Infiniti G35 (V35). Manual — part 807
WW-36
FRONT WIPER AND WASHER SYSTEM
Washer Tube Layout
NKS000MK
Removal and Installation of Front Washer Nozzle
NKS000ML
Replace wiper arm assembly. Refer to
WW-32, "Removal and Installation of Front Wiper Arms, Adjustment of
.
CAUTION:
Removal/installation of the washer nozzle as a unit must not be done.
Removal and Installation of Front Washer Joint
NKS000MM
REMOVAL
1.
Remove upwards while pressing the tab on reverse side.
2.
Remove washer tube.
INSTALLATION
Installation is the reverse order of removal.
CHECK VALVE INSPECTION
Blow check valve. Confirm that the air ventilates. Also confirm that
inhalation is impossible.
Inspection of Front Wiper and Washer Switch Circuit
NKS004OV
Refer to
LT-100, "Combination Switch Inspection"
PKIA1145E
PKIA1900E
PKIA1901E
FRONT WIPER AND WASHER SYSTEM
WW-37
C
D
E
F
G
H
I
J
L
M
A
B
WW
Removal and Installation of Front Wiper and Washer Switch
NKS000MO
REMOVAL
1.
Remove steering column cover. Refer to
2.
Remove mounting bolts of cluster lid A and combination meter.
Refer to
IP-10, "INSTRUMENT PANEL ASSEMBLY"
3.
Disconnect wiper and washer switch connector.
4.
Pull wiper and washer switch toward the passenger door while
pressing pawls in direction shown by the arrow in the figure, and
remove it from the base.
INSTALLATION
Installation is the reverse order of removal.
Removal and Installation of Washer Tank
NKS000MP
REMOVAL
1.
Remove clip and pull washer tank inlet out of washer tank.
2.
Remove fender protector in the right side. Refer to
3.
Remove right half of front bumper fascia. Refer to
4.
Disconnect washer pump connector.
5.
Remove bolts.
6.
Remove washer tube, and remove washer tank from the vehicle.
PKIB6130E
PKIA1147E
PKIB4170E
PKIA1149E
WW-38
FRONT WIPER AND WASHER SYSTEM
INSTALLATION
Installation is the reverse order of removal.
CAUTION:
After installation, add water up to the upper level of the washer tank inlet, and check for water leaks.
Removal and Installation of Front Washer Pump
NKS000MQ
REMOVAL
1.
Remove fender protector in the right side. Refer to
.
2.
Disconnect front washer pump connector and remove washer
tube.
3.
Pull out front washer pump in direction shown by the arrow in
the figure. Remove front washer pump from washer tank.
INSTALLATION
Installation is the reverse order of removal.
CAUTION:
When installing front washer pump, there should be no packing twists, etc.
Washer tank installation bolt and nuts
: 5.7 N·m (0.58 kg-m, 50 in-lb)
PKIC3092E
CIGARETTE LIGHTER
WW-39
C
D
E
F
G
H
I
J
L
M
A
B
WW
CIGARETTE LIGHTER
PFP:35330
Wiring Diagram — CIGAR —
NKS000MR
WITH A/T
TKWM2108E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст