Infiniti G35 (V35). Manual — part 183
INTELLIGENT KEY SYSTEM
BL-119
C
D
E
F
G
H
J
K
L
M
A
B
BL
KEY WARNING LAMP DOES NOT ILLUMINATE
NOTE:
●
Before performing the diagnosis in the following table, check “Trouble Diagnosis Procedure”. Refer to
112, "Trouble Diagnosis Procedure"
●
Make sure that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis,
and check each symptom.
●
If the following “symptoms” are detected, check systems shown in the “Diagnoses/service procedure” col-
umn in this order.
●
Check if ignition switch turns using mechanical key. If it turns, check if “ENGINE START BY I-KEY” in
“WORK SUPPORT” mode is ON.
Conditions of Vehicle (Operating Conditions)
●
Intelligent Key is registered.
●
Key is not inserted in ignition switch.
●
One or more registered Intelligent Keys are in the vehicle.
NON DTC ITEM
NOTE:
●
Before performing the diagnosis in the following table, check “Trouble Diagnosis Procedure”. Refer to
112, "Trouble Diagnosis Procedure"
●
Make sure that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis,
and check each symptom.
●
If the following “symptoms” are detected, check systems shown in the “Diagnoses/service procedure” col-
umn in this order.
Conditions of Vehicle (Operating Conditions)
●
Intelligent Key is registered.
●
Multiple mechanical keys are not set in a keyfob.
(If mechanical keys are near the ignition switch, the operation may not work properly.)
ENGINE START CONDITION CHECK
NOTE:
●
Before performing the diagnosis in the following table, check “Trouble Diagnosis Procedure”. Refer to
112, "Trouble Diagnosis Procedure"
●
If the following “symptoms” are detected, check systems shown in the ”Diagnoses/service procedure” col-
umn in this order.
Symptom
Diagnosis/service procedure
Reference page
Ignition switch does not turn on with Intelligent Key.
[KEY warning lamp does not illuminate.]
1.
Check Intelligent Key unit power supply and ground
circuit.
2.
Check ignition knob switch.
3.
Check key switch.
4.
Replace Intelligent Key unit.
Symptom
Diagnosis/service procedure
Reference page
Non DTC Item
1.
Check key switch.
2.
Check NATS antenna amp.
Symptom
Diagnosis/service procedure
Reference page
Engine start condition check
1.
Check park position switch.
2.
Check stop lamp switch.
BL-120
INTELLIGENT KEY SYSTEM
DOOR LOCK/UNLOCK FUNCTION MALFUNCTION
NOTE:
●
Before performing the diagnosis in the following table, check “Trouble Diagnosis Procedure”. Refer to
112, "Trouble Diagnosis Procedure"
●
Make sure that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis,
and check each symptom.
●
If the following “symptoms” are detected, check systems shown in the “Diagnosis/procedure” column in
this order.
Conditions of Vehicle (Operating Conditions)
●
“LOCK/UNLOCK BY I-KEY” is ON when setting on CONSULT-II.
●
Ignition switch is not depressed.
●
All doors are closed.
Symptom
Diagnosis/service procedure
Reference page
Door lock/unlock do not operate by request switch.
1.
Check door switch.
2.
Check ignition knob switch.
3.
Replace Intelligent Key unit.
Door lock/unlock does not operate by request
switch (driver side).
1.
Check door request switch (driver side).
2.
Check outside key antenna (driver side).
3.
Replace Intelligent Key unit.
Door lock/unlock does not operate by request
switch (passenger side).
1.
Check door request switch (passenger side).
2.
Check outside key antenna (passenger side).
3.
Replace Intelligent Key unit.
Selective unlock function does not operate by door
request switch (driver side) (other door lock func-
tion operate properly).
1.
Check “SELECT UNLOCK FUNCTION” setting in
“WORK SUPPORT”.
2.
Replace Intelligent Key unit.
Auto lock function does not operate properly.
1.
Check “AUTO RELOCK TIMER” setting in “WORK
SUPPORT”.
2.
Check key switch.
3.
Check ignition knob switch.
4.
Check door switch.
5.
Replace Intelligent Key unit.
Key reminder function does not operate properly.
1.
Check “ANTI KEY LOCK IN FUNCTION” setting in
“WORK SUPPORT”.
2.
Check door switch.
3.
Check inside key antenna.
4.
Check unlock sensor.
5.
Check Intelligent Key battery inspection.
6.
Replace Intelligent Key unit.
INTELLIGENT KEY SYSTEM
BL-121
C
D
E
F
G
H
J
K
L
M
A
B
BL
REMOTE KEYLESS ENTRY FUNCTION MALFUNCTION
NOTE:
●
Before performing the diagnosis in the following table, check “Trouble Diagnosis Procedure”. Refer to
112, "Trouble Diagnosis Procedure"
●
Make sure that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis,
and check each symptom.
●
If the following “symptoms” are detected, check systems shown in the “Diagnosis/service procedure” col-
umn in this order.
Conditions of Vehicle (Operating Conditions)
●
Ignition switch is not depressed.
●
All doors are closed.
Symptom
Diagnosis/service procedure
Reference
page
All of the remote keyless entry functions
do not operate.
1.
Check Intelligent Key battery inspection.
2.
Replace Intelligent Key unit.
Selective unlock function does not operate
by Intelligent Key remote control button.
1.
Check “SELECT UNLOCK FUNCTION” setting in “WORK SUP-
PORT”.
2.
Check Intelligent Key battery inspection.
3.
Replace Intelligent Key unit.
Auto lock function does not operate prop-
erly.
1.
Check “AUTO RELOCK TIMER” setting in “WORK SUPPORT”.
2.
Check key switch.
3.
Check ignition knob switch.
4.
Check door switch.
5.
Replace Intelligent Key unit.
Key reminder function does not operate
properly.
1.
Check “ANTI KEY LOCK IN FUNCTION” setting in “WORK SUP-
PORT”.
2.
Check door switch.
3.
Check inside key antenna.
4.
Check unlock sensor.
5.
Check Intelligent Key battery inspection.
6.
Replace Intelligent Key unit.
Panic alarm function does not operate
properly.
1.
Check “PANIC ALARM DELAY” setting in “WORK SUPPORT”.
2.
Theft warning operation check.
3.
Check Intelligent Key battery inspection.
4.
Check key switch.
5.
Check ignition knob switch.
6.
Replace Intelligent Key unit
Trunk open function does not operate
properly.
1.
Check “TRUNK OPEN DELAY” setting in “WORK SUPPORT”.
2.
Check trunk lid opener system.
3.
Check trunk lid lock assembly (trunk room lamp switch)
4.
Check Intelligent Key battery inspection.
5.
Replace Intelligent Key unit
BL-122
INTELLIGENT KEY SYSTEM
TRUNK OPEN FUNCTION MALFUNCTION
NOTE:
●
Before performing the diagnosis in the following table, check “Trouble Diagnosis Procedure”. Refer to
112, "Trouble Diagnosis Procedure"
●
Make sure that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis,
and check each symptom.
●
If the following “symptoms” are detected, check systems shown in the “Diagnosis/service procedure” col-
umn in this order.
Conditions of Vehicle (Operating Conditions)
●
“LOCK/UNLOCK BY I-KEY” is ON when setting on CONSULT-II.
●
Trunk cancel switch is in ON position.
HAZARD AND HORN REMINDER FUNCTION MALFUNCTION
NOTE:
●
Before performing the diagnosis in the following table, check “Trouble Diagnosis Procedure”. Refer to
112, "Trouble Diagnosis Procedure"
●
Make sure that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis,
and check each symptom.
●
If the following “symptoms” are detected, check systems shown in the “Diagnosis/service procedure” col-
umn in this order.
Conditions of Vehicle (Operating Conditions)
●
Ignition switch is not depressed.
●
All doors are closed.
Symptom
Diagnosis procedure
Reference page
Trunk open function does not operate by trunk
opener request switch.
1.
Check trunk opener request switch.
2.
Check outside key antenna (rear bumper).
3.
Replace Intelligent Key unit.
Symptom
Diagnosis/service procedure
Reference page
Hazard reminder does not operate properly
by request switch.
(Horn reminder operate properly.)
1.
Check “HAZARD ANSWER BACK” setting in “WORK
SUPPORT”.
2.
Check hazard function with hazard switch.
3.
Replace Intelligent Key unit
Horn reminder does not operate properly by
request switch.
(Hazard reminder operate properly.)
1.
Check “ANSWER BACK WITH I-KEY LOCK” or
“ANSWER BACK WITH I-KEY UNLOCK” setting in
“WORK SUPPORT”.
2.
Check Intelligent Key warning buzzer (engine room).
3.
Check horn function.
4.
Check IPDM E/R operation.
5.
Replace Intelligent Key unit
Hazard reminder does not operate properly
by Intelligent Key remote control button.
(Horn reminder operate properly.)
1.
Check “HAZARD ANSWER BACK” setting in “WORK
SUPPORT”.
2.
Check hazard function.
3.
Replace Intelligent Key
Horn reminder does not operate properly by
Intelligent Key remote control button (door
lock/unlock button).
(Hazard reminder operate properly.)
1.
Check “HORN WITH KEYLESS LOCK” setting in “WORK
SUPPORT”.
2.
Check Intelligent Key warning buzzer (engine room).
3.
Check horn function.
4.
Check IPDM E/R operation.
5.
Replace Intelligent Key unit
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст