Infiniti QX56 (JA60). Manual — part 223
LUGGAGE AREA ANTENNA
DLK-63
< COMPONENT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
3. Check continuity between Intelligent Key unit harness connector
(A) M70 terminals 35, 36 and ground.
Is the inspection result normal?
YES
>> GO TO 3
NO
>> Repair or replace harness between Intelligent Key unit and luggage area antenna.
3.
CHECK INSIDE KEY ANTENNA POWER SUPPLY SINGAL
1. Replace luggage area antenna. (New antenna or other antenna)
2. Connect Intelligent Key unit connector.
3. Check signal between Intelligent Key unit connector and ground
with oscilloscope.
Is the inspection result normal?
YES
>> Replace luggage area antenna.
NO
>> Replace Intelligent Key unit. Refer to
SEC-120, "Removal and Installation"
Intelligent Key
unit connector
Terminals
Luggage area an-
tenna connector
Terminals
Continuity
A: M70
35
B: B76
1
Yes
36
2
Item
Connector
Terminals
Continuity
Intelligent Key
unit
A: M70
35
Ground
No
36
ALKIA0588ZZ
Connector
Item
Terminals
Condition
Signal (V)
(Reference value)
(+)
(–)
M70
Intelligent
Key unit
35
Ground
Ignition
switch is
pushed.
ALKIA0587ZZ
PIIB7441E
DLK-64
< COMPONENT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
CENTER CONSOLE AREA ANTENNA (FRONT)
CENTER CONSOLE AREA ANTENNA (FRONT)
Description
INFOID:0000000005146917
Detects whether Intelligent Key is inside the vehicle.
Component Function Check
INFOID:0000000005146918
1.
CHECK INSIDE KEY ANTENNA INPUT SIGNAL
With CONSULT-III
1. Check “ANTENNA” in “Active Test” mode with CONSULT-III.
2. Touch “ROOM ANT2”.
3. When Intelligent Key is in center console area antenna (front) detection area, hazard lamps flash.
Is the inspection result normal?
YES
>> Center console area antenna (front) is OK.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000005146919
Regarding Wiring Diagram information, refer to
DLK-178, "Wiring Diagram — INTELLIGENT KEY SYSTEM —
1.
CHECK INSIDE KEY ANTENNA POWER SUPPLY SIGNAL
1. Turn ignition switch OFF.
2. Check signal between Intelligent Key unit connector and ground with an oscilloscope.
Is the inspection result normal?
YES
>> Center console area antenna (front) is OK.
NO
>> GO TO 2
2.
CHECK INSIDE KEY ANTENNA
1. Disconnect Intelligent Key unit connector and center console area antenna (front) connectors.
2. Check continuity between Intelligent Key unit harness connector (A) M70 terminals 13, 14 and center con-
sole area antenna (front) harness connector (B) M210 terminals 1, 2.
Test Item
Condition
Possible cause
ROOM ANT2
An excessive high or low voltage from inside
antenna is sent to the Intelligent Key Unit
• Center console area antenna (front)
• Between Intelligent Key unit and center console area an-
tenna (front)
Connector
Item
Terminals
Condition
Signal (V)
(Reference value)
(+)
(–)
M70
Intelligent
Key unit
13
Ground
Ignition
switch is
pushed.
ALKIA0583ZZ
PIIB7441E
CENTER CONSOLE AREA ANTENNA (FRONT)
DLK-65
< COMPONENT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
3. Check continuity between Intelligent Key unit harness connector
(A) M70 terminals 13, 14 and ground.
Is the inspection result normal?
YES
>> GO TO 3
NO
>> Repair or replace harness between Intelligent Key unit and center console area antenna (front).
3.
CHECK INSIDE KEY ANTENNA POWER SUPPLY SINGAL
1. Replace center console area antenna (front). (New antenna or other antenna)
2. Connect Intelligent Key unit connector.
3. Check signal between Intelligent Key unit connector and ground
with oscilloscope.
Is the inspection result normal?
YES
>> Replace center console area antenna (front).
NO
>> Replace Intelligent Key unit. Refer to
SEC-120, "Removal and Installation"
Intelligent Key
unit connector
Terminals
Center console area
antenna (front) con-
nector
Terminals
Continuity
A: M70
13
B: M210
1
Yes
14
2
Item
Connector
Terminals
Continuity
Intelligent Key
unit
A: M70
13
Ground
No
14
ALKIA0584ZZ
Connector
Item
Terminals
Condition
Signal (V)
(Reference value)
(+)
(–)
M70
Intelligent
Key unit
13
Ground
Ignition
switch is
pushed.
ALKIA0583ZZ
PIIB7441E
DLK-66
< COMPONENT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
OVERHEAD CONSOLE AREA ANTENNA
OVERHEAD CONSOLE AREA ANTENNA
Description
INFOID:0000000005146920
Detects whether Intelligent Key is inside the vehicle.
Component Function Check
INFOID:0000000005146921
1.
CHECK INSIDE KEY ANTENNA INPUT SIGNAL
With CONSULT-III
1. Check “ANTENNA” in “Active Test” mode with CONSULT-III.
2. Touch “ROOM ANT2”.
3. When Intelligent Key is in overhead console area antenna detection area, hazard lamps flash.
Is the inspection result normal?
YES
>> Overhead console area antenna is OK.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000005146922
Regarding Wiring Diagram information, refer to
DLK-178, "Wiring Diagram — INTELLIGENT KEY SYSTEM —
1.
CHECK INSIDE KEY ANTENNA POWER SUPPLY SIGNAL
1. Turn ignition switch OFF.
2. Check signal between Intelligent Key unit connector and ground with an oscilloscope.
Is the inspection result normal?
YES
>> Overhead console area antenna is OK.
NO
>> GO TO 2
2.
CHECK INSIDE KEY ANTENNA
1. Disconnect Intelligent Key unit connector and overhead console area antenna connectors.
2. Check continuity between Intelligent Key unit harness connector (A) M70 terminals 33, 34 and overhead
console area antenna harness connector (B) R210 terminals 1, 2.
Test Item
Condition
Possible cause
ROOM ANT2
An excessive high or low voltage from inside
antenna is sent to the Intelligent Key Unit
• Overhead console area antenna
• Between Intelligent Key unit and overhead console area
antenna
Connector
Item
Terminals
Condition
Signal (V)
(Reference value)
(+)
(–)
M70
Intelligent
Key unit
33
Ground
Ignition
switch is
pushed.
ALKIA0589ZZ
PIIB7441E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст