Infiniti QX56 (JA60). Manual — part 979
TM-218
< DISASSEMBLY AND ASSEMBLY >
DISASSEMBLY
53. Remove spring retainer and return spring from transmission
case.
54. Remove seal rings from drum support.
55. Remove needle bearing from drum support edge surface.
56. Remove reverse brake piston from transmission case using
compressed air. Refer to
.
CAUTION:
Care should be taken not to abruptly blow air. It makes the
piston incline, and as a result, it becomes hard to disas-
semble the pistons.
SCIA2324E
SCIA3333E
SCIA2796E
SCIA5047E
DISASSEMBLY
TM-219
< DISASSEMBLY AND ASSEMBLY >
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
57. Remove D-rings from reverse brake piston.
58. Knock out retaining pin using suitable tool.
59. Remove manual shaft retaining pin using suitable tool.
60. Remove manual plate (with parking rod) from manual shaft.
61. Remove parking rod from manual plate.
SCIA6330E
SCIA2328E
SCIA2329E
SCIA5715E
SCIA5220E
TM-220
< DISASSEMBLY AND ASSEMBLY >
DISASSEMBLY
62. Remove manual shaft from transmission case.
63. Remove manual shaft oil seals using suitable tool.
CAUTION:
Do not scratch transmission case.
64. Remove detent spring and spacer from transmission case.
65. Remove snap ring from transmission case using suitable tool.
66. Remove servo assembly (with return spring) from transmission
case.
SCIA5716E
SCIA2331E
SCIA5248E
SCIA2333E
SCIA5679E
DISASSEMBLY
TM-221
< DISASSEMBLY AND ASSEMBLY >
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
67. Remove return spring from servo assembly.
68. Remove O-rings from servo assembly.
69. Remove needle bearing (1) from rear extension (2WD models)
or adapter case (4WD models).
70. Remove parking actuator support from rear extension (2WD
models) or adapter case (4WD models).
71. Remove parking pawl (with return spring) and pawl shaft from
rear extension (2WD models) or adapter case (4WD models).
SCIA5717E
SCIA5719E
SCIA6179J
SCIA3423E
SCIA3424E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст