assembly and counter
shaft assembly from adapter plate.
8.
Remove main pilot bearing, pilot bearing spacer and 5th baulk
ring.
9.
Remove counter rear bearing from adapter plate.
10. Remove magnet from adapter plate.
SCIA1682E
PCIB1238E
SCIA1691E
SCIA1456E
PCIB0244E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст