Infiniti G35 (V35). Manual — part 668
PG-66
HARNESS CONNECTOR
HARNESS CONNECTOR (SLIDE-LOCKING TYPE)
●
A new style slide-locking type connector is used on certain systems and components, especially those
related to OBD.
●
The slide-locking type connectors help prevent incomplete locking and accidental looseness or discon-
nection.
●
The slide-locking type connectors are disconnected by pushing or pulling the slider. Refer to the figure
below.
CAUTION:
●
Never pull the harness or wires when disconnecting the connector.
●
Be careful not to damage the connector support bracket when disconnecting the connector.
[Example]
SEL769V
HARNESS CONNECTOR
PG-67
C
D
E
F
G
H
I
J
L
M
A
B
PG
HARNESS CONNECTOR (LEVER LOCKING TYPE)
●
Lever locking type harness connectors are used on certain control units and control modules such as
ECM, ABS actuator and electric unit (control unit), etc.
●
Lever locking type harness connectors are also used on super multiple junction (SMJ) connectors.
●
Always confirm the lever is fully locked in place by moving the lever as far as it will go to ensure full con-
nection.
CAUTION:
Always confirm the lever is fully released (loosened) before attempting to disconnect or connect these
connectors to avoid damage to the connector housing or terminals.
LKIA0670E
1.
Control unit with single lever
A. Fasten
B. Loosen
C. Lever
2.
Control unit with dual levers
A. Levers
B. Fasten
C. Loosen
3.
SMJ connector
A. Lever
B. Fasten
C. Loosen
PG-68
ELECTRICAL UNITS
ELECTRICAL UNITS
PFP:00011
Terminal Arrangement
NKS000QU
CKIM0587E
SMJ (SUPER MULTIPLE JUNCTION)
PG-69
C
D
E
F
G
H
I
J
L
M
A
B
PG
SMJ (SUPER MULTIPLE JUNCTION)
PFP:B4341
Terminal Arrangement
NKS000QV
CKIM0430E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст