Infiniti G20 (P11). Manual — part 338
SEL012D
4.
After repair has been completed, check repaired wire for con-
tinuity. This check should be conducted 10 minutes after silver
composition is deposited.
Do not touch repaired area while test is being conducted.
SEL013D
5.
Apply a constant stream of hot air directly to the repaired area
for approximately 20 minutes with a heat gun. A minimum dis-
tance of 3 cm (1.2 in) should be kept between repaired area
and hot air outlet. If a heat gun is not available, let the repaired
area dry for 24 hours.
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
BT
HA
SC
IDX
REAR WINDOW DEFOGGER
Filament Repair (Cont’d)
EL-129
System Description
NCEL0079
Refer to Owner’s Manual for audio system operating instructions.
Power is supplied at all times
I
through 15A fuse (No. 38, located in the fuse and fusible link box)
I
to speaker amp. terminal 11, and
I
through 10A fuse [No. 24, located in the fuse block (J/B)]
I
to audio terminal 6.
With the ignition switch in the ACC or ON position, power is supplied
I
through 7.5A fuse [No. 10, located in the fuse block (J/B)]
I
to audio terminal 10.
Ground is supplied through the case of the audio.
Ground is supplied
I
to speaker amp. terminal 23,
I
through body grounds B109 and B110.
Audio signals are supplied
I
through audio terminals 1, 2, 3, 4, 13, 14, 15 and 16
I
to speaker amp. terminals 4, 5, 6, 7, 17, 18, 19 and 20.
Audio signals are amplified by the speaker amp.
The amplified audio signals are supplied
I
through speaker amp. terminals 1, 2, 12, 13, 14, 15, 25 and 26
I
to terminals 1 and 2 of the front door speaker LH and RH
I
to terminals 1 and 2 of the tweeter LH and RH
I
to terminals 1 and 2 of the rear speaker LH and RH.
AUDIO
System Description
EL-130
Wiring Diagram — AUDIO —
NCEL0081
TEL513B
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
BT
HA
SC
IDX
AUDIO
Wiring Diagram — AUDIO —
EL-131
TEL913A
AUDIO
Wiring Diagram — AUDIO — (Cont’d)
EL-132
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст