Volkswagen Golf / Golf GTI / Jetta. Manual — part 1045
01-91
Output Diagnostic Test Mode
END
Indicated on display:
- Press
button.
Output Diagnostic Test Mode
END
Indicated on display, instrument
cluster MMO:
Function is unknown or
cannot be carried out at the moment
Indicated on display, instrument
cluster VDO:
End Output Diagnostic Test Mode
for VDO instrument clusters by
pressing
button.
All actual values are displayed
again.
Rapid data transfer
HELP
Select function XX
Indicated on display:
- Press buttons -0- and -6- to select
function 06, "End Output".
Rapid data transfer
Q
06 - End Output
Indicated on display:
- Press -Q- button to confirm input.
Rapid data transfer
Help
Enter address word XX
Indicated on display:
The tester is now in basic function
again.
Instrument cluster m.y. 2000 through m.y. 2001, On Board Diagnostic (OBD)
13/2/2005
01-92
Diagnostic Trouble Code
(DTC) memory, erasing
(function 05)
Note:
After DTC memory is erased, its
contents are automatically output. If
DTC memory cannot be erased,
check DTC memory again and repair
malfunction.
Prerequisites
DTC memory checked
Page
01-76
.
All malfunctions repaired.
After successful DTC memory
check:
Rapid data transfer
HELP
Select function XX
Indicated on display:
- Press buttons -0- and -5- to select
"Erase DTC memory" function 05.
Rapid data transfer
Q
05 Erase DTC memory
Indicated on display:
- Press -Q- button to confirm input.
Rapid data transfer
DTC memory is erased!
Indicated on display:
DTC memory is erased.
- Press
button.
Rapid data transfer
HELP
Select function XX
Indicated on display:
Instrument cluster m.y. 2000 through m.y. 2001, On Board Diagnostic (OBD)
13/2/2005
01-93
Notes:
WARNING!
DTC memory was not checked
If this appears in the display, the
test sequence is faulty.
Rapid data transfer
DTC memory was not checked
Note:
After erasing the DTC memory its
contents will automatically be
indicated. If the DTC memory cannot
be erased, again check DTC
memory and repair malfunctions.
If this appears in the display, the
test sequence is faulty.
Follow test sequence exactly:
first check DTC memory, repair
malfunction(s) if necessary, then
erase.
Instrument cluster m.y. 2000 through m.y. 2001, On Board Diagnostic (OBD)
13/2/2005
01-94
End Output (function 06)
- Press buttons -0- and -6- to select "End Output"
function 06.
Rapid data transfer
Q
06 - End Output
Indicated on display:
- Press -Q- button to confirm input.
Rapid data transfer
HELP
Enter address word XX
Indicated on display:
- Switch off ignition.
- Disconnect VAG 1551 from Data Link Connector
(DLC).
Instrument cluster m.y. 2000 through m.y. 2001, On Board Diagnostic (OBD)
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст