Infiniti QX56 (JA60). Manual — part 302
FRONT OIL SEAL
DLN-131
< ON-VEHICLE REPAIR >
[ATX14B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
FRONT OIL SEAL
Removal and Installation
INFOID:0000000005148888
REMOVAL
1. Partially drain the transfer fluid. Refer to
2. Remove the front propeller shaft. Refer to
DLN-186, "Removal and Installation"
.
3. Remove the companion flange self-lock nut using suitable tool.
4. Put a matching mark on top of the front drive shaft in line with
the mark on the companion flange.
CAUTION:
Use paint to make the matching mark on the front drive
shaft. Do not damage the front drive shaft.
5. Remove the companion flange using suitable tool.
6. Remove the front oil seal from the front case using Tool.
CAUTION:
Do not damage front case.
INSTALLATION
SDIA2657E
SDIA2658E
WDIA0193E
Tool number
: KV381054S0 (J-34286)
LDIA0144E
DLN-132
< ON-VEHICLE REPAIR >
[ATX14B]
FRONT OIL SEAL
1. Install the new front oil seal until it is flush with the end face of
the front case using Tool.
CAUTION:
• Do not reuse oil seal.
• Apply petroleum jelly to oil seal.
2. Align the matching mark of the front drive shaft with the match-
ing mark of the companion flange, then install the companion
flange.
3. Install the new self-lock nut. Tighten to the specified torque
using suitable tool. Refer to
CAUTION:
Do not reuse self-lock nut.
4. Install the front propeller shaft. Refer to
.
5. Refill the transfer with fluid and check for fluid leakage and fluid
Tool number : KV38100500 ( — )
SDIA2662E
SDIA2658E
LDIA0147E
REAR OIL SEAL
DLN-133
< ON-VEHICLE REPAIR >
[ATX14B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
REAR OIL SEAL
Removal and Installation
INFOID:0000000005148889
REMOVAL
1. Partially drain the transfer fluid. Refer to
.
2. Remove the rear propeller shaft. Refer to
DLN-196, "Removal and Installation"
3. Remove the dust cover from the rear case.
CAUTION:
Do not damage the rear case.
4. Remove the rear oil seal from the rear case using Tool.
CAUTION:
Do not damage the rear case.
INSTALLATION
1. Install the new rear oil seal until it is flush with the end face of the
rear case using Tool.
CAUTION:
• Do not reuse oil seal.
• Apply petroleum jelly to oil seal.
2. Apply petroleum jelly to the circumference of the new dust cover
(1). Position the new dust cover as shown.
CAUTION:
• Do not reuse dust cover.
• Position the projection in the position shown.
• Rear case assembly (2)
• Protrusions (A)
WDIA0127E
Tool number
: KV381054S0 (J-34286)
LDIA0139E
Tool number
: ST30720000 (J-25405)
LDIA0140E
AWDIA0550GB
DLN-134
< ON-VEHICLE REPAIR >
[ATX14B]
REAR OIL SEAL
3. Install the new dust cover to the rear case using Tool.
CAUTION:
• Do not reuse dust cover.
• Apply petroleum jelly to dust cover.
4. Install the rear propeller shaft. Refer to
.
5. Refill the transfer with fluid and check for fluid leakage and fluid
.
Tool number
: KV40105310 ( — )
PDIA0116E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст