Infiniti G35 (V35). Manual — part 541
POWER WINDOW SYSTEM
GW-35
C
D
E
F
G
H
J
K
L
M
A
B
GW
Check Passenger Side Power Window Motor Circuit
NIS000EM
1.
CHECK POWER WINDOW SUB-SWITCH OUTPUT SIGNAL
1.
Turn ignition switch ON.
2.
Check voltage between power window sub-switch connector and ground.
OK or NG
OK
>> GO TO 2.
NG
>> Replace power window sub-switch.
2.
CHECK POWER WINDOW MOTOR (PASSENGER SIDE) CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect power window sub-switch and passenger side power window motor connector.
3.
Check continuity between power window sub-switch connector
D43 terminals 8, 9 and passenger side power window motor
connector D38 terminals 1, 2.
OK or NG
OK
>> Replace passenger side power window motor.
NG
>> Repair or replace harness.
Check Limit Switch Circuit (Driver Side)
NIS000EN
1.
CHECK DRIVER SIDE LIMIT SWITCH SIGNAL
1.
Turn ignition switch ON.
2.
Check voltage between driver side power window motor connector and ground.
OK or NG
OK
>> Limit sw circuit is OK.
NG
>> GO TO 2.
Connector
Terminals (Wire color)
Condition
Voltage (V)
(Approx.)
(+)
(-)
D43
8 (L)
Ground
Closing
Battery voltage
Opening
0
9 (G)
Closing
0
Opening
Battery voltage
PIIA3811E
9 (G) – 1 (G)
:Continuity should exist.
8 (L) – 2 (L)
:Continuity should exist.
PIIA8377E
Connector
Terminals (Wire color)
Condition
Voltage (V)
(Approx.)
(+)
(-)
D9
5 (OR)
Ground
Driver side door window is
between fully-open and
just before fully-closed
position (ON)
0
Driver side door window is
between just before fully-
closed position and fully-
closed position (OFF)
5
PIIA8378E
GW-36
POWER WINDOW SYSTEM
2.
CHECK LIMIT SWITCH GROUND CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect driver side power window motor connector.
3.
Check continuity between driver side power window motor con-
nector D9 terminal 6 and ground.
OK or NG
OK
>> GO TO 4.
NG
>> GO TO 3.
3.
CHECK HARNESS CONTINUITY
1.
Disconnect power window main switch connector.
2.
Check continuity between power window main switch connector
D7 terminal 14 and driver side power window motor connector
D9 terminal 6.
OK or NG
OK
>> Replace power window main switch.
NG
>> Repair or replace harness.
4.
CHECK POWER WINDOW MAIN SWITCH OUTPUT SIGNAL
1.
Turn ignition switch ON.
2.
Check voltage between power window main switch connector
D7 terminal 9 and ground.
OK or NG
OK
>> GO TO 5.
NG
>> Replace power window main switch.
6 (PU) – Ground
:Continuity should exist.
PIIA8379E
14 (PU) – 6 (PU)
Continuity should exist.
PIIA8380E
9 (OR) – Ground
:Approx. 5V
PIIA2447E
POWER WINDOW SYSTEM
GW-37
C
D
E
F
G
H
J
K
L
M
A
B
GW
5.
CHECK HARNESS CONTINUITY
1.
Turn ignition switch OFF.
2.
Disconnect power window main switch connector.
3.
Check continuity between power window main switch connector
D7 terminal 9 and driver side power window motor connector D9
terminal 5.
OK or NG
OK
>> GO TO 6.
NG
>> Repair or replace harness.
6.
CHECK LIMIT SWITCH
1.
Connect power window main switch and driver side power window motor connector.
2.
Check continuity between driver side power window motor connector D9 terminal 5 and 6.
*: When checking continuity, turn ignition switch OFF.
OK or NG
OK
>> Check the condition of the harness and the connector.
NG
>> Replace driver side power window motor.
Check Limit Switch Circuit (Passenger Side)
NIS000EO
1.
CHECK POWER WINDOW LIMIT SWITCH SIGNAL
1.
Turn ignition switch ON.
2.
Check voltage between passenger side power window motor connector and ground.
OK or NG
OK
>> Limit sw circuit is OK.
NG
>> GO TO 2.
9 (OR) – 5 (OR)
: Continuity should exist.
PIIA8381E
Connector
Terminal (Wire color)
Condition
Continuity
D9
5 (OR)
6 (PU)
Driver side door window is
between fully-open and
just before fully-closed
position (ON)
Yes*
Driver side door window is
between just before fully-
closed position and fully-
closed position (OFF)
No*
PIIA8382E
Connector
Terminals (Wire color)
Condition
Voltage (V)
(Approx.)
(+)
(-)
D38
5 (OR)
Ground
Passenger side door win-
dow is between fully-open
and just before fully-closed
position (ON)
0
Passenger side door win-
dow is between just before
fully-closed position and
fully-closed position (OFF)
5
PIIA8383E
GW-38
POWER WINDOW SYSTEM
2.
CHECK LIMIT SWITCH GROUND CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect passenger side power window motor connector.
3.
Check continuity between passenger side power window motor
connector D38 terminal 6 and ground
OK or NG
OK
>> GO TO 4.
NG
>> GO TO 3.
3.
CHECK HARNESS CONTINUITY
1.
Disconnect power window sub-switch connector.
2.
Check continuity between power window sub-switch connector
D43 terminal 3 and passenger side power window motor con-
nector D38 terminal 6.
OK or NG
OK
>> Replace power window sub-switch.
NG
>> Repair or replace harness.
4.
CHECK POWER WINDOW SUB-SWITCH OUTPUT SIGNAL
1.
Turn ignition switch ON.
2.
Check voltage between power window sub-switch connector
D43 terminal 15 and ground.
OK or NG
OK
>> GO TO 5.
NG
>> Replace power window sub-switch.
6 (PU) – Ground
:Continuity should exist.
PIIA8384E
3 (PU) – 6 (PU)
:Continuity should exist.
PIIA8385E
15 (OR) – Ground
:Approx. 5V
PIIA2452E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст