Infiniti I30 (A33). Manual — part 570

HOW TO ERASE SELF-DIAGNOSIS RESULTS

=NHRS0043S05

With CONSULT-II

NHRS0043S0501

I

“SELF-DIAG [CURRENT]”
A current Self-diagnosis result is displayed on the CONSULT-II screen in real time.
After the malfunction is repaired completely, no malfunction is detected on “SELF-DIAG [CURRENT]”.

I

“SELF-DIAG [PAST]”
Return to the “SELF-DIAG [CURRETN]” CONSULT-II screen by pushing “BACK” key of CONSULT-II and
select “SELF-DIAG [CURRENT]” in SELECT DIAG MODE. Touch “ERASE” in “SELF-DIAG [CURRENT]”
mode.

NOTE:
If the memory of the malfunction in “SELF-DIAG [PAST]” is not erased, the User mode shows the sys-
tem malfunction by the operation of the warning lamp even if the malfunction is repaired completely.

SRS701

I

“TROUBLE DIAG RECORD”
The memory of “TROUBLE DIAG RECORD” cannot be erased.

Without CONSULT-II

NHRS0043S0502

After a malfunction is repaired, switch the ignition “OFF” for at least one second, then back “ON”. Diagnosis
mode returns to the User mode. At that time, the self-diagnostic result is cleared.

GI

MA

EM

LC

EC

FE

AT

AX

SU

BR

ST

BT

HA

SC

EL

IDX

SUPPLEMENTAL RESTRAINT SYSTEM (SRS)

Trouble Diagnoses Introduction (Cont’d)

RS-37

How to Perform Trouble Diagnoses for Quick
and Accurate Repair

=NHRS0044

A good understanding of the malfunction conditions can make troubleshooting faster and more accurate.
In general, each customer feels differently about a malfunction. It is important to fully understand the symp-
toms or conditions for a customer complaint.

INFORMATION FROM CUSTOMER

NHRS0044S01

WHAT . . Vehicle model
WHEN . . Date, Frequencies
WHERE . . Road conditions
HOW . . Operating conditions, Symptoms

PRELIMINARY CHECK

NHRS0044S02

Check that the following parts are in good order.

I

Battery [Refer to SC-4, “BATTERY”.]

I

Fuse [Refer to EL-18, “Fuse”, “POWER SUPPLY ROUTING”.]

I

System component-to-harness connections

SUPPLEMENTAL RESTRAINT SYSTEM (SRS)

How to Perform Trouble Diagnoses for Quick and Accurate Repair

RS-38

WORK FLOW

=NHRS0044S03

NOTE:
Seat belt pre-tensioner malfunction is indicated by “AIR BAG” warning lamp.

SRS799

*1: RS-38
*2: RS-44

*3: RS-45
*4: RS-54

*5: RS-48
*6: RS-59

GI

MA

EM

LC

EC

FE

AT

AX

SU

BR

ST

BT

HA

SC

EL

IDX

SUPPLEMENTAL RESTRAINT SYSTEM (SRS)

How to Perform Trouble Diagnoses for Quick and Accurate Repair (Cont’d)

RS-39

Schematic

NHRS0045

MRS369A

SUPPLEMENTAL RESTRAINT SYSTEM (SRS)

Schematic

RS-40