Infiniti G35 (V35) Sedan. Manual — part 363
COMBINATION METER DISPLAY FUNCTION
DLK-113
< COMPONENT DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
COMBINATION METER DISPLAY FUNCTION
Description
INFOID:0000000000961220
Displays each operation method guide and warning for system malfunction.
Component Function Check
INFOID:0000000000961221
1.
CHECK FUNCTION
With CONSULT-III
Check the operation with (“LCD”) in the Active Test.
Is the inspection result normal?
YES
>> Meter display is OK.
NO
>> Refer to
DLK-113, "Diagnosis Procedure"
Diagnosis Procedure
INFOID:0000000000961222
1.
CHECK COMBINATION METER
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Check combination meter. Refer to
MWI-35, "Diagnosis Description"
2.
CHECK INTERMITTENT INCIDENT
GI-39, "Intermittent Incident"
.
>> INSPECTION END.
Is each warning displayed on meter display?
DLK-114
< COMPONENT DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
WARNING CHIME FUNCTION
WARNING CHIME FUNCTION
Description
INFOID:0000000000961223
Performs operation method guide and warning with buzzer.
Component Function Check
INFOID:0000000000961224
1.
CHECK FUNCTION
With CONSULT-III
1.
Check the operation with “INSIDE BUZZER” in the Active Test.
2.
Touch “TAKE OUT”, “KNOB”or “KEY”on screen.
Is the inspection result normal?
Yes
>> Warning buzzer into combination meter is OK.
No
>> Refer to
DLK-114, "Diagnosis Procedure"
Diagnosis Procedure
INFOID:0000000000961225
1.
CHECK METER BUZZER CIRCUIT
WCS-20, "Component Function Check"
.
Is the inspection result normal?
Yes
>> GO TO 2.
No
>> Repair or replace meter buzzer circuit.
2.
CHECK INTERMITTENT INCIDENT
GI-39, "Intermittent Incident"
>> INSPECTION END.
HAZARD FUNCTION
DLK-115
< COMPONENT DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
HAZARD FUNCTION
Description
INFOID:0000000000961226
Perform answer-back for each operation with number of blinks.
Component Function Check
INFOID:0000000000961227
1.
CHECK FUNCTION
Check hazard warning lamp (“FLASHER”) in Active Test.
Is the inspection result normal?
YES
>> Hazard warning lamp circuit is OK.
NO
>> Refer to
DLK-115, "Diagnosis Procedure"
Diagnosis Procedure
INFOID:0000000000961228
1.
CHECK HAZARD SWITCH CIRCUIT
EXL-83, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace hazard warning switch circuit.
2.
CHECK INTERMITTENT INCIDENT
GI-39, "Intermittent Incident"
.
>> INSPECTION END.
DLK-116
< COMPONENT DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
INTEGRATED HOMELINK TRANSMITTER
INTEGRATED HOMELINK TRANSMITTER
Description
INFOID:0000000000961229
Integrated Homelink Transmitter can store and transmit a maximum of 3 radio signals.
Allows operation of garage doors, gates, home and office lighting, entry door locks and security system, etc.
Integrated Homelink Transmitter power supply uses vehicle battery, which enables it to maintain every pro-
gram in case battery is discharged or removed.
Component Function Check
INFOID:0000000000961230
1.
CHECK FUNCTION
Check that system receiver (garage door opener, etc.) operates with original hand-held transmitter.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Receiver or hand-held transmitter is malfunctioning.
2.
CHECK ILLUMINATE
1.
Turn ignition switch “OFF”.
2.
Does red light of transmitter illuminate when any transmitter button is pressed?
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Refer to
DLK-116, "Diagnosis Procedure"
3.
CHECK TRANSMITTER
Check transmitter with Tool*.
*:For details, refer to Technical Service Bulletin.
Is the inspection result normal?
YES
>> Receiver or hand-held transmitter malfunction, not vehicle related.
NO
>> Replace auto anti-dazzling inside mirror (homelink universal transceiver). Refer to
.
Diagnosis Procedure
INFOID:0000000000961231
1.
CHECK POWER SUPPLY
1.
Disconnect auto anti-dazzling inside mirror (homelink universal transceiver) connector.
2.
Check voltage between auto anti-dazzling inside mirror (home link universal transceiver) harness connec-
tor and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>>
Check the following.
• 10A fuse [No. 3 located in the fuse block (J/B)]
• 10A fuse [No. 6 located in the fuse block (J/B)]
• Harness for open or short between fuse and auto anti-dazzling inside mirror (homelink universal
transceiver).
2.
CHECK GROUND CIRCUIT
Check continuity between auto anti-dazzling inside mirror (homelink universal transceiver) harness connector
and ground.
Auto anti-dazzling inside mirror
(Homelink universal transceiver)
connector
Terminal Condition
Voltage (V)
(Approx.)
R3
10
Ground
Ignition switch position:
LOCK
Battery voltage
6
Ignition switch position:
ON
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст