Infiniti I30 (A33). Manual — part 148
BODY ALIGNMENT
17
Panel Parts Matching Marks
A mark has been placed on each body panel to indicate the parts matching positions. When repairing parts damaged by an
accident which might affect the vehicle structure (members, pillars, etc.), more accurate and effective repair will be possible
by using these marks together with body alignment specifications.
View A
View C
View D
View B
View E
BODY ALIGNMENT
18
Description
All dimensions indicated in the figures are actual.
When using a tracking gauge, adjust both pointers to equal length. Then check the pointers and gauge itself to make
sure there is no free play.
When a measuring tape is used, check to be sure there is no elongation, twisting or bending.
Measurements should be taken at the center of the mounting holes.
An asterisk (
*
) following the value at the measuring point indicates that the measuring point on the other side is
symmetrically the same value.
The coordinates of the measurement points are the distances measured from the standard line of “X”, “Y” and “Z”.
Engine Compartment
Unit: mm
MEASUREMENT
BODY ALIGNMENT
19
Engine Compartment (Cont’d)
Unit: mm
: Center cowl top
: Side cowl top
: Strut tower
: Hoodledge
: Upper radiator core support
,
: Hood lock stay
: Upper radiator core support
,
: Side radiator core support
: Front side member
: Hood lock stay
,
: Lower radiator core support
,
: Front side member LH side
MEASUREMENT POINTS
,
: Front side member RH side
BODY ALIGNMENT
20
Underbody
Unit: mm
All dimensions indicated in this
figure are actual.
As vie
w
ed from underside
.
Figures marked with a
*
indicate symmetricall
y identical
dimensions on both right and left hand sides of the vehic
le
.
: Bolt head
MEASUREMENT
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст