Infiniti G20 (P11). Manual — part 425
Self-diagnosis
=NCHA0021
INTRODUCTION AND GENERAL DESCRIPTION
NCHA0021S01
The self-diagnostic system diagnoses sensors, door motors, blower motor, etc. by system line. Refer to appli-
cable sections (items) for details. Shifting from normal control to the self-diagnostic system is accomplished
by starting the engine (turning the ignition switch from “OFF” to “ON”) and pressing “
” switch for at least
5 seconds. The “
” switch must be pressed within 10 seconds after starting the engine (ignition switch is
turned “ON”). This system will be canceled by either pressing
(AUTO) switch or turning the ignition switch
“OFF”. Shifting from one step to another is accomplished by means of pushing
(HOT) or
(COLD) switch,
as required.
Additionally shifting from STEP 5 to AUXILIARY MECHANISM is accomplished by means of pushing
(fan)
UP switch.
RHA453GA
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
BT
SC
EL
IDX
TROUBLE DIAGNOSES
AUTO
Self-diagnosis
HA-31
STEP-BY-STEP PROCEDURE
=NCHA0021S02
1
SET IN SELF-DIAGNOSTIC MODE
1. Turn ignition switch ON.
2. Set in self-diagnostic mode as follows. Within 10 seconds after starting engine (ignition switch is turned “ON”.), press
switch for at least 5 seconds.
©
GO TO 2.
2
STEP 1 - LEDs AND SEGMENT ARE CHECKED
Do all LEDs and segments illuminate?
RHA454GA
Yes or No
Yes
©
GO TO 3.
No
©
Malfunctioning
switch, LED or fluorescent display tube.
Replace A/C auto amp.
3
CHECK TO ADVANCE SELF-DIAGNOSIS STEP 2
1. Press
(HOT) switch.
2. Advance to self-diagnosis STEP 2?
Yes or No
Yes
©
GO TO 4.
No
©
Malfunctioning
(HOT) switch.
Replace A/C auto amp.
4
CHECK TO RETURN SELF-DIAGNOSIS STEP 1
1. Press
(COLD) switch.
2. Return to self-diagnosis STEP 1?
Yes or No
Yes
©
GO TO 5.
No
©
Malfunctioning
(COLD) switch.
Replace A/C auto amp.
TROUBLE DIAGNOSES
AUTO
Self-diagnosis (Cont’d)
HA-32
5
STEP 2 - SENSOR CIRCUITS ARE CHECKED FOR OPEN OR SHORT CIRCUIT
Press
(HOT) switch.
Does code No.
appear on the display?
RHA970DB
Yes or No
Yes
©
GO TO 6.
No
©
GO TO 13.
6
STEP 3 - MODE DOOR AND INTAKE DOOR POSITIONS ARE CHECKED
Press
(HOT) switch.
Does code No.
appear on the display?
RHA869DD
Yes or No
Yes
©
GO TO 7.
No
©
GO TO 14.
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
BT
SC
EL
IDX
TROUBLE DIAGNOSES
AUTO
Self-diagnosis (Cont’d)
HA-33
7
STEP 4 - OPERATION OF EACH ACTUATOR IS CHECKED
Press
(HOT) switch.
Engine running.
Press DEF switch, code No. of each actuator test is indicated on the display.
RHA495A
©
GO TO 8.
TROUBLE DIAGNOSES
AUTO
Self-diagnosis (Cont’d)
HA-34
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст