Infiniti G35 (2008 year). Manual — part 15

Keypad
Send a dial tone to the caller for using network

services such as voice mail.
Cancel Mute
This will appear after “Mute” is selected. Mute

will be canceled.
To adjust the caller’s voice to be louder or

quieter, push the volume control switch (+ or

2)

on the steering wheel or turn the volume control

knob on the instrument panel while talking on

the phone. This adjustment is also available in

the SETTING mode.

Phone setting

To set up the Bluetooth

T Hands-Free Phone

System to your preferred settings, push the

SETTING button on the instrument panel and

select the “PHONE” key on the display, and

then push the

ENTER button.

Phonebook
See “Phonebook registration” earlier in this

section for adding, editing and deleting a con-

tact.

Downloaded Phonebook
Refer to the following information for each item.
● Download All

Download all of the contacts registered in

the Bluetooth

T cellular phone’s BluetoothT

support. Availability of this function de-

pends on each cellular phone. The memory

downloading procedure from the cellular

phone also varies according to each cellular

phone. See cellular phone Owner’s Manual

for more details.

● Delete Downloaded Phonebook

Delete a downloaded phonebook.

SAA1580

SAA1581

4-64

Monitor, climate, audio, phone and voice recognition systems

w

—

—

07/14/07—pattie

X

● Delete an Entry of Downloaded Phonebook

Delete an entry from the downloaded phone-

book.

Automatic Hold
If this item is turned on, an incoming call will be

placed on hold automatically after several

rings.
Use Vehicle Ringtone
If this item is turned on, a specific ringtone that

is different from the cellular phone’s will sound

when receiving a call.
Delete Call Logs
Delete all of the incoming or outgoing call logs

from the list.
Bluetooth Setup
See the following information for each item.
● Bluetooth

If this setting is turned off, the connection

between the cellular phone and the in-

vehicle phone module will be canceled.

● Bluetooth Info

Check information about the device name,

device PIN and connection status.

● Pair Phone

See “Pairing procedure” later in this section.

● Priority Change

Use this command to change the priority

level of the active phone.

The priority level determines which phone

will be connected to the system when more

than one paired Bluetooth

T phone is in the

vehicle.

The system states the priority level of the

active phone and asks for a new priority

level (1, 2, 3, 4, 5).

If the new priority level is already being used

for another phone, the two phones will swap

priority levels.

For example, if the current priority levels are:

Priority Level 1 = Phone A

Priority Level 2 = Phone B

Priority Level 3 = Phone C

and you change the priority level of Phone C

to Level 1, then:

Priority Level 1 = Phone C

Priority Level 2 = Phone B

Priority Level 3 = Phone A

● Remove Paired Phone

Delete a registered cellular phone from the

paired list.

● Paired Phone List

Up to 5 registered cellular phones are shown

on the list. If you select a cellular phone that

is different from the one currently being

connected, the newly selected phone will be

connected to the system.

● Edit Phone Name

Rename the registered cellular phones using

the keypad displayed on the screen. (See

“HOW TO USE TOUCH SCREEN (models with

navigation system)” earlier in this section.)

MODELS WITHOUT NAVIGATION

SYSTEM
Initialization

When the ignition switch is turned to the ON

position, INFINITI Voice Recognition is initial-
ized, which takes a few seconds. If the

button is pushed before the initialization com-

pletes, the system will announce “Hands-free

phone system not ready” and will not react to

voice commands.

Monitor, climate, audio, phone and voice recognition systems

4-65

w

—

—

07/14/07—pattie

X

Operating tips

To get the best performance out of the INFINITI

Voice Recognition system, observe the follow-

ing:
● Keep the interior of the vehicle as quiet as

possible. Close the windows to eliminate

surrounding noises (traffic noises, vibration

sounds, etc.), which may prevent the system

from recognizing voice commands correctly.

● Wait until the tone sounds before speaking a

command. Otherwise, the command will not

be received properly.

● Start speaking a command within 5 seconds

after the tone sounds.

● Speak in a natural voice without pausing

between words.

Giving voice commands

To operate INFINITI Voice Recognition, push and

release the

button located on the steer-

ing wheel. After the tone sounds, speak a

command.
The command given is picked up by the micro-

phone, and voice feedback is given when the

command is accepted.

● If you need to hear the available commands

for the current menu again, say “Help” and

the system will repeat them.

● If a command is not recognized, the system

announces, “Command not recognized.

Please try again.” Repeat the command in a

clear voice.

● If you want to go back to the previous

command, you can say “Go back” or “Cor-

rection” any time the system is waiting for a

response.

● You can cancel a command when the system

is waiting for a response by saying, “Cancel”

or “Quit.” The system announces “Cancel”

and ends the voice recognition (VR) session.

You can also push the

button on the

steering wheel at any time. Whenever the VR

session is canceled, a double beep is played

to indicate you have exited the system.

● If you want to adjust the volume of the voice

feedback, push the volume control switches

(+ or

2) on the steering wheel while being

provided with feedback. You can also use

the radio volume control knob.

How to say numbers
INFINITI Voice Recognition requires a certain

way to speak numbers in voice commands.

Refer to the rules and examples below.
● Either “zero” or “oh” can be used for “0”.

Example: 1-800-662-6200

—“One eight oh oh six six two six two oh

oh”, or

—“One eight zero zero six six two six two oh

oh”

● Words can be used for the first 4 digits

places only.

Example: 1-800-662-6200

—“One eight hundred six six two six two oh

oh”,

—NOT “One eight hundred six six two sixty

two hundred, and

—NOT “One eight oh oh six six two sixty two

hundred.

4-66

Monitor, climate, audio, phone and voice recognition systems

w

—

—

07/14/07—pattie

X

● Numbers can be spoken in small groups. The

system will prompt you to continuing enter-

ing digits, if desired.

Example: 1-800-662-6200

—“One eight oh oh”

The system repeats the numbers and

prompts you to enter more.

—“six six two”

The system repeats the numbers and

prompts you to enter more.

—“six two oh oh”

● You can say “Star” for * and “Pound” for # at

anytime in any position of the phone num-

ber.

Example: 1-555-1212 *123

—“One five five five one two one two star

one two three”

NOTE:
For best results, say phone numbers as single

digits.

Control buttons

The control buttons for the Bluetooth

T Hands-

Free Phone System are located on the steering

wheel.

TALK/PHONE SEND

Push the

button to initiate a VR ses-

sion or answer an incoming call.
You can also use the

button to skip

through system feedback and to enter com-

mands during a call. (See “List of voice

commands” later in this section and “During

a call” earlier in this section for more infor-

mation.)

PHONE END

Push the

button to cancel a VR session

or end a call.

Getting started

The following procedures will help you get

started using the Bluetooth

T Hands-Free Phone

System with INFINITI Voice Recognition. For

additional command options, see “List of voice

commands” later in this section.

Choosing a language

You can interact with the Bluetooth

T Hands-

Free Phone System using English, Spanish or

French.
See “HOW TO USE SETTING BUTTON” earlier in

this section to change the language.

SAA1582

Monitor, climate, audio, phone and voice recognition systems

4-67

w

—

—

07/14/07—pattie

X

Pairing procedure

1. Push the

button on the steering

wheel. The system announces the avail-

able commands.

2. Say: “Setup”

s

A

. The system acknowl-

edges the command and announces the

next set of available commands.

3. Say: “Pair phone”

s

B

. The system ac-

knowledges the command and announces

the next set of available commands.

4. Say: “New phone”

s

C

. The system ac-

knowledges the command and asks you

to initiate pairing from the phone handset

s

D

.

When you are asked to enter a PIN code for

pairing your Bluetooth

T cellular phone, op-

erate it to enter the code “1234”.
The code is always “1234” regardless of the

number of phones paired.
The pairing procedure of the cellular phone

varies according to each cellular phone.

Availability of specific features is dependent

upon the phone’s Bluetooth

T support. See

the cellular phone Owner’s Manual for de-

tails.

You

can

also

visit

www.infiniti.com/bluetooth for instructions

on pairing INFINITI recommended cellular

phones and a list of approved devices.

5. The system asks you to say a name for the

phone

s

E

.

If the name is too long or too short, the

system tells you, then prompts you for a

name again.
Also, if more than one phone is paired and

the name sounds too much like a name

already used, the system tells you, then

prompts you for a name again.

6. The system asks you to assign a priority

level

s

F

. The priority level determines

which phone is active when more than

one paired Bluetooth

T phone is in the

vehicle. Follow the instructions provided

by the system or see “Setup” later in this

section for more information on changing

priorities.

7. The system will ask if you would like to

select a custom ringtone

s

G

. Follow the

instructions provided by the system or

see “Setup” later in this section for more

information on selecting ringtones.

Making a call by entering a phone

number

1. Push the

button on steering wheel.

A tone will sound.

2. Say: “Call”

s

A

. The system acknowledges

the command and announces the next set

of available commands.

4-68

Monitor, climate, audio, phone and voice recognition systems

w

—

—

07/05/07—pattie

X

3. Say the number you wish to call

s

B

. For

example, 555-1212 can be said as “five

five five one two one two.” (See “How to

say numbers” earlier in this section for

more information.) For better recognition,

you can separate the digits into groups,

for example, “five five five”, then “one

two one two”.

4. When you have finished speaking the

phone number, the system repeats it back

and announces the available commands.

5. Say: “Dial”

s

C

. The system acknowledges

the command and makes the call.

For additional command options, see “List of

voice commands” later in this section.

Receiving a call

When you hear the ringtone, press the

button on the steering wheel.
Once the call has ended, press the

button on the steering wheel.

NOTE:
If you do not wish to take the call when you hear

the ringtone, press the

button on the

steering wheel to reject the call.
For additional command options, see “List of

voice commands” later in this section.

List of voice commands

When you push and release the

button

on the steering wheel, you can choose from the

commands on the Main Menu. The following

pages describe these commands and the com-

mands in each sub-menu.
Remember to wait for the tone before speaking.
You can say “Help” to hear the list of commands

currently available any time the system is wait-

ing for a response.
If you want to end an action without completing

it, you can say “Cancel” or “Quit” at any time

while the system is waiting for a response. The

system will end the VR session. Whenever the

VR session is canceled, a double beep is played

to indicate you have exited the system.
If you want to go back to the previous com-

mand, you can say “Go back” or “Correction”

anytime the system is waiting for a response.
When you get used to the menus in the system,

you can talk ahead by saying more than one

command at a time. For example, say, “Call five

five five one two one two” or “Memo pad

record.”
Also, when you get used to the system re-

sponses, you can skip ahead to the tone by

pressing the

button on the steering

wheel. However, if you press the

button

when the system is waiting for a response from

you it will end the VR session.

SAA1583

Monitor, climate, audio, phone and voice recognition systems

4-69

w

—

—

07/14/07—pattie

X

Call

<Name> (speak name)
If you have stored entries in the Phone Book,

you can dial a number associated with a name

and location.
See “Phone book” later in this section to learn

how to store entries.
When prompted by the system, say the name of

the phone book entry you wish to call. The

system acknowledges the name.
If there are multiple locations associated with

the name, the system asks you to choose the

location.

Once you have confirmed the name and loca-

tion, the system begins the call.
<Number> (speak digits)
When prompted by the system, say the number

you wish to call. (See “How to say numbers”

earlier in this section and “Making a call by

entering a phone number” earlier in this section

for more details.)
“Redial”
Use the Redial command to call the last number

that was dialed within the vehicle.

NOTE:
The system will not redial the last number dialed

by the handset keypad.
The system acknowledges the command, re-

peats the number and begins dialing.
If a redial number does not exist, the system

announces, “There is no number to redial” and

ends the VR session.
“Callback”
Use the Call Back command to dial the number

of the last incoming call within the vehicle.
The system acknowledges the command, re-

peats the number and begins dialing. If a call

back number does not exist, the system an-

nounces, “There is no number to call back” and

ends the VR session.
During a call
During a call there are several command op-

tions available. Press the

button on the

steering wheel to mute the receiving voice and

enter commands.
● “Help” — The system announces the avail-

able commands.

● “Go back/Correction” — The system an-

nounces “Go back,” ends the VR session and

returns to the call.

● “Cancel/Quit” — The system announces

“Cancel,” ends the VR session and returns to

the call.

● “Send/Enter/Call/Dial” — Use the Send

command to enter numbers during a call. For

example, if you were directed to dial an

extension by an automated system:

Say: “Send one two three four.”

The system acknowledges the command and

sends the tones associated with the num-

bers. The system then ends the VR session

and returns to the call.

SAA1584

4-70

Monitor, climate, audio, phone and voice recognition systems

w

—

—

07/14/07—pattie

X

● “Transfer Call” — Use the Transfer Call com-

mand to transfer the call from the

Bluetooth

T Hands-Free Phone System to the

cellular phone when privacy is desired.

The system announces, “Transfer call. Call

transferred to privacy mode.” The system

then ends the VR session.

You can also issue the Transfer Call com-

mand again to return to a hands-free call

through the vehicle.

● “Mute” — Use the Mute command to mute

your voice so the other party cannot hear it.

Use the mute command again to unmute

your voice.

NOTE:
If the other party ends the call or the cellular

phone network connection is lost while the Mute

feature is on, the Mute feature may need to be

reset to “off.”

Phone book

The Phone Book stores up to 40 names for each

phone paired with the system. Each name can

have up to 4 locations/phone numbers associ-

ated with it.

NOTE:
Each phone has its own separate phone book.

You cannot access Phone A’s phone book if you

are currently connected with Phone B.
“New Entry”
Use the New Entry command to store a new

name in the system.

When prompted by the system, say the name

you would like to give the new entry.

For example, say: “Mary.”

If the name is too long or too short, the system

tells you, then prompts you for a name again.
Also, if the name sounds too much like a name

already stored, the system tells you, then

prompts you for a name again.
Once the system accepts the name and you

confirm it is correct, the system asks for a

location (Home, Office, Mobile or Other).

For example, say: “Home.”

The system acknowledges the location.
The system will ask you to say a phone number

or to transfer a phone number stored in the

cellular phone’s memory.
To enter a phone number by voice command:
For example, say: “five five five one two one

two.” (See “How to say numbers” earlier in this

section for more information.)
To transfer a phone number stored in the

cellular phone’s memory (if so equipped):
Say “Transfer entry.” The system acknowledges

the command and asks you to initiate the

transfer from the phone handset. The new

SAA1585

Monitor, climate, audio, phone and voice recognition systems

4-71

w

—

—

07/14/07—pattie

X

contact phone number will be transferred from

the cellular phone via the Bluetooth

T commu-

nication link.
The transfer procedure varies according to each

cellular phone. Availability of specific features

is dependent upon the phone’s Bluetooth

T sup-

port. See the cellular phone Owner’s Manual for

details.

You

can

also

visit

www.infiniti.com/bluetooth for instructions on

transferring phone numbers from INFINITI rec-

ommended cellular phones.
The system repeats the number and prompts

you for the next command. When you have

finished entering numbers, choose “Store.”
The system confirms the name, location and

number. The system then asks if you would like

to store another location for the same name. If

you do not wish to store another location, the

system ends the VR session.
“Edit”
Use the Edit command to alter an existing

phone book entry or to add a 2nd, 3rd or 4th

phone number to an existing entry.
When prompted by the system, say the name of

the entry you wish to edit.
The system acknowledges the name and asks

you for the location you would like to edit.

Say the name of the location.
The system acknowledges the location.
The system will ask you to say a phone number

or to transfer a phone number stored in the

cellular phone’s memory.
To enter a phone number by voice command:
For example, say: “five five five one two one

two.” (See “How to say numbers” earlier in this

section for more information.)
To transfer a phone number stored in the

cellular phone’s memory (if so equipped):
Say “Transfer entry.” The system acknowledges

the command and asks you to initiate the

transfer from the phone handset. The new

contact phone number will be transferred from

the cellular phone via the Bluetooth

T commu-

nication link.
The transfer procedure varies according to each

cellular phone. Availability of specific features

is dependent upon the phone’s Bluetooth

T sup-

port. See the cellular phone Owner’s Manual for

details.

You

can

also

visit

www.infiniti.com/bluetooth for instructions on

transferring phone numbers from INFINITI rec-

ommended cellular phones.

The system repeats the number and prompts

you for the next command. When you have

finished entering numbers, choose “Store.”
The system confirms the name, location and

number, then announces that the entry has

been stored. The system then ends the VR

session.
“Delete”
Use the Delete command to erase one entry

from the phone book, all entries from the phone

book, the current redial number or the current

call back number.
To delete entries from the phone book, say a

name or “All entries” when prompted by the

system.
The system acknowledges the command and

asks you to confirm the deletion.
To delete the current redial number or call back

number, say “redial number” or “call back

number” when prompted by the system.
If a redial number or a call back number exists,

the system deletes them without asking for

confirmation.
If there is no number for the entry you are trying

to delete, the system says so and ends the VR

session.

4-72

Monitor, climate, audio, phone and voice recognition systems

w

—

—

07/05/07—pattie

X

“List Name”
Use the List Names command to hear all the

names and locations in the phone book.
The system recites the phone book entries but

does not include the actual phone numbers.

When the playback of the list is complete the

system ends the VR session.
You can stop the playback of the list at any time

by pressing the

button on the steering

wheel. The system ends the VR session.

Memo pad

The Memo Pad records a maximum of 6 voice

memos, each up to 20 seconds long.
“Play”
The system plays back all the memos in the

order of newest to oldest. The system ends the

VR session.
If there are no memos recorded, the system

announces “No messages to play.” The system

ends the VR session.
“Record”
The system announces “Recording” and a tone

sounds signaling you to begin.

Speak the information you wish to record

clearly. When you are done, press the

or

button on the steering wheel.

A tone sounds and the system announces

“Memo recorded.” Another tone sounds to end

the VR session.
If the memo pad is full, the system asks if you

wish to record over the oldest memo.
“Delete”
The Delete command erases all memos. The

system asks you to confirm this action before

deleting all memos.

SAA1586

Monitor, climate, audio, phone and voice recognition systems

4-73

w

—

—

07/05/07—pattie

X

Setup

Use the Setup command to change options

associated with the Bluetooth

T Hands-Free

Phone System.
“Pair Phone”
Use the Pair Phone command to pair a phone to

the Bluetooth

T Hands-Free Phone System.

When you are asked to enter a PIN code for

pairing your Bluetooth

T cellular phone, operate

it to enter the code “1234”.
The code is always “1234” regardless of the

number of phones paired.

Up to 5 phones can be paired. If you try to pair

a sixth phone, the system announces that you

must first delete one phone or replace an

existing phone.
If you try to pair a phone that has already been

paired to your vehicle’s system, the system

announces the name the phone is already us-

ing. The pairing procedure will then be can-

celed.
When prompted by the system, choose from the

following commands:
● “New phone” — see “Pairing procedure”

earlier in this section.

● “Replace phone” — The system announces

the names of the phones already paired and

asks which you would like to replace.

Once you say the name of the phone you

wish to replace, the paring procedure will

begin. (See “Pairing procedure” earlier in

this section.)

● “List phone” — See the description below.
“List Phones”
Use the List Phone command to hear the names

of the phones currently paired. If no phones are

paired, the system announces, “No paired

phones to list.” The system then ends the VR

session.
“Select Phone”
Use the Select Phone command to select a

phone of lesser priority when two or more

phones paired with Bluetooth

T Hands-Free

Phone System are in the vehicle at the same

time.
The system asks you to name the phone and

confirm the selection.
Once the selection is confirmed, the selected

phone remains active until the ignition switch is

turned OFF or you select a new phone.
“Change Priority”
Use the Change Priority command to change the

priority level of the active phone.
The priority level determines which phone is

active when more than one paired Bluetooth

T

phone is in the vehicle.
The system states the priority level of the active

phone and asks for a new priority level (1, 2, 3,

4, 5).
If the new priority level is already being used for

another phone, the two phones will swap prior-

ity levels.

SAA1587

4-74

Monitor, climate, audio, phone and voice recognition systems

w

—

—

07/14/07—pattie

X

For example, if the current priority levels are:

Priority Level 1 = Phone A

Priority Level 2 = Phone B

Priority Level 3 = Phone C

and you change the priority level of Phone C to

Level 1, then:

Priority Level 1 = Phone C

Priority Level 2 = Phone B

Priority Level 3 = Phone A

“Delete Phone”
Use the Delete Phone command to delete a

specific phone or all phones from the

Bluetooth

T Hands-Free Phone System.

The system announces the names of the phones

already paired with the system and their priority

level. The system then gives you the option to

delete a specific phone, all phones or listen to

the list again.
Once you choose to delete a phone or all

phones, the system asks you to confirm this

action.

NOTE:
When you delete a phone, the associated phone

book for that phone will also be deleted.

“Select Ring tone”
Use the Select Ring tone command to select the

tone heard in the vehicle when an incoming call

is received.
The system announces the name of the active

phone and asks you to choose from the follow-

ing commands:
● “Ringtone” — The system plays a ringtone

and asks if you would like to select that

tone. If you say no, the system plays the next

ringtone available and continues to cycle

through the ringtones until you select one or

quit.

● “Silent” — The system asks you to confirm

your wish to disable the ringtone.

SPEAKER ADAPTATION (SA) MODE

Speaker Adaptation allows up to two out-of

dialect users to train the system to improve

recognition accuracy. By repeating a number of

commands, the users can create a voice model

of their own voice that is stored in the system.

The system is capable of storing a different

speaker adaptation model for memory A and

memory B.
If memory A is available, the system will use

memory A to store the model. If memory A is in

use and memory B is available, the system will

use memory B to store the model. If both of the

memory locations are in use, the system will

ask the user to select which memory location

should be overwritten.

Training procedure

The procedure for training a voice is as follows.
1. Position the vehicle in a reasonably quiet

outdoor location.

2. Sit in the driver’s seat with the engine

running, the parking brake on, and the

transmission in Park.

3. Press and hold the

button for more

than 5 seconds.

4. The system announces: “Press the

PHONE/SEND (

) button for the

hands-free phone system to enter the

speaker adaptation mode.

5. Press the

button.

6. Voice memory A or memory B is selected

automatically. If both memory locations

are already in use, the system will prompt

you to overwrite one. Follow the instruc-

tions provided by the system.

7. When preparation is complete and you are

ready to begin, the press the
button.

Monitor, climate, audio, phone and voice recognition systems

4-75

w

—

—

07/14/07—pattie

X

8. The SA mode will be explained. Follow the

instructions provided by the system.

9. When training is finished, the system will

tell you an adequate number of phrases

have been recorded.

10. The system will ask you to say your

name. Follow the instructions to register

your name.

11. The system will announce that speaker

adaptation has been completed and the

system is ready.

The SA mode will stop if:
● The

button is pressed for more than 5

seconds in SA mode.

● The vehicle is driven during SA mode.
● The ignition switch is pushed to the OFF or

LOCK position.

Training phrases

During the SA mode, the system instructs you to

say the following phrases.
(The system will prompt you for each phrase.)
● phone book new entry
● dial three oh four two nine

● delete call back number
● setup pair phone
● memo pad play
● eight pause nine three two pause seven
● delete all entries
● call seven two four zero nine
● phone book delete entry
● memo pad record
● dial star two one seven oh
● Yes
● No
● select ringtone
● dial eight five six nine two
● Bluetooth on
● setup change priority
● call three one nine oh two
● nine seven pause pause three oh eight
● Cancel
● call back number

● call star two zero nine five
● delete phone
● dial eight three zero five one
● Home
● four three pause two nine pause zero
● delete redial number
● phone book list names
● call eight oh five four one
● Correction
● setup change ringtone
● dial seven four oh one eight
● setup main menu
● Delete
● dial nine seven two six six
● memo pad delete
● call seven six three oh one
● go back
● call five six two eight zero
● dial six six four three seven

4-76

Monitor, climate, audio, phone and voice recognition systems

w

—

—

07/14/07—pattie

X

TROUBLESHOOTING GUIDE

The system should respond correctly to all voice commands without difficulty. If problems are encountered, try the following solutions.
Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved.

Symptom

Solution

System fails to interpret the com-
mand correctly.

1. Ensure that the command is valid. (See “List of voice commands” earlier in this section.)
2. Ensure that the command is spoken after the tone.
3. Speak clearly without pausing between words and at a level appropriate to the ambient noise level in the
vehicle.
4. Ensure that the ambient noise level is not excessive (for example, windows open or defroster on). NOTE: If it is
too noisy to use the phone, it is likely that the voice commands will not be recognized.
5. If more than one command was said at a time, try saying the commands separately.
6. If the system consistently fails to recognize commands, the voice training procedure should be carried out to
improve the recognition response for the speaker. (See “SPEAKER ADAPTATION (SA) MODE” earlier in this section.)

The system consistently selects the
wrong entry from the phone book.

1. Ensure that the phone book entry name requested matches what was originally stored. This can be confirmed by
using the “List Names” command. (See “Phone book” earlier in this section.)
2. Replace one of the names being confused with a new name.

Monitor, climate, audio, phone and voice recognition systems

4-77

w

—

—

07/05/07—pattie

X

INFINITI Voice Recognition allows hands-free

operation of the systems equipped on this

vehicle, such as the display, audio, climate

control, phone and optional navigation sys-

tems.
To operate INFINITI Voice Recognition, push and
release the TALK

switch located on the

steering wheel. Then speak the command for

the system you wish to activate. The command

given is picked up by the microphone, and it is

performed when it is properly recognized. At

this time INFINITI Voice Recognition will provide

a voice and message (in the center display) to

inform you of the command results.

COMMAND LIST
Displaying command list

If you are controlling the system by voice

commands for the first time or do not know the

appropriate voice command, perform the fol-

lowing procedure for displaying the voice com-

mand list and help list.

1. Push the

INFO button on the instrument

panel.

2. Highlight the “

Voice Recognition ” key

using the INFINITI controller and push the

ENTER button.

3. Highlight the “

Command List ” key using

the INFINITI controller and push the

ENTER

button.

4. Highlight a category using the INFINITI

controller and push the

ENTER button.

SAA1545

SAA1590

INFINITI VOICE RECOGNITION SYSTEM

(models with navigation system)

4-78

Monitor, climate, audio, phone and voice recognition systems

w

—

—

07/14/07—pattie

X

5. Highlight an item using the INFINITI con-

troller and push the

ENTER button.

6. If necessary, scroll the screen using the

INFINITI controller to view the entire list.

7. Press the

BACK button to return to the

previous screen.

SAA1593

Monitor, climate, audio, phone and voice recognition systems

4-79

w

—

—

07/05/07—pattie

X