Infiniti G35 (V35) Sedan. Manual — part 1072
PWC-120
< SYMPTOM DIAGNOSIS >
[FRONT & REAR WINDOW ANTI-PINCH]
POWER WINDOW RETAINED POWER OPERATION DOES NOT OPERATE
PROPERLY
POWER WINDOW RETAINED POWER OPERATION DOES NOT OPER-
ATE PROPERLY
Diagnosis Procedure
INFOID:0000000000961640
1.
CHECK FRONT DOOR SWITCH
Check front door switch.
Refer to
PWC-38, "Component Function Check"
.
Is the inspection result normal?
YES
>> Inspection end.
NO
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
DOES NOT OPERATE BY KEY CYLINDER SWITCH
PWC-121
< SYMPTOM DIAGNOSIS >
[FRONT & REAR WINDOW ANTI-PINCH]
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
DOES NOT OPERATE BY KEY CYLINDER SWITCH
Diagnosis Procedure
INFOID:0000000000961641
1.
PERFORM INITIALIZATION PROCEDURE
Perform initialization procedure.
Refer to
PWC-7, "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK FRONT DOOR LOCK ASSEMBLY (DRIVER SIDE) (KEY CYLINDER SWITCH)
Check front door lock assembly (driver side) (key cylinder switch).
Refer to
PWC-40, "Component Function Check"
.
Is the inspection result normal?
YES
>> Inspection end.
NO
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
PWC-122
< SYMPTOM DIAGNOSIS >
[FRONT & REAR WINDOW ANTI-PINCH]
KEYLESS POWER WINDOW DOWN DOES NOT OPERATE
KEYLESS POWER WINDOW DOWN DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000000961642
1.
CHECK INTELLIGENT KEY FUNCTION
Check Intelligent Key function.
Refer to
DLK-107, "Component Function Check"
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
NO
>> Replace BCM. Refer to
POWER WINDOW LOCK SWITCH DOES NOT FUNCTION
PWC-123
< SYMPTOM DIAGNOSIS >
[FRONT & REAR WINDOW ANTI-PINCH]
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
POWER WINDOW LOCK SWITCH DOES NOT FUNCTION
Diagnosis Procedure
INFOID:0000000000961643
1.
REPLACE POWER WINDOW MAIN SWITCH
Replace power window main switch.
Refer to
PWC-126, "Removal and Installation"
. After that, Refer to
SWITCH : Special Repair Requirement"
.
Is the inspection result normal?
YES
>> Inspection end.
NO
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст