Infiniti QX56 (JA60). Manual — part 1051
WW-80
< ON-VEHICLE REPAIR >
FRONT WIPER DRIVE ASSEMBLY
FRONT WIPER DRIVE ASSEMBLY
Wiper Motor and Linkage
INFOID:0000000005146802
REMOVAL AND INSTALLATION
Removal
1. Remove the cowl top. Refer to
EXT-18, "Removal and Installation"
.
2. Remove wiper frame bolts, and remove wiper frame assembly.
3. Remove wiper motor from wiper frame assembly.
Installation
CAUTION:
• Do not drop the wiper motor or cause it to contact other parts.
• Check the grease conditions of the motor arm and wiper link joint(s). Apply grease if necessary.
1. Connect wiper motor to connector. Turn the wiper switch ON to operate wiper motor, then turn the wiper
switch OFF (auto stop).
2. Disconnect wiper motor connector.
3. Install wiper motor to wiper frame assembly, and install wiper frame assembly.
4. Install cowl top. Refer to
EXT-18, "Removal and Installation"
5. Ensure that wiper blades stop within proper clearance. Refer to
.
ALLIA0369GB
1.
Wiper arm covers
2.
Wiper arm nuts
3.
Front RH wiper arm and blade assembly
4.
Wiper frame bolts
5.
Wiper frame assembly
6.
Wiper motor to frame bolts
7.
Wiper motor spacer
8.
Wiper motor
9.
Front LH wiper arm and blade assembly
FRONT WASHER TUBE
WW-81
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
FRONT WASHER TUBE
Washer Tube Layout
INFOID:0000000005146803
WKIA4465E
1.
Rear washer nozzle
2.
Washer nozzles
3.
Washer fluid reservoir
WW-82
< ON-VEHICLE REPAIR >
FRONT WASHER NOZZLE
FRONT WASHER NOZZLE
Washer Nozzle Adjustment
INFOID:0000000005146804
• This vehicle is equipped with non-adjustable washer nozzles.
• If not satisfied with washer fluid spray coverage, confirm that the
washer nozzle is installed correctly.
• If the washer nozzle is installed correctly, and the washer fluid
spray coverage is not satisfactory, replace washer nozzle.
PKIA2552E
WASHER TANK
WW-83
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
WASHER TANK
Washer Fluid Reservoir
INFOID:0000000005146805
REMOVAL AND INSTALLATION
Removal
1. Remove side washer fluid reservoir screw (2).
• Front and rear washer motor (1).
2. Remove front and rear washer motor connector.
3. Remove washer fluid level sensor connector.
4. Disconnect front and rear washer hoses.
5. Remove front washer fluid reservoir screw (2).
6. Remove washer fluid reservoir (1) from the vehicle.
Installation
Installation is in the reverse order of removal.
CAUTION:
After installation, add washer fluid up to the upper level of the washer fluid reservoir inlet and check
for leaks.
ALLIA0372ZZ
LKIA0412E
WKIA4563E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст