Infiniti G35 (V35). Manual — part 672
PR-8
REAR PROPELLER SHAFT
ASSEMBLY
1.
Install the center bearing with its “F” mark facing the rear of the
vehicle.
2.
Apply multi-purpose grease to the each face of the washer, then
install washer.
3.
Install the center flange onto the propeller shaft with aligning the
marks that are marked while removal.
4.
Install and tighten the lock nut to specified torque. Refer to
.
CAUTION:
Do not use the lock nut.
5.
Place a piece of wood under the center flange, stake the lock
nut against the propeller shaft groove.
6.
Assemble the 1st and 2nd shaft propeller shafts while aligning
the matching marks that are marked during removal.
7.
Install and tighten the bolts/nuts and tighten them to specified
torque. Refer to
.
CAUTION:
Do not reuse the bolts, nuts and washers.
SDIA1542E
SDIA1543E
SDIA1538E
SERVICE DATA AND SPECIFICATIONS (SDS)
PR-9
C
E
F
G
H
I
J
K
L
M
A
B
PR
SERVICE DATA AND SPECIFICATIONS (SDS)
PFP:00030
General Specifications
NDS0001C
Journal Axial Play
NDS0001D
Propeller Shaft Runout
NDS0001E
Applied model
VQ35DE
M/T
A/T
Propeller shaft model
3S80A
Number of joints
3
Coupling method with transmission
Sleeve type
Shaft length
1st (Spider to spider)
619 mm (24.37 in)
581 mm (22.87 in)
2nd (Spider to spider)
902 mm (35.51 in)
Shaft outer diameter
1st
82.6 mm (3.25 in)
2nd
82.6 mm (3.25 in)
Item
Specification
Journal axial play
0 mm (0 in)
Item
Specification
Propeller shaft runout limit
0.8 mm (0.031 in) or less
PR-10
SERVICE DATA AND SPECIFICATIONS (SDS)
PS-1
POWER STEERING SYSTEM
G STEERING
CONTENTS
C
D
E
F
H
I
J
K
L
M
SECTION
A
B
PS
POWER STEERING SYSTEM
PRECAUTIONS . . . . . . . . . . . . . . .. 3
PREPARATION . . . . . . . . . . . . . . ... 4
Special Service Tools . . . . . . . . . . . ... 4
Commercial Service Tools . . . . . . . . . . 5
NOISE, VIBRATION AND HARSHNESS (NVH)
TROUBLESHOOTING . . . . . . . . . . . . 6
NVH Troubleshooting Chart . . . . . . . . . . 6
POWER STEERING FLUID . . . . . . . . . . 7
STEERING WHEEL . . . . . . . . . . . . . 9
On-Vehicle Inspection and Service . . . . . . .. 9
Removal and Installation . . . . . . . . . . .11
REMOVAL . . . . . . . . . . . . . . . 11
INSTALLATION . . . . . . . . . . . . . 11
Disassembly and Assembly . . . . . . . . . 11
STEERING COLUMN . . . . . . . . . . . ... 13
Removal and Installation . . . . . . . . . . 13
Disassembly and Assembly . . . . . . . . . 15
POWER STEERING GEAR AND LINKAGE . . . 19
Removal and Installation . . . . . . . . . . 19
POWER STEERING GEAR . . . . . . . . . .. 22
Disassembly and Assembly . . . . . . . . . 22
POWER STEERING OIL PUMP . . . . . . . ... 31
On-Vehicle Inspection and Service . . . . . . . 31
CHECKING RELIEF OIL PRESSURE . . . . 31
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст