Infiniti G35 (V35). Manual — part 21
TROUBLE DIAGNOSIS
AT-75
D
E
F
G
H
I
J
K
L
M
A
B
AT
41
Slips/Will
Not
Engage
While accelerating in
5th, engine races or
slippage occurs.
ON vehicle
1. A/T fluid level and state
2. Line pressure test
3. Accelerator pedal position sensor
4. CAN communication line
5. ATF pressure switch 1 and front brake solenoid valve
6. Control valve with TCM
OFF vehicle
7. Torque converter
8. Oil pump assembly
9. Front brake (brake band)
10. Input clutch
11. Gear system
12. High and low reverse clutch
42
Slips at lock-up.
ON vehicle
1. A/T fluid level and state
2. Line pressure test
3. Engine speed signal
4. Turbine revolution sensor
5. Torque converter clutch solenoid valve
6. CAN communication line
7. Control valve with TCM
OFF vehicle
8. Torque converter
9. Oil pump assembly
43
No creep at all.
Refer to
"Vehicle Does Not
Creep Backward in
“R” Position"
"Vehicle Does Not
Creep Forward in “D”
Position"
ON vehicle
1. A/T fluid level and state
2. Line pressure test
3. Accelerator pedal position sensor
4. ATF pressure switch 5 and direct clutch solenoid valve
5. PNP switch
6. CAN communication line
7. A/T position
8. Control valve with TCM
OFF vehicle
9. Torque converter
10. Oil pump assembly
11. 1st one-way clutch
12. Gear system
13. Reverse brake
14. Direct clutch
15. Forward one- way clutch (Parts behind drum support is
impossible to perform inspection by disassembly. Refer to
16. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to
No.
Items
Symptom
Condition
Diagnostic Item
Reference
page
AT-76
TROUBLE DIAGNOSIS
44
Slips/Will
Not
Engage
Vehicle cannot run in
all positions.
ON vehicle
1. A/T fluid level and state
2. Line pressure test
3. PNP switch
4. A/T position
5. Control valve with TCM
OFF vehicle
6. Oil pump assembly
7. Gear system
8. Output shaft
45
With selector lever in
“D” position, driving is
not possible.
ON vehicle
1. A/T fluid level and state
2. Line pressure test
3. PNP switch
4. A/T position
5. Control valve with TCM
OFF vehicle
6. Torque converter
7. Oil pump assembly
8. 1st one-way clutch
9. Gear system
10. Reverse brake
11. Forward one- way clutch (Parts behind drum support is
impossible to perform inspection by disassembly. Refer to
12. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to
46
With selector lever in
“R” position, driving is
not possible.
ON vehicle
1. A/T fluid level and state
2. Line pressure test
3. PNP switch
4. A/T position
5. Control valve with TCM
OFF vehicle
6. Gear system
7. Output shaft
8. Reverse brake
47
Does Not
Change
Does not change M5
→
M4.
ON vehicle
1. PNP switch
2. A/T fluid level and state
3. A/T position
4. Manual mode switch
5. ATF pressure switch 1
6. CAN communication line
7. Control valve with TCM
OFF vehicle
8. Front brake (brake band)
No.
Items
Symptom
Condition
Diagnostic Item
Reference
page
TROUBLE DIAGNOSIS
AT-77
D
E
F
G
H
I
J
K
L
M
A
B
AT
48
Does Not
Change
Does not change M4
→
M3.
Refer to
.
ON vehicle
1. PNP switch
2. A/T fluid level and state
3. A/T position
4. Manual mode switch
5. ATF pressure switch 1 and ATF pressure switch 3
6. CAN communication line
7. Control valve with TCM
OFF vehicle
8. Front brake (brake band)
9. Input clutch
49
Does not change M3
→
M2.
Refer to
.
ON vehicle
1. PNP switch
2. A/T fluid level and state
3. A/T position
4. Manual mode switch
5. ATF pressure switch 6
6. CAN communication line
7. Control valve with TCM
OFF vehicle
8. Front brake (brake band)
9. Input clutch
10. High and low reverse clutch
50
Does not change M2
→
M1.
Refer to
ON vehicle
1. PNP switch
2. A/T fluid level and state
3. A/T position
4. Manual mode switch
5. ATF pressure switch 5
6. CAN communication line
7. Control valve with TCM
OFF vehicle
8. Input clutch
9. High and low reverse clutch
10. Direct clutch
51
Can not be changed
to manual mode.
Refer to
"Cannot Be Changed
to Manual Mode"
ON vehicle
1. Manual mode switch
2. Turbine revolution sensor
3. CAN communication line
52
Others
Shift point is high in
“D” position.
ON vehicle
1. Vehicle speed sensor A/T and vehicle speed sensor MTR
2. Accelerator pedal position sensor
3. CAN communication line
4. A/T fluid temperature sensor
5. Control valve with TCM
No.
Items
Symptom
Condition
Diagnostic Item
Reference
page
AT-78
TROUBLE DIAGNOSIS
53
Others
Shift point is low in “D”
position.
ON vehicle
1. Vehicle speed sensor A/T and vehicle speed sensor MTR
2. Accelerator pedal position sensor
3. CAN communication line
4. Control valve with TCM
54
Judder occurs during
lock-up.
ON vehicle
1. A/T fluid level and state
2. Engine speed signal
3. Turbine revolution sensor
4. Vehicle speed sensor A/T and vehicle speed sensor MTR
5. Accelerator pedal position sensor
6. CAN communication line
7. Torque converter clutch solenoid valve
8. Control valve with TCM
OFF vehicle
9. Torque converter
55
Strange noise in “R”
position.
ON vehicle
1. A/T fluid level and state
2. Engine speed signal
3. CAN communication line
4. Control valve with TCM
OFF vehicle
5. Torque converter
6. Oil pump assembly
7. Gear system
8. High and low reverse clutch
9. Reverse brake
56
Strange noise in “N”
position.
ON vehicle
1. A/T fluid level and state
2. Engine speed signal
3. CAN communication line
4. Control valve with TCM
OFF vehicle
5. Torque converter
6. Oil pump assembly
7. Gear system
57
Strange noise in “D”
position.
ON vehicle
1. A/T fluid level and state
2. Engine speed signal
3. CAN communication line
4. Control valve with TCM
OFF vehicle
5. Torque converter
6. Oil pump assembly
7. Gear system
8. Forward brake (Parts behind drum support is impossible to
perform inspection by disassembly. Refer to
No.
Items
Symptom
Condition
Diagnostic Item
Reference
page
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст