Volkswagen Golf / Golf GTI / Jetta. Manual — part 1156
01-16
Output Diagnostic Test Mode
Speaker
Indicated on display
Speakers are tested with a test
current.
If a speaker circuit is detected as
faulty by the system, a DTC will be
stored in DTC memory.
- Check DTC memory.
- If necessary repair wiring or
speaker, erase DTC memory and
repeat Output Diagnostic Test
Mode
- Press
button.
Output Diagnostic Test Mode
Output Radio Display Instrument Cluster
Indicated on display:
- Press
button.
Output Diagnostic Test Mode
END
Indicated on display:
- Press
button.
Rapid data transfer
HELP
Select function XX
Indicated on display (select
function):
- End output (function 06)
Page
01-19
.
Radio system - Premium IV and Premium V (including Monsoon) through 11.01,...
13/2/2005
01-17
Diagnostic Trouble Code
(DTC) memory, erasing
(function 05)
Note:
After erasing the DTC memory its
contents will automatically be
indicated. If the DTC memory cannot
be erased, again check DTC
memory and repair malfunctions.
Requirements
DTC memory checked
Page
01-8
All malfunctions repaired.
After Diagnostic Trouble Code (DTC)
memory has been successfully
checked:
Rapid data transfer
HELP
Select function XX
Indicated on display:
- Press keys -0- and 5 to select
"Erase DTC memory" function 05.
Rapid data transfer
Q
05 Erase DTC memory
Indicated on display:
- Confirm entry with key Q.
Rapid data transfer
DTC memory is erased!
Indicated on display:
The DTC memory is now erased.
- Press
key.
Rapid data transfer
HELP
Select function XX
Indicated on display:
Radio system - Premium IV and Premium V (including Monsoon) through 11.01,...
13/2/2005
01-18
Notes:
Warning!
DTC memory was not checked
If this appears in the display, the
test sequence is faulty.
Rapid data transfer
DTC memory was not checked
If this appears in the display, the
test sequence is faulty.
Adhere exactly to test sequence:
First check DTC memory, if
necessary repair malfunctions,
then erase.
Radio system - Premium IV and Premium V (including Monsoon) through 11.01,...
13/2/2005
01-19
End Output (function 06)
- Press buttons -0- and -6- to select "End output"
function 06.
Rapid data transfer
Q
06 End output
Indicated on display:
- Press -Q- button to confirm input.
Rapid data transfer
Help
Enter address word XX
Indicated on display:
- Switch off ignition.
- Disconnect VAG 1551 Scan Tool (ST).
Radio system - Premium IV and Premium V (including Monsoon) through 11.01,...
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст