Infiniti I30 (A33). Manual — part 59
7. Vehicle Does Not Creep Forward in D, 2 or 1
Position
=NHAT0094
SYMPTOM:
Vehicle does not creep forward when selecting D, 2 or 1 posi-
tion.
1
CHECK A/T FLUID LEVEL
Check A/T fluid level again.
SAT638A
OK or NG
OK
©
GO TO 2.
NG
©
Refill ATF.
2
CHECK STALL REVOLUTION
Check stall revolution with selector lever in D position. Refer to “STALL TEST”, AT-61.
SAT493G
OK or NG
OK
©
GO TO 4.
NG
©
GO TO 3.
GI
MA
EM
LC
EC
FE
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
TROUBLE DIAGNOSES FOR SYMPTOMS
7. Vehicle Does Not Creep Forward in D, 2 or 1 Position
AT-233
3
DETECT MALFUNCTIONING ITEM
1. Remove control valve assembly. Refer to AT-280.
2. Check the following items:
I
Valves to control line pressure (Pressure regulator valve, pressure modifier valve, pilot valve and pilot filter)
I
Line pressure solenoid valve
3. Disassemble A/T.
4. Check the following items:
I
Oil pump assembly
I
Forward clutch assembly
I
Forward one-way clutch
I
Low one-way clutch
I
Low & reverse brake assembly
I
Torque converter
OK or NG
OK
©
GO TO 4.
NG
©
Repair or replace damaged parts.
4
CHECK LINE PRESSURE
Check line pressure at idle with selector lever in D position. Refer to “LINE PRESSURE TEST”, AT-65.
SAT494G
OK or NG
OK
©
GO TO 6.
NG
©
GO TO 5.
5
DETECT MALFUNCTIONING ITEM
1. Remove control valve assembly. Refer to AT-280.
2. Check the following items:
I
Valves to control line pressure (Pressure regulator valve, pressure modifier valve, pilot valve and pilot filter)
I
Line pressure solenoid valve
3. Disassemble A/T.
4. Check the following item:
I
Oil pump assembly
OK or NG
OK
©
GO TO 6.
NG
©
Repair or replace damaged parts.
TROUBLE DIAGNOSES FOR SYMPTOMS
7. Vehicle Does Not Creep Forward in D, 2 or 1 Position (Cont’d)
AT-234
6
CHECK A/T FLUID CONDITION
1. Remove oil pan.
2. Check A/T fluid condition.
SAT171B
OK or NG
OK
©
GO TO 8.
NG
©
GO TO 7.
7
DETECT MALFUNCTIONING ITEM
1. Remove control valve assembly. Refer to AT-280.
2. Check the following items:
I
Valves to control line pressure (Pressure regulator valve, pressure modifier valve, pilot valve and pilot filter)
I
Line pressure solenoid valve
3. Disassemble A/T.
4. Check the following items:
I
Oil pump assembly
I
Forward clutch assembly
I
Forward one-way clutch
I
Low one-way clutch
I
Low & reverse brake assembly
I
Torque converter
OK or NG
OK
©
GO TO 8.
NG
©
Repair or replace damaged parts.
8
CHECK SYMPTOM
Check again.
OK or NG
OK
©
INSPECTION END
NG
©
GO TO 9.
9
CHECK TCM INSPECTION
1. Perform TCM input/output signal inspection.
2. If NG, recheck TCM pin terminals for damage or loose connection with harness connector.
OK or NG
OK
©
INSPECTION END
NG
©
Repair or replace damaged parts.
GI
MA
EM
LC
EC
FE
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
TROUBLE DIAGNOSES FOR SYMPTOMS
7. Vehicle Does Not Creep Forward in D, 2 or 1 Position (Cont’d)
AT-235
8. Vehicle Cannot Be Started From D
1
=NHAT0095
SYMPTOM:
Vehicle cannot be started from D
1
on Cruise test — Part 1.
1
CHECK SYMPTOM
Is “6. Vehicle Does Not Creep Backward In R Position” OK?
Yes or No
Yes
©
GO TO 2.
No
©
Go to “6. Vehicle Does Not Creep Backward In R Position”, AT-229.
2
CHECK SELF-DIAGNOSTIC RESULTS
Does self-diagnosis show damage to vehicle speed sensor·A/T (revolution sensor), shift solenoid valve A, B or vehicle
speed sensor·MTR after cruise test?
SAT934FB
Yes or No
Yes
©
Check damaged circuit. Refer to “DTC P0720, P0750, P0755 or VHCL SPEED
SEN·MTR”, AT-114, 172, or 203.
No
©
GO TO 3.
3
CHECK THROTTLE POSITION SENSOR
Check throttle position sensor. Refer to EC-176, “DTC P0120 Throttle Position Sensor”.
SAT289K
OK or NG
OK
©
GO TO 4.
NG
©
Repair or replace throttle position sensor.
TROUBLE DIAGNOSES FOR SYMPTOMS
8. Vehicle Cannot Be Started From D
1
AT-236
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст