Infiniti I30 (A33). Manual — part 455
“DIAGNOSIS FOR SIGNALS FROM THE CAR” MODE
=NHEL0300S03
Description
NHEL0300S0301
In “Diagnosis for Signals from the Car” mode, following input sig-
nals to the NAVI control unit can be checked on the display.
Item
Indication
Vehicle condition
Vehicle Speed*
ON
Vehicle speed is greater than 0 km/h (0 MPH).
OFF
Vehicle speed is 0 km/h (0 MPH).
Light
ON
Lighting switch is in 1st or 2nd position.
OFF
Lighting switch is in “OFF” position.
IGN
ON
Ignition switch is in “ON” position.
OFF
Ignition switch is in “ACC” position.
Reverse*
ON
Selector/shift lever is in “Reverse” position.
OFF
Selector/shift lever is in other than “Reverse”
position.
*: When ignition switch is in “ACC” position, indication will be changed to “-”.
SEL527X
How to Perform
NHEL0300S0302
1.
Start the engine.
2.
Push “OPEN/CLOSE” switch and then open the display.
3.
Push both “MAP” and “D/N” switches at the same time for more
than 5 seconds.
4.
Select “Confirmation/ adjustment”.
SEL531X
5.
Select “Diagnosis for Signals from the Car”.
SEL542X
6.
Then “Diagnosis for Signals from the Car” mode is performed.
GI
MA
EM
LC
EC
FE
AT
AX
SU
BR
ST
RS
BT
HA
SC
IDX
NAVIGATION SYSTEM
Confirmation/Adjustment Mode (Cont’d)
EL-489
SEL527X
“CHECK THE MAP CD-ROM VERSION” MODE
=NHEL0300S04
How to Perform
NHEL0300S0401
1.
Start the engine.
2.
Push “OPEN/CLOSE” switch and then open the display.
3.
Push both “MAP” and “D/N” switches at the same time for more
than 5 seconds.
4.
Select “Confirmation/ adjustment”.
SEL531X
5.
Select “Navigation”.
SEL532X
6.
Select “Check the map CD-ROM version”.
SEL536X
7.
The version (parts number) of CD-ROM loaded to the NAVI
control unit will be displayed.
NAVIGATION SYSTEM
Confirmation/Adjustment Mode (Cont’d)
EL-490
“DIAGNOSE THE DISPLAY” MODE
=NHEL0300S05
Description
NHEL0300S0501
Use the “Diagnose the Display” mode to check the display color
brightness and shading. The NAVI control unit must be replaced if
the color brightness and shading are abnormal.
SEL527X
How to Perform
NHEL0300S0502
1.
Start the engine.
2.
Push “OPEN/CLOSE” switch and then open the display.
3.
Push both “MAP” and “D/N” switches at the same time for more
than 5 seconds.
4.
Select “Confirmation/ adjustment”.
SEL531X
5.
Select “Diagnose the Display”.
SEL540X
6.
Select “Display Color Spectrum Bar” or “Display Gradation
Bar”.
7.
Then color bar/gray scale will be displayed.
SEL541X
GI
MA
EM
LC
EC
FE
AT
AX
SU
BR
ST
RS
BT
HA
SC
IDX
NAVIGATION SYSTEM
Confirmation/Adjustment Mode (Cont’d)
EL-491
“LONGITUDE & LATITUDE” MODE
NHEL0300S06
Description
NHEL0300S0601
The “Longitude & Latitude” is used to confirm the longitude and
latitude of some optional area point.
SEL527X
How to Perform
NHEL0300S0602
1.
Start the engine.
2.
Push “OPEN/CLOSE” switch and then open the display.
3.
Push both “MAP” and “D/N” switches at the same time for more
than 5 seconds.
4.
Select “Confirmation/ adjustment”.
SEL531X
5.
Select “Navigation”.
SEL532X
6.
Select “Longitude & Latitude”.
SEL537X
7.
Adjust the pointer with using the joystick and touch “Set”.
8.
The longitude and latitude are displayed.
NAVIGATION SYSTEM
Confirmation/Adjustment Mode (Cont’d)
EL-492
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст