Infiniti M37 (2011 year). Manual — part 18
How to speak numbers :
INFINITI Voice Recognition requires a certain
way to speak numbers when giving voice com-
mands. Refer to the following examples.
General rule
Only single digits 0 (zero) to 9 can be used. (For
example, if you would like to say 500, “five zero
zero” can be used, but “five hundred” cannot.)
Examples
● 1-800-662-6200
– “One eight zero zero six six two six two
zero zero”
Improving Recognition of Phone numbers
You can improve the recognition of phone num-
bers by saying the phone number in three
groups of numbers. For example, when you try
to call 800-662-6200, say “eight zero zero”
first, and the system will then ask you for the
next three digits. Then, say “six six two”. After
recognition, the system will then ask for the last
four digits. Say, “six two zero zero”. Using this
method of phone digit entry can improve recog-
nition performance.
When speaking a house number, speak the
number “0” as “zero”. If the letter “o (Oh)” is
included in the house number, it will not be
recognized as the number “0 (zero)” even if you
speak “oh” instead of “zero”.
Please speak
“zero” for the number “0 (zero)”, “oh” for the
letter “o (oh)”
4-114
Monitor, climate, audio, phone and voice recognition systems
췽
—
—
07/15/10—tbrooks
墍
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Command List
Category Command:
Command
Action
Phone
Operates the Phone function
Navigation
Operates the Navigation function
Information
Displays the vehicle Information function
Audio
Operates the Audio function.
Help
Displays User Guide
● Phone Command:
Command
Action
Dial Number
Makes a call to a spoken phone number up to 10 digits.
Vehicle Phonebook
Makes a call to a contact that is stored in the Vehicle Phonebook.
Handset Phonebook
Makes a call to a contact that is stored in the mobile phone.
Call history
Incoming Calls
Makes a call to the incoming call number.
Outgoing Calls
Makes a call to the dialed number.
Missed Calls
Makes a call to the Missed calls number.
International Call
Makes an international call by allowing more than 10 digits to be spoken.
Change Number
Corrects the recognized phone number (available during phone number entry).
Monitor, climate, audio, phone and voice recognition systems
4-115
췽
—
—
07/15/10—tbrooks
墍
-------------------------------------------------------------------------------------------------------------------------------------------------------------
● Navigation Command:
Command
Action
Home
Sets a route to your home that is stored in the Address Book.
Address
Searches for a location by the street address specified, and sets a route to the location.
Places
Sets a route to a facility near the current vehicle location.
Address Book
Searches for stored information in the Address Book.
Previous Destinations
Sets a route to a previous destination.
● Information Command:
Command
Action
Fuel Economy
Displays fuel economy information.
Maintenance
Displays maintenance information.
Traffic Information
Turns the traffic information system ON and OFF.
Where am I?
Displays your current location.
● Audio Command:
Command
Action
AM
Turns to the AM band, selecting the station last played.
FM
Turns to the FM band, selecting the station last played.
XM
Turns to the XM Satellite band, selecting the channel last played.
Music Box
Turns on the “Music Box” hard drive audio system.
CD
Starts to play a CD.
4-116
Monitor, climate, audio, phone and voice recognition systems
췽
—
—
07/15/10—tbrooks
墍
-------------------------------------------------------------------------------------------------------------------------------------------------------------
● General Commands
Command
Action
Go back
Corrects the last recognition result to return to the previous screen
Exit
Cancels Voice Recognition
Monitor, climate, audio, phone and voice recognition systems
4-117
췽
—
—
07/15/10—tbrooks
墍
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Voice command examples
To use the INFINITI Voice Recognition function,
speaking one command is sometimes suffi-
cient, but at other times it is necessary to speak
two or more commands. As examples, some
additional basic operations by voice commands
are described here.
For navigation system commands, see the sepa-
rate Navigation System Owner’s Manual.
Example 1 - Placing a call to the phone number
800-662-6200:
1. Push the TALK
switch located on the
steering wheel.
2. The system announces, “Would you like
to access Phone, Navigation, Information,
Audio or Help?”
3. Speak “Phone”.
SAA3001
SAA2535
4-118
Monitor, climate, audio, phone and voice recognition systems
췽
—
—
07/15/10—tbrooks
墍
-------------------------------------------------------------------------------------------------------------------------------------------------------------
4. Speak “Dial Number”.
5. Speak “8 0 0”.
Selecting
the
“Manual
Controls”
key
switches the screen to the keypad to input
the phone number manually.
6. The system announces, “Please say the
next three digits or dial, or say change
number.”
7. Speak “6 6 2”.
SAA2536
SAA2537
SAA2538
Monitor, climate, audio, phone and voice recognition systems
4-119
췽
—
—
07/15/10—tbrooks
墍
-------------------------------------------------------------------------------------------------------------------------------------------------------------
8. The system announces, “Please say the
last four digits” or say change number.
9. Speak “6 2 0 0”.
10. The system announces, “Dial or Change
Number?”
11. Speak “Dial”.
12. The system makes a call to 800-662-
6200.
Note :
● You can also speak “800-662-6200” (10
continuous digits) or “662-6200” (7 continu-
ous digits), if the area code is not necessary.
However, the 3-3-4 digit grouping is recom-
mended for improved recognition. (See
“How to speak numbers” earlier in this
section.)
● You can only say a phone number using the
3-3-4 grouping, 7 digits, and 10 digits using
this command. Please use the “International
Call” command for all other formats.
● If you say “Change Number” during phone
number entry, the system will automatically
request that you repeat the number using
the 3-3-4 format. In this case please say the
area code first and then follow the prompts.
● Do not add a “1” in front of the area code
when speaking phone numbers.
● If the system does not recognize your com-
mand, please try repeating the command
using a natural voice. Speaking too slow or
too loudly may further decrease recognition
performance.
SAA2539
SAA2540
4-120
Monitor, climate, audio, phone and voice recognition systems
췽
—
—
07/15/10—tbrooks
墍
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Example 2 - Placing an international call to the
phone number 011-81-111-222-3333:
1. Push the TALK
switch located on the
steering wheel.
2. The system announces, “Would you like
to access Phone, Navigation, Information,
Audio or Help?”
3. Speak “Phone”.
4. Speak “International Call”.
SAA3001
SAA2535
SAA2536
Monitor, climate, audio, phone and voice recognition systems
4-121
췽
—
—
07/15/10—tbrooks
墍
-------------------------------------------------------------------------------------------------------------------------------------------------------------
5. Speak “011811112223333”.
6. Speak “Dial”.
7. System makes a call to 011-81-111-222-
3333.
Note :
Any digit input format is available in the Inter-
national Number input process.
INFINITI VOICE RECOGNITION
ALTERNATE COMMAND MODE
The following section is applicable when Alter-
nate Command Mode is activated.
When Alternate Command Mode is activated, an
expanded list of commands can be used after
pressing the TALK
switch. In this mode,
available commands are not fully shown on the
display or prompted. Review the expanded
command list when this mode is active. See
examples of Alternate Command Mode screens.
Please note that in this mode the recognition
success rate may be affected as the number of
available commands and ways of speaking each
command are increased. To improve the recog-
nition success rate, try using the Speaker Ad-
aptation Function available in that mode. (See
“Speaker adaptation function (for Alternate
Command Mode)” later in this section.) Other-
wise it is recommended that Alternate Com-
mand Mode be turned OFF and Standard Mode
be used for the best recognition performance.
SAA2541
SAA2542
4-122
Monitor, climate, audio, phone and voice recognition systems
췽
—
—
07/15/10—tbrooks
墍
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Activating Alternate Command Mode
When the Standard Mode is active, perform the
following steps to switch to the Alternate Com-
mand Mode.
1. Push the SETTING button on the instru-
ment panel.
2. Highlight the “Others” key.
3. Highlight the “Voice Recognition” key.
4. Highlight the “Alternate Command Mode”
key.
5. The confirmation message is displayed on
the screen. Push the “OK” key to activate
the Alternate Command Mode.
Displaying command list
If you are controlling the system by voice
commands for the first time or do not know the
appropriate voice command, perform the fol-
lowing procedure for displaying the voice com-
mand list (available only in Alternate Command
Mode).
1. Push the INFO button on the instrument
panel.
2. Select the “Others” key.
3. Select the “Voice Recognition” key.
4. Select the “Command List” key.
SAA2529
SAA2543
SAA2544
Monitor, climate, audio, phone and voice recognition systems
4-123
췽
—
—
07/15/10—tbrooks
墍
-------------------------------------------------------------------------------------------------------------------------------------------------------------
5. Select a category from the list.
6. Select an item.
7. If necessary, scroll the screen using the
INFINITI controller to view the entire list.
8. Press the BACK button to return to the
previous screen.
SAA2545
SAA2546
4-124
Monitor, climate, audio, phone and voice recognition systems
췽
—
—
07/15/10—tbrooks
墍
-------------------------------------------------------------------------------------------------------------------------------------------------------------
List of help commands
Phone Commands:
Command
Action
Dial Number
Makes a call to a spoken phone number.
Vehicle Phonebook
Makes a call to a contact that is stored in the Vehicle Phonebook.
Handset Phonebook
Makes a call to a contact that is stored in the mobile phone.
Call History
Incoming Calls
Makes a call to the incoming call number.
Outgoing Calls
Makes a call to the dialed number.
Missed Calls
Makes a call to the Missed calls number.
International Call
Makes an international call by allowing more than 10 digits to be spoken.
Navigation Commands:
Command
Action
Home
Sets a route to your home that is stored in the Address Book.
Address
Searches for a location by the street address specified, and sets a route to the location.
Places
Sets a route to a facility near the current vehicle location.
Address Book
Searches for stored information in the Address Book.
Previous Destinations
Sets a route to a previous destination.
Previous Start Point
Sets a route to a previous starting point.
Delete Destination
Deletes a destination.
Monitor, climate, audio, phone and voice recognition systems
4-125
췽
—
—
07/15/10—tbrooks
墍
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Information Commands:
Command
Action
Fuel Economy
Displays fuel economy information.
Maintenance
Displays maintenance information.
Tire Pressure (if so equipped)
Displays tire pressure information
Where am I?
Displays your current location.
Traffic Information
Turns the traffic information system ON and OFF.
Weather Information
Displays weather information.
Weather Map
Displays a weather map.
Audio Commands:
Command
Action
Music Box
Turns on the “Music Box” hard drive audio system.
CD
Starts to play a CD.
FM
Turns to the FM band, selecting the station last played.
AM
Turns to the AM band, selecting the station last played.
XM
Turns to the XM Satellite Radio band, selecting the channel last played.
USB
Turns on the USB memory.
Bluetooth Audio
Turns on the Bluetooth
姞 audio player.
4-126
Monitor, climate, audio, phone and voice recognition systems
췽
—
—
07/15/10—tbrooks
墍
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Help Commands:
Command
Action
Command List
Navigation Commands
Displays the navigation command list.
Phone Commands
Displays the phone command list.
Audio Commands
Displays the audio command list.
Information Commands
Displays the information command list.
Help Commands
Displays the help command list.
User Guide
Displays the User Guide.
Speaker Adaptation
The system can memorize the voices of up to three persons.
General Commands:
Command
Action
Go back
Corrects the last recognition result to return to the previous screen
Exit
Cancels Voice Recognition
Monitor, climate, audio, phone and voice recognition systems
4-127
췽
—
—
07/15/10—tbrooks
墍
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Displaying user guide
You can confirm how to use voice commands by
accessing a simplified User Guide, which con-
tains basic instructions and tutorials for several
voice commands.
1. Push the INFO button on the instrument
panel.
2. Select the “Others” key using the INFINITI
controller and push the ENTER button.
3. Highlight the “Voice Recognition” key us-
ing the INFINITI controller and push the
ENTER button.
4. Highlight the “User Guide” key using the
INFINITI controller and push the ENTER
button.
5. Highlight an item using the INFINITI con-
troller and push the ENTER button.
Available items :
● Getting Started
Describe the basics of how to operate the
INFINITI Voice Recognition system.
● Let’s Practice
Mode that allows practicing by following the
instructions of the system voice.
● Using the Address Book
Refer to Navigation System Owner’s Manual.
● Finding a Street Address (if so equipped)
Refer to Navigation System Owner’s Manual.
● Placing Calls
Tutorial for making a phone call by voice
command operation.
● Help on Speaking
Displays useful tips for how to correctly
speak commands in order for them to be
properly recognized by the system.
● Voice Recognition Settings
Describes the available voice recognition
settings.
● Adapting the System to Your Voice
Tutorial adapting the system to your voice.
USING THE SYSTEM
Initialization
When the ignition switch is pushed to the ON
position, INFINITI Voice Recognition is initial-
ized, which takes a few seconds. When com-
pleted, the system is ready to accept voice
commands. If the TALK
switch is pushed
before the initialization completes the display
will show the message: “Phonetic data down-
loaded. Please wait.” or a beep sounds.
SAA2547
4-128
Monitor, climate, audio, phone and voice recognition systems
췽
—
—
07/15/10—tbrooks
墍
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Before starting
To get the best performance from INFINITI Voice
Recognition, observe the following.
● Keep the interior of the vehicle as quiet as
possible. Close the windows to eliminate the
surrounding noises (traffic noises, vibration
sounds, etc.), which may prevent the system
from recognizing the voice commands cor-
rectly.
● When the air conditioner is in the AUTO
mode, the fan speed decreases automati-
cally for easy recognition.
● Wait until a tone sounds before speaking a
command.
● Speak in a natural voice without pausing
between words.
Giving voice command
1. Push and release the TALK
switch
located on the steering wheel.
2. A list of commands appears on the
screen,
and
the
system
announces,
“Please say a command”.
3. After the tone sounds and the icon on the
screen changes from
to
,
speak a command.
Operating tips :
● Voice commands cannot be accepted when
the icon is
.
● The list displayed can be scrolled by tilting
the menu control switch on the steering
wheel.
● If the command is not recognized, the sys-
tem announces, “Please say again”. Repeat
the command in a clear voice.
SAA3001
SAA2548
Monitor, climate, audio, phone and voice recognition systems
4-129
췽
—
—
07/15/10—tbrooks
墍
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст