Infiniti QX56 (JA60). Manual — part 692
MWI
MWI-3
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
Description . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . ...
THE DOOR OPEN WARNING CONTINUES
DISPLAYING, OR DOES NOT DISPLAY . . ..
Description . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . ...
PRECAUTION . . . . . . . . . . . ..
PRECAUTIONS . . . . . . . . . . . . ..
Precaution Necessary for Steering Wheel Rota-
tion After Battery Disconnect . . . . . . . . ...
ON-VEHICLE REPAIR . . . . . . . ...
COMBINATION METER . . . . . . . . .
Removal and Installation . . . . . . . . . ...
CLOCK . . . . . . . . . . . . . . .
MWI-4
< BASIC INSPECTION >
DIAGNOSIS AND REPAIR WORKFLOW
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
INFOID:0000000005146024
DETAILED FLOW
1.
CONFIRM SYMPTOM
Confirm symptom or customer complaint.
>> GO TO 2
2.
CHECK SELF-DIAGNOSIS OPERATION OF COMBINATION METER
Perform self-diagnosis of combination meter. Refer to
MWI-22, "Diagnosis Description"
.
Does self-diagnosis mode operate?
YES
>> GO TO 3
NO
>> Check power supply and ground circuit of combination meter. Refer to
. Then, GO TO 4
3.
CHECK COMBINATION METER (CONSULT-III)
Select “METER/M&A” on CONSULT-III and perform “SELF-DIAGNOSIS” of combination meter. Refer to
23, "CONSULT-III Function (METER/M&A)"
Self-diagnostic results content
No malfunction detected>>Repair or replace the cause of symptom. Then, GO TO 4
Malfunction detected>>Refer to
. Then, GO TO 4
4.
CONFIRM OPERATION
Does the combination meter operate normally?
YES or NO
YES
>> Inspection End.
NO
>> GO TO 1
MWI
METER SYSTEM
MWI-5
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
FUNCTION DIAGNOSIS
METER SYSTEM
METER SYSTEM
METER SYSTEM : System Diagram
INFOID:0000000005146025
METER SYSTEM : System Description
INFOID:0000000005146026
COMBINATION METER
• Speedometer, odo/trip meter, tachometer, fuel gauge, engine coolant temperature gauge, engine oil pres-
sure gauge, voltage gauge and information display are controlled by the unified meter control unit, which is
built into the combination meter.
• Warning and indicator lamps are controlled by the unified meter control unit and by components connected
directly to the combination meter.
• Digital meter is adopted for odo/trip meter.*
*The record of the odometer is kept even if the battery cable is disconnected. The record of the trip meter is
erased when the battery cable is disconnected.
• Odo/trip meter segments can be checked in diagnosis mode.
• Meter/gauge can be checked in diagnosis mode.
AWNIA0274GB
MWI-6
< FUNCTION DIAGNOSIS >
METER SYSTEM
METER SYSTEM : Arrangement of Combination Meter
INFOID:0000000005146027
AWNIA0200GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст